Antec VP650PM Manuel utilisateur
1
VP650PM
POWER SUPPLY
USER’S MANUAL
2
VP650PM
The VP650PM is the perfect power supply for the entry-level user, providing stable power, quiet
cooling, and advanced cable management for improved airflow and ease-of-use. No twinkly lights or
glittery paint jobs –a 120 mm fan for effective and quiet cooling, dual +12V rails for amazingly stable
power, heavy-duty protection circuitry and Active Power Factor Correction (PFC) that saves money on
corporate power bills. And it comes with all the assurance of Antec’s AQ2 Antec Quality 2-year limited
warranty. All the features, none of the waste: for builders that are strictly business, the VP650PM is
strictly power.
STANDARDS AND FEATURES
The connectors and power specifications of the VP650PM PSU are all compatible with ATX12V v2.32 &
EPS12V v2.92 specifications. This power supply also features Active Power Factor Correction (PFC),
which improves the power factor value of the power supply by altering the input current wave shape,
helping to power transmission across the grid.
SYSTEM PROTECTION
A variety of industrial-grade safety circuitry will help protect your computer: Over Current Protection
(OCP), Over Voltage Protection (OVP), Short Circuit Protection (SCP), Over Power Protection (OPP) &
Over Temparature Protection (OTP). Sometimes the PSU will “latch” into a protected state. You will
need to power off the PSU and clear the fault before it will function again. There are no user-
replaceable fuses in your VP650PM.
3
POWER OUTPUT
To see the output capacity and regulation for each different voltage, see table 1.
TABLE 1
Output Voltage
Load Max.
Regulation
Ripple & Noise
+12V₁
35A
± 5%
< 120 mV
+12V₂
35A
± 5%
< 120 mV
+3.3V
24A
± 5%
< 50 mV
+5V
24A
± 5%
< 50 mV
-12V
0.5A
± 10%
< 120 mV
+5Vsb
2.5A
± 5%
< 50 mV
MODULAR CABLE JACKS
There are two 6-pin black jacks and two 8-pin red jacks on the back of your VP650PM PSU. These jacks
are for the optional cables that come with your power supply.
Caution: Please connect only cables provided with this VP650PM. Other cables may not be
compatible!
4
TABLE 2
Cable Quantity
Connectors
Description
Socket
1
X 1
24(20+4)-pin Motherboard
Fixed cable
1
X 1
8(4+4)-pin ATX12V/EPS12V
Fixed cable
1
X 2
8(6+2)-pin PCI-E
8-pin
1
X 3
Molex
Fixed cable
X 1
FDD
1
X 3
SATA
6-pin
X 1
Molex
1
X 3
SATA
Fixed cable
5
INSTALLATION
Install the PSU into either the top or bottom of your case with the four screws provided. Refer to your
case manual if you are unsure where the power supply should be installed.
Connect the 24-pin main power connector to your motherboard.
Connect the 8-pin or 4+4-pin connector for the CPU. If your motherboard has an 8-pin socket with a
cover on some of the openings, we recommend that you remove the cover and use the 8-pin
connector.
Note: Please also refer to your motherboards manual for any special instructions.
6
Connect the AC power cord to the power supply AC inlet. Be sure to use the heavy-duty cord supplied
with your PSU.
PCI-E graphics cards use different amounts of power. For some, a single 6-pin connector is sufficient,
making the hardwired connector the preferred choice. More powerful cards use multiple connectors,
including the advanced 8-pin PCI-E connector. The 8-pin PCI-E connector on the PSU can be used as
either a 6- or 8-pin connector.
Hard drives, optical drives (CD/DVD/BluRay™) and other accessories will use either the older 4-pin
Molex connector or the newer 15-pin SATA connector. 4-pin Molex connectors have two black, one
yellow and one red wire. The SATA connector has an additional orange power wire.
When you have all the connections secured, turn the switch on the PSU to the “|” position.
7
Technical Support:
www.antec.com/support
USA & Canada
1-800-22ANTEC
Europe
+49-(0)40-226-139-22
Asia
+886 (0)800-060-696
Visit us on Facebook for contests, information & support
USA & Canada
facebook.com/AntecInc
Europe
facebook.com/AntecEurope
UK
facebook.com/AntecUK
Australia & New Zealand
facebook.com/AntecAU
India
facebook.com/AntecIndia
Israel
facebook.com/AntecIsrael
Philippines
facebook.com/AntecPH
Antec, Inc.
47900 Fremont Blvd., Fremont, CA 94538 / USA
Tel: 510-770-1200 - Fax: 510-770-1288
www.antec.com
© 2011-2012 Antec, Inc. All rights reserved.
Specifications are subject to change without prior notice. Actual product(s) and accessories may differ from illustrations. Omissions and printing errors
excepted. Content of delivery might differ in different countries or areas. Some trademarks may be claimed as the property of others.
Reproduction in whole or in part without written permission is prohibited.
Table des matières
Autres manuels Antec Alimentation
Antec
Antec HCG-900 Manuel utilisateur
Antec
Antec HCG-750 Manuel utilisateur
Antec
Antec TruePower Classic TP-450C Manuel utilisateur
Antec
Antec ATX12V Manuel utilisateur
Antec
Antec ISK 300-65 Manuel utilisateur
Antec
Antec NeoPower 550 Manuel utilisateur
Antec
Antec NEO ECO 450C Manuel utilisateur
Antec
Antec True Power Quattro Series Manuel utilisateur
Antec
Antec VP450 Manuel utilisateur
Antec
Antec EARTHWATTS Manuel utilisateur
Antec
Antec PP380V Instructions d'utilisation et de sécurité
Antec
Antec TRUEPOWER TP-650 Manuel utilisateur
Antec
Antec HCG-620 Manuel utilisateur
Antec
Antec HCP-850 Manuel utilisateur
Antec
Antec VP550P V2 Manuel utilisateur
Antec
Antec TP-750 Blue Manuel utilisateur
Antec
Antec TruePower Quattro TPQ-1000 Manuel utilisateur
Antec
Antec SmartPower 4 Serial-ATA Manuel utilisateur
Antec
Antec HCP-1200 Manuel utilisateur
Antec
Antec VP630F Manuel utilisateur
