AnyTone MINI CB Manuel utilisateur
KNOW ABOUT THIS RADIO
1Squelch control, SQ, ASQ switch key
2Mode/Scan key
3RF Gain control
4CH9/CH19/Keypad lock
5Power On/Off Volume control
6LCD
7External speaker Jack
8Antenna Jack
MINI CB RADIO
USER MANUAL
163
24
5
8
7
Squelch level control(O.F to 2.8 level available)
ASQ control(A.1-A.9 level available)
Mode control
Short press
1. , until LCD displays SQ and then displays X.X, X.X stands for SQ
level, the bigger value stands for high squelch level.
Short press [
2. UP ] or [ DN ] to change SQ level.
Hold [
3. UP ] or [ DN ] can fast change SQ level.
Hold
4. or wait for 3 seconds to store and exit.
Note：The higher SQ level selected, the stronger signal required to open
speaker and hear the calling.
Hold
1. key, until LCD displays AQ, the ASQ function turned on. The LCD will
displays "A.X", "X" stands for the ASQ level, the bigger value stands for high
squelch level.
Short press microphone [
2. UP ] or [ DN ] to change SQ level
Hold microphone [
3. UP ] or [ DN ] can fast change ASQ level.
Hold
4. or wait for 3 seconds to store and exit.
Note：The higher ASQ level selected, the stronger signal required to open
speaker and hear the calling.
Short press
1. key to switch between AM /FM mode.
The LCD displays the selected mode.
2.
Channel Control
Short press [
1. UP ] or [ DN ] to change working channel.
Hold [
2. UP ] or [ DN ] can fast change working channel.
HOW TO USE THIS RADIO
Power On/Off the radio
Volume control
Turn VOL switch clockwise to power on the radio, the LCD displays the Norms
1.
and then displays channel number.
Turn VOL switch anti-clockwise, until hear Ka Ta, the radio is powered off.
2.
Turn clockwise to increase volume, anti-clockwise to decrease volume.
Note：When RFG function is on the LCD displays R if RFG level is 6 means the
attenuation is 6dBm.
Note：In lock Mode all keys except PTT is valid.
Scan function
RF Gain contro
Emergency Channel
Keypad Lock
Norms control
Install external speaker
Resume factory default
Hold
1. to start scan function, "SC" falshes in the LCD;
Press [
2. UP ] or [ DN ] to change scan direction during scan;
Press
3. or [PTT] key to exit scan function.
Short press
1. key, LCD displays R and the present RF gain level ashes.
Short press microphone [
2. UP ] or [ DN ] to change level.
Short press
3. key to exit RF gain level control.
Short press
1. key to choose CH9, the channel number ashes.
Short press
2. key again to choose CH19, the channel number ashes.
Short press
3. key third time to return to last normal channel.
Hold
1. key for over 2 seconds to lock the keys, LCD displays "LC".
Hold
2. key for over 2 seconds again to unlock the keys, LCD displays OF.
Hold
1. to power on radio, until LCD displays the norms;
Press [
2. UP ] or [ DN ] to choose wanted norms;
Power off and power on again.
3.
Choose a 8Ω external speaker with 3.5mm mono connector.
Hold
1. key to power on radio, until the LCD displays "RT", the resume work
nish.
All channel and function setting will resume factory default after above operation.
2.
RECEIVER
Sensitivity Less than 1uV for 10dB(S+N)/N
Image Rejection 70dB
Adjacent Channel Rejection 60dB
IF Frequencies 1st 10.695MHz
2nd 455KHz
Automatic Gain Control(AGC) Less than 10dB change in audio
Output for inputs from 10 to 50000uV
Squelch less than 1uV
Audio Output Power 1Watts
Frequency Response 300-3000Hz
TRANSMITTER
Power Output 4 WattsFM/AM
Transmission interference inferior to 4nW(-54dBm)
Frequency Response 300-3000Hz
Modulated signal distortion inferior to 5%
Output Impedance 50 ohms
SPECIFICATION
GENERAL
Modulation Mode AM/FM
Frequency Range 26.565-27.99125MHz
Frequency Tolerance 0.005%
Input Voltage 13.2V
Dimensions(in mm) 104x108x25cm
Weight 416g
Ferquency Control PLL Synthesizer
Operating Temperature
Range -20℃to +50℃
Current Drain
Transmit with push-to-talk /UP/DN and coiled cord
Receive 2A MAX
VOL Max Squelched 0.3A
Weight 0.8A
Antenna Connector UHF,SO-239
Autres manuels AnyTone Radio
AnyTone
AnyTone AT- 778UV Manuel utilisateur
AnyTone
AnyTone AT-D868UV Mode d'emploi
AnyTone
AnyTone AT 778 Manuel utilisateur
AnyTone
AnyTone AM-580 Manuel utilisateur
AnyTone
AnyTone AT-588UV Manuel utilisateur
AnyTone
AnyTone AT-5555 Manuel utilisateur
AnyTone
AnyTone ARES II Manuel utilisateur
AnyTone
AnyTone AT-5555 PLUS Manuel utilisateur
AnyTone
AnyTone AT-398UV Manuel utilisateur
AnyTone
AnyTone GRACES Manuel utilisateur
AnyTone
AnyTone Apollo II Manuel utilisateur
AnyTone
AnyTone 868 Manuel utilisateur
AnyTone
AnyTone AT-300M Manuel utilisateur
AnyTone
AnyTone AT-D578UV Manuel utilisateur
AnyTone
AnyTone SMART Manuel utilisateur
AnyTone
AnyTone AT888 Manuel utilisateur
AnyTone
AnyTone DMR AT-D878U Manuel utilisateur
AnyTone
AnyTone APOLLO I Manuel utilisateur
AnyTone
AnyTone AT-318UV Manuel utilisateur
AnyTone
AnyTone METIS Manuel utilisateur
