Antec P280 Manuel utilisateur

P280

User

Manual

P280 User Manual

Congratulations on your purchase of the Antec P280!

Sophisticated and cutting-edge, the P280 emphasizes the ease of use, quiet technology and unparalleled

performance characteristic of Antec’s Performance One series. This advanced enclosure comes

equipped with features that will maximize your PC experience, from Quiet Computing™ panels & HDD

drive bays, to grommet-lined cable routing holes with ample space behind the motherboard tray. The

P280 accommodates motherboards up to XL-ATX and includes nine expansion slots to support up to four

13.0” / 330 mm graphics cards. And with convenient tool-less optical drive bays, easy-access front &

bottom PSU intake air filters, two front panel USB 3.0 ports and an affordable price, you get an elite

enclosure that will last you for builds to come.

The P280 does not include a power supply. Make sure you choose a power supply that is compatible

with your computer components and has a long enough power harness to reach your motherboard and

peripheral devices. We recommend our High Current Gamer, High Current Pro or EarthWatts power

supplies for the latest ATX specification compliance, broad compatibility, and power savings capability.

At Antec, we continually refine and improve our products to ensure the highest quality. As such, your

new chassis may differ slightly from the description in this manual due to improvements applied for the

optimal building experience. As of November 15, 2011, all features, descriptions, and illustrations in this

manual are correct.

Disclaimer

This manual is intended only as a guide for Antec’s computer

enclosures. For more comprehensive instructions on installing the

motherboard and peripherals, please refer to the manuals that

come with those components.

Table of Contents

Section 1: Introduction

1.1 Getting to Know Your Chassis............................................................................5

1.2 Chassis Specifications.........................................................................................6

1.3 Included Screws .................................................................................................6

1.4 Before You Begin................................................................................................7

Section 2: Hardware Installation

2.1 Setting Up ..........................................................................................................9

2.2 Motherboard Installation...................................................................................9

2.3 Installing KUHLER H2O Liquid Coolers................................................................11

2.4 Power Supply Installation ..................................................................................12

2.5 External 5.25” Device Installation......................................................................13

2.6 Internal 2.5” Device Installation ........................................................................14

2.7 Internal 3.5” / 2.5” Device Installation ..............................................................14

2.8 Cable Management............................................................................................16

Section 3: Front I/O Ports

3.1 USB 2.0...............................................................................................................18

3.2 USB 3.0...............................................................................................................18

3.3 AC’97 / HD Audio Ports......................................................................................19

3.4 Power Switch / Reset Switch / Hard Disk Drive LED Connectors.......................19

3.5 Rewiring Motherboard Header Connections.....................................................20

Section 4: Cooling System

4.1 Included Fans .....................................................................................................22

4.2 Optional Fans .....................................................................................................22

4.3 Air Filters............................................................................................................24

Section 1

Introduction

P280 User Manual

1.1 Getting to Know Your Chassis

1. 3 x 5.25” tool-less drive bays

2. 2 x 2.5” drive trays (dedicated)

3. 6 x 3.5” / 2.5” drive trays

4. 2 x 120 mm top TwoCool™ exhaust fans

5. 1 x 120 mm rear TwoCool™ exhaust fan

6. 2 x 120 mm internal intake fans (optional)

2 x 120 mm front intake fans (optional)

7. 9 expansion slots

8. CPU cutout

9. Cable routing holes

10. Motherboard mount: XL-ATX, Standard ATX, microATX or Mini-ITX

11. Power supply mount / PSU intake filter

12. Front Ports (USB 3.0, USB 2.0, Audio I/O)

1.2 Chassis Specifications

Chassis Type

Super Mid-Tower

Chassis Color

Black with aluminum door

Dimensions

20.7” (H) x 9.1” (W) x 22.1” (D)

526 mm (H) x 231 mm (W) x 562 mm (D)

Weight

22.3 lbs / 10.2 kg

Cooling

- 2 x 120 mm top TwoCool™ exhaust fans

- 1 x 120 mm rear TwoCool™ exhaust fan

- 2 x 120 mm internal intake fans (optional)

- 2 x 120 mm front intake fans (optional)

Drive Bays

- 3 x 5.25” tool-less drive bays

- 6 x 3.5” / 2.5” drive trays

- 2 x 2.5” drive-bays (dedicated)

Expansion Slots

9: supports up to 3-way NVIDIA® SLI® / AMD CrossFireX™

Motherboard Size

XL-ATX [13.6” x 10.3” (345 mm x 262 mm)], Standard ATX, microATX, Mini-ITX

Front I/O Panel

- 2 x USB 3.0 with internal motherboard connector

- 2 x USB 2.0

- Audio In/Out

- Power and Reset buttons located on top panel of chassis

1.3 Included Screws

An inventory of all screws and intended usage and quantity is provided here:

A. Power supply screw (4)

B. Motherboard standoff (4 included, 6 preinstalled)

C. Motherboard screw (10)

D. Optional 5.25” screw / dedicated 2.5” drive bay screw (6)

E. 3.5” tray-mount screw (25)

F. 2.5” tray-mount screw (8)

G. Front fan screw (4)

H. Not pictured: zip ties for cable management (6)

1.4 Before You Begin

In order to ensure that your building experience with the P280 will be a positive one, please take note of

the following:

While working inside your P280, keep your chassis on a flat, stable surface. Make sure your build

environment is clean, well-lit, and free of dust.

Antec chassis feature rounded edges that minimize the occurrence of hand injuries.

Nonetheless, exercise caution and control when handling chassis interiors. We strongly

recommend taking the appropriate time and care when working inside the chassis. Avoid

hurried or careless motions.

Handle components and cards with care. Do not touch the unshielded components or contacts

on a card. Hold a card by its edges. Hold a component such as a processor by its edges, never by

its pins.

To avoid electrostatic discharge, ground yourself periodically by touching an unpainted metal

surface (such as a connector or screw on the back of this computer) or by using a wrist

grounding strap.

Before you connect a cable, ensure that both connectors are correctly aligned and oriented.

Bent pins can be difficult to fix and may require replacement of the entire connector.

This manual is not designed to cover CPU, RAM, or expansion card installation. Please consult

your motherboard manual for specific mounting instructions and troubleshooting. Before

proceeding, check the manual for your CPU cooler to find out if there are steps you must take

before installing the motherboard.

Do not sit on your chassis. Although it is constructed of heavy-duty steel and internally

reinforced, it is not designed to support the weight of an adult, and may buckle.

Remember to use the right tools for each task. Do not use improvised screwdrivers like coins,

nails or knife blades as they may result in damage to screw threads or even injury. Do not use

your fingernails to separate edges or lift the sides of the chassis, as paint chipping or injury may

occur.

Section 2

Hardware Installation

P280 User Manual

2.1 Setting Up

Put the case upright on a flat, stable

surface so that the rear panel (power

supply and expansion slots) is facing you.

To remove the left and right side panels,

remove these thumbscrews first.

Note: Place the panel thumbscrews aside

carefully and remember where they are.

Remove the panel by gripping the end of

the panel at the top & bottom and

swinging the panel outward. Do not pull

the panel back toward the rear of the

chassis.

CAUTION: Do not use your fingernails to pry or lift the panels. Damage to the panels or

injury to your fingernails may result.

2.2 Motherboard Installation

Before proceeding:

Check the manual for your CPU cooler to find out if there are steps you must do before installing the

motherboard.

Make sure you have the correct I/O panel for your motherboard. If the panel provided with the chassis

isn’t suitable, please contact your motherboard manufacturer for the correct I/O panel.

Make sure you have the correct I/O panel.

Remove the panel by the end of the panel at the top & bottom and

swing the panel outward.

The P280 comes with six preinstalled motherboard standoffs. These are positioned for Standard ATX

motherboards but can be relocated to accommodate other form factors.

1. Align the motherboard with the

standoff holes on the motherboard

tray and remember or mark which

holes are lined up

2. Install standoffs as needed and put

the motherboard in.

3. Screw your motherboard into the standoffs with the provided motherboard mounting screws.

Install the motherboard standoffs by aligning the motherboard with the

standoff holes.

CAUTION

Make sure to remove any unused motherboard standoffs. They

may come into contact with the back of the motherboard and may

electrify your chassis exterior if left connected.

Use the provided motherboard mounting screws to secure your

motherboard into the standoffs.

Autres manuels pour P280

Table des matières

Autres manuels Antec Enceinte

Antec

Antec SX800II Series Manuel utilisateur

Antec

Antec NSK 3300 Manuel utilisateur

Antec

Antec Solution SLK2650-BQE User’s Manuel utilisateur

Antec

Antec UCC13# 0761345-15300-3 NA Manuel utilisateur

Antec

Antec GX300 Manuel utilisateur

Antec

Antec VSK-1000 Manuel utilisateur

Antec

Antec Solution SLK1650 User's Manuel utilisateur

Antec

Antec NINE HUNDRED TWO V3 User's Manuel utilisateur

Antec

Antec VSK-2450 Manuel utilisateur

Antec

Antec Super LANBOY Manuel utilisateur

Antec

Antec Solution SLK3700AMB Manuel utilisateur

Antec

Antec Minuet Manuel utilisateur

Antec

Antec Solution SLK3700AMB User’s Manuel utilisateur

Antec

Antec Performance TX635 Manuel utilisateur

Antec

Antec VSK-1000 Manuel utilisateur

Antec

Antec Mini P180 White Manuel utilisateur

Antec

Antec VERIS MX-100 Manuel utilisateur

Antec

Antec Compact Notebook Cooler none Guide de démarrage rapide

Antec

Antec MX-25 Manuel utilisateur

Antec

Antec Veris Fusion Remote Black Manuel utilisateur

Antec

Antec P150 Manuel utilisateur

Antec

Antec NAK3480 Manuel utilisateur

Antec

Antec Mini P180 White Manuel utilisateur

Antec

Antec Veris Fusion Remote Max Guide de démarrage rapide

Manuels Enceinte populaires d'autres marques

SilentiumPC

SilentiumPC Armis AR5 Manuel

Pulsar

Pulsar 17/TRP80/DSPR Manuel utilisateur

Thermaltake

Thermaltake V150 TG Manuel utilisateur

MSI

MSI MPG SEKIRA 500X Manuel utilisateur

Nexans

Nexans WTC05 Manuel utilisateur

Peavey

Peavey DS 1502 Manuel utilisateur

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manuel utilisateur

Rosewill

Rosewill RX82-U(JBOD) Manuel utilisateur

QNAP

QNAP SAS JBOD CLI 1.0 Manuel utilisateur

GAMDIAS

GAMDIAS Talos P1 Manuel utilisateur

Auvs

Auvs KR615 Manuel utilisateur

Digitus

Digitus DA-71114 Manuel utilisateur

CommScope

CommScope FDH 3000 Manuel utilisateur

FS FHD-FWME4 Manuel utilisateur

JBL

JBL CS1215T Manuel utilisateur

Pulsar

Pulsar ARAD-S4 Manuel utilisateur

Pulsar

Pulsar AWO454 Manuel utilisateur

NewerTech

NewerTech Voyager S3 Manuel utilisateur