Antec Super LANBOY Manuel utilisateur

A N

O Y

AI R

OST

ODULAR

OST

USTOMIZABLE

PEN

AIR

HASSIS

S E R

A N U A L

ANBOY

SER

’

ANUAL

Congratulations on our purchase of the Antec LanBo Air.

The LanBo Air is the most modular, most customizable open-air chassis. Nearl ever part on this chassis, down to the

motherboard and PSU mounts, is removable and customizable. The LanBo Air’s cooling s stem allows up to 15

inward-facing fans to create positive internal air pressure, blowing dust and heat out through its panel perforations. Up

front, the ground-breaking AirMount™ HDD s stem literall suspends drives in mid-air for unsurpassed vibration and

noise reduction. With thousands of different possible configurations, two internal 2.5” SSD ba s and a front-panel USB

3.0 port, the LanBo Air is perfect for building just one t pe of computer: Yours.

The LanBo Air comes without a power suppl . Make sure ou choose a power suppl that is compatible with our

computer components and has a long enough power harness to reach our motherboard and peripheral devices. We

recommend our High Current, Signature Series, TruePower Quattro or TP New power supplies for the latest ATX

specification compliance, broad compatibilit , and power savings capabilit .

At Antec, we continuall refine and improve our products to ensure the highest qualit . As such, our new chassis ma

differ slightl from the description in this manual. This isn't a problem; it's simpl an improvement. As of the date of

publication, all features, descriptions, and illustrations in this manual are correct.

Disclaimer

This manual is intended onl as a guide for Antec’s computer enclosures. For more comprehensive

instructions on installing the motherboard and peripherals, please refer to the user’s manuals that

come with those components.

ABLE OF

ONTENTS

ECTION

NTRODUCTION

1.1 Getting to Know our Chassis .................................................................................. 5

1.2 Chassis Specifications ................................................................................................. 6

1.3 Included Screws ........................................................................................................... 6

1.4 Before ou Begin ......................................................................................................... 7

ECTION

ARDWARE INSTALLATION

2.1 Setting up ...................................................................................................................... 9

2.2 Internal 3.5” Device Installation using AirMount™ ............................................. 10

2.3 External 5.25” Device Installation ............................................................................ 10

2.4 Internal 2.5” Device Installation ............................................................................... 11

2.5 Removing and Relocating the Motherboard/PSU ................................................. 13

2.6 Motherboard Installation ........................................................................................... 15

2.7 Power Suppl Installation .......................................................................................... 17

2.8 Cable Management ...................................................................................................... 17

ECTION

RONT

I/O

ORTS

3.1 USB 2.0 ......................................................................................................................... 19

3.2 USB 3.0 ......................................................................................................................... 19

3.3 AC’97 / HD audio ports ............................................................................................ 19

3.4 Front Panel Ground Wire Installation ..................................................................... 20

3.5 Power Switch / Reset Switch / Hard Disk Drive LED Connectors .................. 20

3.6 Rewiring Motherboard Header Connections .......................................................... 21

ECTION

OOLING SYSTEM

4.1 Included Fans ............................................................................................................... 23

4.2 Rear/Side 120 mm TwoCool™ LED Fans ............................................................ 23

4.3 Front 120 mm LED fans with Variable Speed Control ........................................ 24

4.4 Optional Fans .............................................................................................................. 25

4.5 Water Cooling .............................................................................................................. 25

NTRODUCTION

ECTION

1.1

ETTING TO KNOW YOUR CHASSIS

Drive Bays

Hardware Mou ts

1 5.25" drive bays default locatio

10 Removable motherboard tray

2 3.5" AirMou t™ drive bays default locatio

11 Removable power supply mou t

3 2.5" i ter al SSD bay

12 Fro t I/O ports

4 Built-i toolbox for spare screws/parts

13 8 expa sio slots

Cooli g

5 2 x 120 mm top fa mou ts a d water cooli g radiator fitti g

6 1 x 120 mm rear TwoCool™ LED fa

7 2 x 120 mm fro t LED fa s

8 2 x 120 mm TwoCool™ side LED fa s

9 Water cooli g grommets

1.2

HASSIS

PECIFICATIONS

HASSIS

YPE

Mid Tower

HASSIS

OLOR

Yellow

Black

Blue / Black

Red / Black

IMENSIONS

0.4

” (H) x 8.

” (W) x 19.

” (D)

- 517.5 mm (H) x 222 mm (W) x 490 mm (D)

EIGHT

20.3 lbs / 9.2 kg

OOLING

2 x

front

variable

speed 120 mm LED fans

1 x rear TwoCool™ LED fan

2 x side 120 mm TwoCool™ LED fans to cool graphics cards

2 x CPU fan (optional)

6 x side drive ba fan (optional)

2 x top 120 mm fan (optional)

Water cooling capable

RIVE

AYS

x internal 3.5

”

3 x external 5.25”

2 x internal bottom-mounted 2.5” SSD drive

XPANSION

LOTS

OTHERBOARD

IZE

Mini-ITX, microATX, Standard ATX

RONT

I/O

ANEL

1 x USB 3.0

2 x USB 2.0

AC’97 / HD Audio In and Out

NCLUDED

CREWS

The LanBo Air is designed to be extremel flexible. A variet of screws are included to accommodate the multitude of

configurations that are possible with this chassis. The included toolbox depicted in section 1.1 contains most of these

screws. An inventor of all screws and intended usage and quantit is provided here:

A. 5.25” external drive mounting screws (12)

B. Motherboard mounting screws (9)

C. Power suppl mounting screw (4)

D. AirMount™ 3.5” internal drive mounting screws (24)

E. Optional top fan mounting screws (8)

F. Motherboard standoffs (9; 6 preinstalled)

G. Optional side fan mounting screws (10)

H. 2.5” drive mounting screws (8)

Screws included in the toolbox

Case thumbscrew (long)

Case thumbscrew (short)

Power suppl mount release screw

5.25” drive rail mounting screw

Rear panel screw

Front panel /motherboard tra / PSU mount screw

1.4

EFORE

EGIN

In order to ensure that our building experience with the LanBo Air will be a positive one, please take note of the

following:

•While working inside our LanBo Air, keep our chassis on a flat, stable surface. Make sure our build

environment is clean, well-lit, and free of dust.

•Antec chassis feature rounded edges that minimize the occurrence of hand injuries. Nonetheless, exercise

caution and control when handling chassis interiors. We strongl recommend taking the appropriate time and

care when working inside the chassis. Avoid hurried or careless motions. Please use reasonable precaution.

•Handle components and cards with care. Do not touch the components or contacts on a card. Hold a card b

its edges. Hold a component such as a processor b its edges, never b its pins.

•To avoid electrostatic discharge, ground ourself periodicall b touching an unpainted metal surface (such as a

connector or screw on the back of this computer) or b using a wrist grounding strap.

•Before ou connect a cable, ensure that both connectors are correctl aligned and oriented. Bent pins can be

difficult to fix and ma require replacement of the entire connector.

•This manual is not designed to cover CPU, RAM, or expansion card installation. Please consult our

motherboard manual for specific mounting instructions and troubleshooting. Before proceeding, check the

manual for our CPU cooler to find out if there are steps ou must take before installing the motherboard.

•Do not sit on our chassis. Although it is constructed of heav -dut steel and internall reinforced, it is not

designed to support the weight of an adult, and ma buckle.

•Remember to use the right tools for each task. Do not use improvised screwdrivers like coins, nails or knife

blades as the ma result in damage to screw threads or even injur . Do not use our fingernails to separate

edges or lift the sides of the chassis, as paint chipping or injur ma occur.

Note: This manual is not designed to cover CPU, RAM, or expansion card installation. Please

consult our motherboard manual for specific mounting instructions and troubleshooting.

Preinstalled screws

ARDWARE

NSTALLATION

ECTION

2.1 S

ETTING

1. Put the chassis upright on a flat, stable surface so that the rear panel

(power suppl and expansion slots) is facing ou. Remove the

thumbscrews as depicted in Figure 1 on the right, and remove the

corresponding thumbscrews from the other side.

2. Remove the larger panels b pulling them awa from the chassis.

3. Remove the smaller panels b rotating them outward slightl less than

180º (Figure 2), and pulling them off their hinges, starting with the

bottom hinge.

4. The LanBo Air should now look like Figure .

Note: The order in which hardware is installed in this manual is different from that of t pical cases; this is

due to the unique design of the LanBo Air chassis. We recommend that ou follow the order laid

out in this manual, as it takes full advantage of the LanBo Air’s features.

Figure 1 – Side panel thumbscrews

Figure 2 – Rotate smaller panels to

remove

Figure 2 – Rotate smaller panels

outward

and remove the bottom hinge first

Figure 3 – LanBoy Air with side panels

removed

2.2 I

NTERNAL

3.5”

EVICE

NSTALLATION

The LanBo Air utilizes Antec’s revolutionar AirMount™ suspension HDD mounting s stem. This s stem suspends

hard drives in the drive ba s, reducing vibration and subsequent noise. To mount drives using AirMount™:

1. Using four supplied AirMount™ screws (refer to section 1.3) and two AirMount™ mounting brackets (two are

preinstalled in the case, additional brackets are included in a box inside the case), attach the hard drive

mounting brackets to our hard drive, orienting them so that the bottom of the bracket is flush with the

bottom of the hard drive (Figure 4).

2. Determine the horizontal orientation of the drive ou wish to use, and attach the mounting hooks to the

attachment openings closest to the edges of the drive (Figure 5, Figure 6).

3. Mount an other 3.5” HDD devices accordingl .

Note: The next two sections cover installing 3.5” and 5.25” drives in their default locations, with 5.25”

drives on top and 3.5” drives below them. The front fan mounts and drive ba covers can be

removed and relocated to accommodate a number of different mounting configurations.

Figure 5 – Forward-facing 3.5” drive

Figure 6 – Sideways-facing 3.5” drive

Figure 4 – AirMount™ bracket orientation

Autres manuels pour Super LANBOY

Table des matières

Autres manuels Antec Châssis

Antec

Antec GX700 Manuel utilisateur

Manuels Châssis populaires d'autres marques

Advantech

Advantech IPC-623 Series Manuel utilisateur

IMC Networks

IMC Networks iMcV/18 Manuel utilisateur

Chenbro

Chenbro RB13804N4WFT Manuel utilisateur

Lenovo

Lenovo ThinkSystem SR665 V3 Manuel utilisateur

Wuntronic

Wuntronic PCI4DRQ Manuel utilisateur

EtherWAN

EtherWAN EMC400 Manuel utilisateur

Overland Storage

Overland Storage SnapSAN S1000 Mode d’emploi

Philips

Philips LC4.1E A Manuel utilisateur

Supermicro

Supermicro SCF418 Series Manuel utilisateur

Chenbro

Chenbro RM437 Series Manuel utilisateur

Pickering

Pickering 40-914 Manuel utilisateur

HP A7503-S Instructions de montage

Supermicro

Supermicro SC823MTQ-R700LPB Manuel utilisateur

SilverStone

SilverStone RMS08 Series Manuel utilisateur

NI cRIO-FRC II Manuel utilisateur

Pickering

Pickering 65-200 Manuel utilisateur

Allied Telesis

Allied Telesis AT-MMCR18 Manuel utilisateur

Hisense

Hisense MSD6586 Manuel utilisateur