anko PS5 Manuel utilisateur
PS5 LED STAND
User Manual
43133444
This product supports both vertical and parallel console placement, can be assembled
directly under the original console base.
Technical Specifications
- Compatible with: PS5 original console
- Input voltage: DC 5V
- Supplying current: 50 mA(max)
-Product material: ABS/PC
- Cable length: 30cm
- Product size: 195*158*15mm
- Product weight: 76g
- Accessories: USB charging cable
Instruction
1. Fixed the product directly under the original PS5 base, after removing the film
covering the triangular adhesive pad
2. Connect the USB charging cable to any USB slot of PS5 console. Plug the cable to
this LED stand then power on the PS5
3. The stand can be using in vertical or parallel console placement
LED Lights Mode
-First mode: POWER ON
7 colors will automatic change from red, green, blue, purple, blue, yellow, white
-Second mode: TWO COLOR RAINBOW
1st Button Press then gets two colors will collide from two LEDs slowly
-Third mode: SINGLE COLOR
2nd Button Press to select single color. Press button again to change the single color
-Forth mode: SINGLE COLOR WILL ROTATE COLORS AUTO
-Last press will turn off the lights
Notes
1. Input power must be stable and standard DC5V voltage
2. Do not disassemble it
3. If it is filled with water, do not use the product
4. Do not expose it in sunlight
5. Do not scrub it with chemical reagent
6. Do not scratch it with sharp objects
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels anko Support et étagère
Manuels Support et étagère populaires d'autres marques
Salamander
Salamander Acadia AC/W/L400/WH Manuel utilisateur
Fohhn
Fohhn VAT-09 Guide de l'utilisateur
ricoo
ricoo FS0522 Manuel utilisateur
AMSOIL
AMSOIL BMK-22 Guide rapide
Kargo Master
Kargo Master 48220 Manuel utilisateur
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur
