Antec Basiq BP430 Manuel utilisateur

Basiq

BP430

User’s Manual

Manuel de l’utilisateur

Anwenderhandbuch

Manuale per l’operatore

Manual del usuario

Ё᭛Փ⫼᠟ݞ

পᡅ䂀ᯢ᳌

Antec Basiq User’s Manual

ATX12V version 2.2 power supply

Model BP430

Antec Basiq series power supplies are built to be compatible with the ATX12V

version 2.2 specification. They include two 12V output circuits that deliver safer

and more reliable output to your system’s components. In addition we’ve

included a variety of protective circuitry: OCP (Over Current Protection),

OVP (Over Voltage Protection), and SCP (Short Circuit Protection).

BP430 includes Universal Input with Active Power Factor Correction (PFC).

Universal Input allows you to connect your Antec Basic power supply to any AC

power outlet between 100~240V without having to worry about setting a voltage

switch. Active PFC improves the power factor value to the power supply by altering

the input current wave shape, helping the power plant provide power to users

more efficiently.

Power Switch:

This power supply comes with a main power switch. Make sure you turn the

switch to the ON ( I ) position before you boot up your computer for the first time.

In normal operation there is no need to turn the switch to the OFF (O) position

since the power supply is equipped with a soft on/off feature which turns your

computer on and off through the soft switch on your computer case. You may

need to turn the switch to the OFF position occasionally should your computer

crash and you cannot shut it down through use of the soft switch.

Installation:

1. Turn off the hard power switch on your old power supply if any.

2. Open your computer case. Follow the directions provided in your case manual.

3. Disconnect all power connectors from the motherboard and from the peripheral

devices such as case fans, hard drives, optical drives, floppy drives, etc.

4. Disconnect the power cord from your old power supply.

5. Remove the existing power supply from your computer case and replace it

with your new Antec power supply. (Illustration 1)

6. Turn the hard switch on the Antec power supply to the OFF (O) position and

connect the AC power cord to the power supply.

7. Connect the 24-pin Main Power Connector (Illustration 2). If the mother-

board uses a 20-pin connector, detach the 4-pin attachment on the 24-pin

power connector (see pictures 1 and 2).

Note: the detachable 4-pin section cannot be used

in place of a 4-pin +12V connector.

8. Connect the 4-pin (Illustration 3) 12V connector to the motherboard as

needed.

9. If your video card requires a PCI-E Connector, then connect the cable from

the main wire bundle to your video card.

10. Connect the Drives and Accessories Cable to devices such as hard drives,

optical drives, fans, etc.

11. Connect the SATA cable if you are using a Serial ATA hard drives.

12. Close your computer case.

Picture 1 Picture 2

For 24-pin

motherboards

For 20-pin

motherboards

Antec, Inc.

47900 Fremont Blvd.

Fremont, CA 94538

USA

tel: 510-770-1200

fax: 510-770-1288

Antec Europe B.V.

Stuttgartstraat 12

3047 AS Rotterdam

The Netherlands

tel: +31 (0) 10 462-2060

fax: +31 (0) 10 437-1752

Customer Support:

US & Canada

1-800-22ANTEC

[email protected]

Europe

+31 (0) 10 462-2060

[email protected]

www.antec.com

All trademarks are the property of their respective owners.

Reproduction in whole or in part without written permission is prohibited.

Printed in China.

Table des matières

Autres manuels Antec Alimentation

Antec

Antec TP-650C TRUEPOWER Classic Manuel utilisateur

Antec

Antec EA-650 Platinum Manuel utilisateur

Antec

Antec TruePower Trio TP3-430 Guide de l'utilisateur

Antec

Antec HCG-400M Manuel utilisateur

Antec

Antec VP650P Manuel utilisateur

Antec

Antec VP450F Manuel utilisateur

Antec

Antec SMARTPOWER 2.0 Manuel utilisateur

Antec

Antec EARTHWATTS EA-650 Manuel utilisateur

Antec

Antec HCG-850M Manuel utilisateur

Antec

Antec TruePower Quattro 850 Guide de l'utilisateur

Antec

Antec Basiq BP350P Manuel utilisateur

Antec

Antec EarthWatts 350 Green Manuel utilisateur

Antec

Antec HCG-620M Manuel utilisateur

Antec

Antec EA-430D Green Manuel utilisateur

Antec

Antec TruePower Quattro TPQ-1000 Manuel utilisateur

Antec

Antec BP550 PLUS Manuel utilisateur

Antec

Antec TruePower 2.0 Instructions d'utilisation

Antec

Antec Neo ECO Series Manuel utilisateur

Antec

Antec New Solution Series NSK 1480 Manuel utilisateur

Antec

Antec HCG-620 Manuel utilisateur

Antec

Antec ATX12V / 2.03 Manuel utilisateur

Antec

Antec HCG-750M Manuel utilisateur

Antec

Antec PHANTOM 500 Manuel utilisateur

Antec

Antec TruePower Quattro 1000W Manuel utilisateur

Manuels Alimentation populaires d'autres marques

Monacor

Monacor PS-12CCD Manuel utilisateur

VOLTIMA

VOLTIMA MagicBox 15 Manuel utilisateur

Agilent Technologies

Agilent Technologies 6032A Manuel utilisateur

Miller

Miller Auto Deltaweld 452 Manuel utilisateur

BCP

BCP PUOUBK Feuille d'instructions

HC 2210 Manuel utilisateur

Puls

Puls CT5.241 Manuel utilisateur

OCZ

OCZ ZX1250W Manuel utilisateur

iseg

iseg ECH 238 Manuel utilisateur

Power

Power XXL A Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 6631B Manuel utilisateur

Renogy

Renogy PHOENIX 300 Manuel utilisateur

HP 6200B Manuel de service

Epson

Epson Stylus Scan 2500 Manuel d'utilisation

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Manuel utilisateur

Puls

Puls MiniLine ML50.100 Manuel utilisateur

Puls

Puls AS-Interface SLA4.100 Manuel utilisateur

Kenwood

Kenwood PS-60 Manuel utilisateur