Anritsu MS2690 Manuel utilisateur

Document No.: M-W2853AE-32.0

ANRITSU CORPORATION

•

For safety and warning information, please read this

manual before attempting to use the equipment.

•

Additional safety and warning information is provided

within the MS2690A/MS2691A/MS2692A Signal

Analyzer Operation Manual (Mainframe Operation),

MS2830A Signal Analyzer Operation Manual

(Mainframe Operation) or MS2840A Signal Analyzer

Operation Manual (Mainframe Operation). Please also

refer to this document before using the equipment.

•

Keep this manual with the equipment.

MS2690A/MS2691A/MS2692A

and MS2830A/MS2840A

Signal Analyzer

Operation Manual

Signal Analyzer Function

Remote Control

32th Edition

Safety Symbols

To prevent the risk of personal injury or loss related to equipment malfunction, Anritsu Corporation uses the following

safety symbols to indicate safety-related information. Ensure that you clearly understand the meanings of the

symbols BEFORE using the equipment. Some or all of the following symbols may be used on all Anritsu equipment.

In addition, there may be other labels attached to products that are not shown in the diagrams in this manual.

Symbols used in manual

This indicates a very dangerous procedure that could result in serious injury or

death if not performed properly.

This indicates a hazardous procedure that could result in serious injury or death if

not performed properly.

This indicates a hazardous procedure or danger that could result in light-to-severe

injury, or loss related to equipment malfunction, if proper precautions are not taken.

Safety Symbols Used on Equipment and in Manual

The following safety symbols are used inside or on the equipment near operation locations to provide information

about safety items and operation precautions. Ensure that you clearly understand the meanings of the symbols and

take the necessary precautions BEFORE using the equipment.

This indicates a prohibited operation. The prohibited operation is indicated

symbolically in or near the barred circle.

This indicates an obligatory safety precaution. The obligatory operation is indicated

symbolically in or near the circle.

This indicates a warning or caution. The contents are indicated symbolically in or

near the triangle.

This indicates a note. The contents are described in the box.

These indicate that the marked part should be recycled.

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A

Signal Analyzer

Operation Manual Signal Analyzer Function Remote Control

25 April 2007 (First Edition)

20 October 2016 (32th Edition)

publisher.

The contents of this manual may be changed without prior notice.

Printed in Japan

DANGER

WARNING

CAUTION

iii

Notes On Export Management

This product and its manuals may require an Export License/Approval by

the Government of the product's

country of origin for re-

export from your

country.

Before re

exporting the product or manuals, please contact us to confirm

whet

her they are export-controlled items or not.

When you dispose of export

controlled items, the products/manuals need to

be broken/shredded so as not to be unlawfully used for military purpose.

About This Manual

Operation manual configuration

The operation manual configuration of the MS2690A/MS2691A/MS2692A,

MS2830A and MS2840A Signal Analyzer is shown below.

MS2690A/MS2691A/MS2692A Signal Analyzer Operation Manual

(

Main Frame O

eration

)

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A

Signal Analyzer Operation Manual (Phase Noise Measurement Function Operation)

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A

Signal Analyzer Operation Manual (Phase Noise Measurement Function Remote Control)

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A

Signal Analyzer Operation Manual (Main Frame Remote Control)

MS2840A Signal Analyzer Operation Manual

(Main Frame Operation)

Or MS2830A Signal Analyzer Operation Manual

(

Main Frame O

eration

)

MS2690A/MS2691A/MS2692A

Signal Analyzer Operation Manual

(Signal Analyzer Function

Operation)

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A

Signal Analyzer Operation Manual (Signal Analyzer Function Remote Control)

MS2830A/MS2840A

Signal Analyzer Operation Manual

(Signal Analyzer Function

Operation)

MS2690A/MS2691A/MS2692A

Spectrum Analyzer Operation Manual

(Spectrum Analyzer Function

Operation)

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A

Signal Analyzer Operation Manual (Spectrum Analyzer Function Remote Control)

MS2830A/MS2840A

Spectrum Analyzer Operation Manual

(Spectrum Analyzer Function

Operation)

Signal Analyzer Operation Manual (Mainframe Operation)

Signal Analyzer Operation Manual (Mainframe Remote Control)

Description of basic operations, maintenance procedures, common

functions and common remote functions of the mainframe

Signal Analyzer Operation Manual (Signal Analyzer Function)

Signal Analyzer Operation Manual (Signal Analyzer Function Remote

Control) <This document>

Description of basic operations, functions and remote functions of the

signal analyzer

Signal Analyzer Operation Manual (Spectrum Analyzer Function)

Signal Analyzer Operation Manual (Spectrum Analyzer Function Remote

Control)

Description of basic operations, functions and remote functions of the

spectrum analyzer

Signal Analyzer Operation Manual (Phase Noise Measurement Function)

Signal Analyzer Operation Manual (Phase Noise Measurement Function

Remote Control)

Description of basic operations, common functions and common

remote functions of the Phase Noise Measurement function

Convention Used in This Manual

Except where there is a good reason to do otherwise, this manual

assumes the use of MS269xA.

Note that the descriptions in this manual also apply to MS2830A or

MS2840A.

III

Table of Contents

About This Manual........................................ I

Chapter 1 Overview.................................... 1-1

1.1 Overview .................................................................... 1-2

Chapter 2 SCPI Device Message Details.. 2-1

2.1 Frequency Settings.................................................... 2-19

2.2 Level Settings ............................................................ 2-45

2.3 Trigger Settings.......................................................... 2-60

2.4 Capture Setting.......................................................... 2-86

2.5 Marker Settings.......................................................... 2-110

2.6 Signal Search Settings .............................................. 2-161

2.7 Trace Settings............................................................ 2-183

2.8 Measure Common Function Settings ........................ 2-292

2.9 Adjacent Channel Power Measurement Settings ...... 2-304

2.10 Channel Power Measurement Settings ..................... 2-382

2.11 Occupied Bandwidth Measurement Settings............. 2-421

2.12 Burst Average Power Measurement Settings............ 2-454

2.13 AM Depth Measurement Settings.............................. 2-475

2.14 FM deviation Measurement Settings ......................... 2-480

2.15 DigRF 3G Settings..................................................... 2-485

2.16 Setting Replay function.............................................. 2-506

2.17 Sub Trace Settings .................................................... 2-514

2.18 Other Function Settings ............................................. 2-534

2.19 QUEStionable Status Register .................................. 2-556

2.20 OPERation Status Register ....................................... 2-566

2.21 Batch Processing Function Setting............................ 2-573

2.22 Setting External Mixer................................................ 2-579

2.23 FM CW Measurement Settings.................................. 2-587

IV.

Chapter 3 Native Device Message List..... 3-1

3.1 IEEE488.2 Common Device Messages .................... 3-2

3.2 Application Common Device Messages .................... 3-4

3.3 Frequency/Time Settings........................................... 3-7

3.4 Level Settings ............................................................ 3-8

3.5 Measurement/Trigger Settings .................................. 3-9

3.6 Common Settings for Each Trace.............................. 3-10

3.7 Spectrum Trace Settings ........................................... 3-11

3.8 Power vs Time Trace Settings................................... 3-22

3.9 Frequency vs Time Trace Settings............................ 3-27

3.10 CCDF Trace Settings................................................. 3-31

3.11 Spectrogram Trace Settings ...................................... 3-40

3.12 DigRF 3G Measurement Settings.............................. 3-42

3.13 Waveform Data Saving Function Settings................. 3-44

3.14 Replay Function Settings........................................... 3-45

3.15 Sub Trace Settings .................................................... 3-47

3.16 Reference Signal Settings ......................................... 3-49

3.17 Power Adjustment...................................................... 3-50

3.18 Other Settings ............................................................ 3-51

3.19 Setting External Mixer................................................ 3-52

Chapter 4 Native Device Message Details 4-1

Chapter 1 Overview

1-1

Overview

This chapter provides an overview of the remote control of the Spectrum

Analyzer function (hereinafter, referred to as “this application”).

1.1 Overview .................................................................... 1-2

Chapter 1 Overview

1-2.

1.1 Overview

Automatic measurement can be performed by using this instrument in

connection with an external controller (PC). This instrument is

standardly equipped with GPIB, Ethernet, and USB interfaces. You can

also select a remote control command from the SCPI mode, which is a

command format defined by the SCPI Consortium, and Native mode,

which is our unique format.

See the

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A Signal

Analyzer Operation Manual (Mainframe Remote Control)

for how to

switch the language mode.

You can use the Native mode by converting SCPI commands into Native

ones. See the

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A

Signal Analyzer Operation Manual (Mainframe Remote Control)

for

details.

To use the Signal Analyzer function on the MS2830A or MS2840A,

Analysis Bandwidth 10 MHz Option or greater is required.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Anritsu Instrument de mesure

Anritsu

Anritsu Network Master MT9090A Series Manuel utilisateur

Anritsu

Anritsu Spectrum Master MS2721B Manuel utilisateur

Anritsu

Anritsu MS2687B Manuel utilisateur

Anritsu

Anritsu MS9740B Manuel utilisateur

Anritsu

Anritsu ML2437A Manuel du propriétaire

Anritsu

Anritsu Site Master S251C Manuel utilisateur

Anritsu

Anritsu PIM Master MW8208A Manuel utilisateur

Anritsu

Anritsu FieldMaster MS2080A Manuel utilisateur

Anritsu

Anritsu MS2711A Manuel utilisateur

Anritsu

Anritsu MX269017A Manuel utilisateur

Anritsu

Anritsu MS2070A Manuel utilisateur

Anritsu

Anritsu MS2720 A Series Manuel utilisateur

Anritsu

Anritsu MG9637A Manuel utilisateur

Anritsu

Anritsu Field Master Manuel utilisateur

Anritsu

Anritsu MT8820C Instructions d'installation et d'utilisation

Anritsu

Anritsu VectorStar ME7848A Series Manuel utilisateur

Anritsu

Anritsu MS2024A Manuel d'utilisation et d'entretien

Anritsu

Anritsu VectorStar ME7838 Series Manuel utilisateur

Anritsu

Anritsu MT9085 Series Manuel d'instructions

Anritsu

Anritsu MP1800A Manuel utilisateur

Anritsu

Anritsu Spectrum Master MS2721A Manuel utilisateur

Anritsu

Anritsu VectorStar ME7838G4 Manuel utilisateur

Anritsu

Anritsu MT1100A Network Master Flex Manuel utilisateur

Anritsu

Anritsu VNA Master MS202 B Series Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur