Anritsu NF7500 Series Manuel utilisateur
Document No.: NF7500-W014E-3.0
Cover
ANRITSU CORPORATION
Third Edition
PureFlow WS1
Traffic Shaper
NF7500 series
WebGUI Operation Manual
For safe and appropriate use of the equipment, please
read this manual before using the equipment.
Additional safetyand warning information is provided
within the Operation Manual (NF7500-W011E). Please
also refer to this document before using the equipment.
Keep the manual with the equipment.
ii
Safety Symbols
SafetySymbols
To prevent the risk of personal injury or loss related to equipment malfunction, Anritsu Corporation uses the
following safety symbols to indicate safety-related information. Ensure that you clearly understand the meanings of
the symbols BEFORE using the equipment.
Some or all of the following symbols may be used on all Anritsu Corporation equipment. In addition, there may be
other labels attached to products that are not shown in the diagrams in this manual.
Symbols used in this manual
This indicates a very dangerous procedure that could result in serious injury or
death if not performed properly.
This indicates a hazardous procedure that could result in serious injury or death if
not performed properly.
This indicates a hazardous procedure or danger that could result in light-to-severe
injury, or loss related to equipment malfunction, if proper precautions are not taken.
Safety Symbols Used on Equipment and in Manual
The following safety symbols are used inside or on the equipment near operation locations to provide information
about safety items and operation precautions. Ensure that you clearly understand the meanings of the symbols
and take the necessary precautions BEFORE using the equipment.
This indicates a prohibited operation. The prohibited operation is indicated
symbolically in or near the barred circle.
This indicates an obligatory safety precaution. The obligatory operation is
indicated symbolically in or near the circle.
This indicates a warning or caution. The contents are indicated symbolically in or
near the triangle.
This indicates a note. The contents are described in the box.
PureFlow WS1
Traffic Shaper NF7500 series
WebGUI Operation Manual
31 May 2017(First Edition)
15 June 2020(Third Edition)
Copyright © 2017-2020, ANRITSU CORPORATION
All rights reserved. No part of this manual may be reproduced without the prior written permission of the
publisher.
The contents of this manual may be changed without prior notice.
Printed in Japan
DANGER
WARNING
CAUTION
iii
Anritsu Corporation Contact
For information on this equipment, contact an Anritsu Corporation Service
and Sales office. Contact information can be found on the safety manual.
Maintenance Contract
Anritsu Corporation can provide a range of optional services under a
maintenance contract. For details, contact your dealer.
iv.
Notes On Export Management
This product and its manuals may require an Export License/Approval by
the Government of the product's country of origin for re-export from your
country.
Before re-exporting the product or manuals, please contact us to confirm
whether they are export-controlled items or not.
When you dispose of export-controlled items, the products/manuals need to
be broken/shredded so as not to be unlawfully used for military purpose.
Trademark/Registered Trademark
Windows, Internet Explorer, and Microsoft Edge are trademarks or
registered trademarks of Microsoft Corporation in the United States
and/or other countries.
Firefox is a trademark or registered trademark of Mozilla Foundation in
the United States and/or other countries.
I
About This Manual
This manual describes in detail the operation method of WebGUI used in the
PureFlow WS1 Traffic Shaper (hereafter referred to as “this device”).
The applicable models of this equipment are described below.
NF7501A
The manual of this device consists of the following four manuals. This
document is <4>.
<1> Operation Manual (NF7500–W011E)
Describes in detail the installation and handling of this device.
<2> Command Reference (NF7500–W012E)
Describes in detail the commands used in this device.
<3> Configuration Guide (NF7500–W013E)
Describes the basic features of this device and provides specific
examples of the settings required to build a network using these
features.
<4> WebGUI Operation Manual (NF7500–W014E)
Describes the operation for setting and display of this device using a
Web browser.
If the following documents related to this device or other documents
related to the features of this device are issued, be sure to read them:
Release notes
(For details of the issuance of release notes, contact your dealer.)
II
Table of Contents
About This Manual.......................................... I
Chapter 1 Overview ...................................... 1-1
Chapter 2 Operating Environment................. 2-1
Chapter 3 Operation Method......................... 3-1
3.1 Marks Used in Text.......................................................3-2
3.2 Notes for Settings .........................................................3-3
3.3 How to Log In / Log Out................................................3-4
3.4 Screen Configuration....................................................3-7
3.5 Setting Flow..................................................................3-8
3.6 How to Set Channel......................................................3-9
3.7 How to Set IP Address of Channel...............................3-12
3.8 How to Configure Scenario...........................................3-14
3.9 Application Acceleration Settings .................................3-18
3.10 How to Configure Filter.................................................3-22
3.11 How to Set Rule List .....................................................3-26
3.12 How to Perform Settings Related to Time ....................3-30
3.13 Setting Flow Identification Mode...................................3-37
3.14 How to Display Traffic Graph of Scenario.....................3-39
3.15 How to Display Traffic Graph of Network Port..............3-43
3.16 How to Display WAN-accel Sessions Graph................3-46
3.17 How to Check and Save Configuration.........................3-52
3.18 How to Check System Log ...........................................3-56
3.19 How to Check Module Information................................3-58
3.20 How to Perform Maintenance Operations.....................3-59
III
1
2
3
IV.
(Blank page)
1-1
1
Overview
Chapter 1
Overview
This chapter describes overview of WebGUI.
This device is equipped with WebGUI (Graphical User Interface). WebGUI is
an application to perform settings, display and maintenance of this device by
using the Web browser of the network-connected terminal.
The WebGUI system sketch drawing is shown below:
WebGUI is connected from the system interface. For the system interface
setting method, refer to "PureFlow WS1 Traffic Shaper NF7500 Series
Configuration Guide". Do not exceed four sessions including WebAPI
when using WebGUI.
(1) Connection via the Ethernet port
Figure 1.1 WebGUI system sketch drawing (Ethernet port)
HUB
Terminal
* Connected to the Ethernet port
PureFlow
Chapter 1 Overview
1-2
(2) Connection via the Network port
This device cannot be managed remotely in the bypass connection
state enabled by the network bypass function. To manage this device
remotely in the bypass connection state, connect this device via the
Ethernet port.
Figure 1.2 WebGUI system sketch drawing (Network port)
HUB
Terminal
* Connecting to the Network port
PureFlow
Ce manuel convient aux modèles suivants
2
Table des matières
