Angenieux IOP Manuel utilisateur

User manual

IOP

IOP user manual V1.0

THALES LAS FRANCE ANGÉNIEUX division. Photos and drawings are not contractually binding. The data is given for information.

THALES LAS FRANCE ANGÉNIEUX division reserves the right to change the performances of its products without notice.

This document is the full and sole property of THALES LAS FRANCE ANGÉNIEUX division. Any reproduction, rights of reproduction,

translation, modification, publication on material or digital medium in whole or in part of the document, is strictly forbidden.

Before using the products described in thismanual, be sure to read and understand all respective instructions. This instruction manual

applies to all Optimo Prime lenses and IOP tooling set. Pleasealso refer to Optimo Prime lenses user manual available on our website:

https://www.angenieux.com/service-and-support/#downloads

Miscellaneous

Congratulations on the purchase of Angénieux Optimo Prime lenses and IOP tooling set. After 50 years almost fully dedicated to high-end zoom

lens design and production, Angénieux chose the Cannes Film Festival to announce a complete set of high-end Full Frame Prime lenses –the

Optimo Prime series, in partnership with Band Pro Film & Digital, Inc and Jebsen Industrial Technology Co LTD.

The Optimo Prime series of 12 lenses provides full frame 46.3mm image circle coverage with a consistent 1.8 T-stop for most of the lenses. To

match with the legacy Optimo zooms, all Optimo Primes have identical colorimetry. Available with PL mount the Optimo Primes are the perfect

companion for your digital camera. They can also be configured with LPL mount as an option.

IMPORTANT: Please be aware that Optimo Prime lenses won’t fit on a camera with a reflex view finder.

All lenses support Cooke/i and are ARRI LDS2 ready; and offer a common gear size and position for all lenses in the 12-lens set.

The Optimo Prime series is composed of a total of 12 focal lengths with 18mm, 21mm, 24mm, 28mm, 32mm, 40mm, 50mm, 60mm, 75mm,

100mm, 135mm and 200mm.

Last but not least we allow you to go further than the standard Optimo Prime configuration to serve your creativity by using our unique Integrated

Optical Palette (IOP) technology. This includes three methods to achieve your own personalized look with iris blade unit for different bokeh

(including anamorphic effect), internal optical element and rear optical filter.

This user manual describes the different configurations and uses of your Optimo Prime IOP tooling set. If you need additional information don’t

hesitate to contact us at angenieuxserv[email protected]lesgroup.com. Additional product documentation is available on the Angénieux website at the

service and support page: https://www.angenieux.com/service-and-support/.

Foreword

Infinite possibilities with IOP (Integrated Optical Palette) technology

IOP internal filter (afocal area)

Diffusion, vintage look, flares…

IOP Rear filter

Diffusion, vintage look, …

IOP Iris sub assembly

Various blade options

IOP Tooling set

To access to all internal IOP elements

OPTIMO PRIME SERIES

In the below table you will find all the available references of IOP elements.

REFERENCE

INTERNAL OPTICAL PALETTE ELEMENTS FOR OPTIMO PRIMES

66067558AA

IOP TOOLING SET

66066980AA

3 Blades Iris D26 for F18, F21

66066978AA

3 Blades Iris D38 for F28, F40, F100, F135,F200

66066979AA

3 Blades Iris D38inv for F24,F32, F50, F60,F75

66067047AA

6 Blades Iris D26 for F18, F21

66067002AA

6 Blades Iris D38 for F28, F40, F100, F135,F200

66067035AA

6 Blades Iris D38inv for F24,F32, F50, F60,F75

66068663AA

Oval Iris D26 for for F18, F21

66068661AA

Oval Iris D38 F28, F40, F100, F135,F200

66068662AA

Oval Iris D38inv for F24,F32, F50, F60,F75

66068016AA

Clear Optic (different from standard internal glass 66068700AA mounted in the product)

66067549AA

Uncoated

66068076AA

Blue Streak optic

66068672AA

Net optic

66067529AC

RED IOP PINS WITH ‘3’ ENGRAVED

66067529AD

RED IOP PINS WITH ‘6’ ENGRAVED

66067529AB

RED IOP PINS WITH ‘0’ ENGRAVED

66067528AA

WHITE IOP PINS WITHOUT ENGRAVING

IOP ELEMENTS

0 - Safety information ............................................................................................................................................................................................7

1 - IOP tooling set - what’s in the box? ..................................................................................................................................................................9

2 - General lens IOP configuration.......................................................................................................................................................................10

3 - General IOP element swapping procedure.....................................................................................................................................................11

4 - Spare parts and optional accessories.............................................................................................................................................................13

5 –IOP element swap.........................................................................................................................................................................................15

STEP 1: REMOVE THE FRONT RING............................................................................................................................................................17

STEP 2: REMOVE THE FRONT ENGRAVED RING.......................................................................................................................................19

STEP 3: REMOVE THE FRONT GROUP........................................................................................................................................................19

STEP 4: REMOVE THE FOCUS GROUP - ONLY FOR F18, F21, F135 .........................................................................................................24

STEP 5: REMOVE INTERNAL GLASS ELEMENT OR IOP FILTER AND IRIS SUB-ASSEMBLY...................................................................25

6 –Reassembling................................................................................................................................................................................................28

STEP 1: IRIS SUB-ASSEMBLY.......................................................................................................................................................................29

STEP 2: IOP FILTER OR INTERNAL GLASS ELEMENT................................................................................................................................30

STEP 3: FOCUS GROUP - ONLY FOR F18, F21, F135..................................................................................................................................32

STEP 4: FRONT GROUP................................................................................................................................................................................34

STEP 5: FRONT ENGRAVED RING ...............................................................................................................................................................36

STEP 6: FRONT RING....................................................................................................................................................................................37

STEP 7: FINAL CHECK...................................................................................................................................................................................39

Contents

CAUTION

Always follow these guidelines to ensure against injury to yourself or others and damage to the system or other objects.

This safety information comes in addition to the product specific operating instructions in general and must be strictly observed

for safety reasons.

Read and understand all safety and operating instructions before you operate or install the lens.

Do not use accessories or attachments that are not recommended by Angénieux, as they may cause hazards and invalidate

the warranty.

Do not attempt to repair any part of the system! Repairs must only be carried out by authorized Angénieux Service Centers.

Do always use a clean area to open any Optimo Prime lenses to prevent from dust pollution.

Do always perform IOP elements swapping using only the IOP spanners.

WARNINGS

Handle any lens with care.

Do not expose lens to water or moisture.

Do not subject the lens to shocks.

Never insert objects of any kind into any part of the lens if these are not clearly qualified for the task in the manual.

Do not remove screws locked by varnish.

Changing camera lenses should be done in a dry and dust-free environment. If this is not possible, take extra care that no dust

enters the camera while the lens is off.

Keep the protective caps on the lens when not set on camera or not in operation.

Follow the cleaning instructions in this manual to avoid damage of the lens.

Do not look at high intensity light directly through any lens.

0 - Safety information

STORAGE CONDITIONS

Store any lens in a dry place where the temperature does not exceed –40°C and +70°C (- 40°F and + 158°F).

Do not store the lens in places where it may be subject to extreme temperatures, direct sunlight, high humidity, severe vibration,

or strong magnetic fields.

Condensation: When moving the lens from a cold to a warm location or when the lens is used in a damp environment,

condensation may appear on glass surfaces and on internal or external electrical connections. Operating the lenses while

condensation is present may result in damage to the equipment. Condensation on the optical components may have a visible

effect on the output images. To prevent condensation, store the lens in a dry area. If the lens is in a humid area, dry it and

store it a plastic bag with desiccant before using it. After moving the lens from cold to warm and humid environment, wait for

some time for the lens to warm up to the ambient temperature to avoid condensation.

TEMPERATURE OF OPERATION

Any lens is designed to be used between - 20°C and + 45°C (- 4°F and + 113°F).

The opto-mechanical design is passively athermalized. It allows Optimo Primes to prevent from a back focus shift with

temperature changes.

RECYCLING AND ENVIRONMENT

Optimo Prime series and IOP tooling set are free of chemical substances covered by European Regulation REACH in excess

of the thresholds set out. Follow the guidance sets up by your local authority for recycling the Optimo Prime lenses or the IOP

tooling set.

0 - Safety information

1 - IOP tooling set - what’s in the box?

In case you require any assistance or noticed a missing or broken item please

contact our service team at: angenieux[email protected]sgroup.com

5 spanners, 2 optical element holders, extra screws

and extra pins all within a dedicated transport case

5 spanners, 2 optical element holders, extra screws

and extra pins all within a dedicated transport case

2 - General lens IOP configuration

Focal length

18 mm

21 mm

24 mm

28 mm

32 mm

40 mm

50 mm

60 mm

75 mm

100 mm

135 mm

200 mm

Front ring

4 screws

8 screws

SPANNER

66067078AA

SPANNER

66067078AA

SPANNER

66067078AA

SPANNER

66067078AA

SPANNER

66067078AA

SPANNER

66067078AA

SPANNER

66067078AA

Front engraved ring

4 screws

4 screws (1)

6 screws (1)

4 screws

Front group

(Holder 66067062AA)

8 screws

and

SPANNER

66067102AA

8 screws

and

SPANNER

66067102AA

6 screws

and

SPANNER

66067102AA

6 screws

and

SPANNER

66067102AA

6 screws

and

SPANNER

66067102AA

6 screws

and

SPANNER

66067102AA

6 screws

and

SPANNER

66067102AA

6 screws

and

SPANNER

66067102AA

8 screws

Focus group

(Holder 66067075AA)

Spanner

66067115AA

Spanner

66067115AA

Spanner

66067115AA

Internal glass barrel

retainer

External part

of spanner

66067121AA

External part

of Spanner

66067121AA

External part

of spanner

66067121AA

External part

of spanner

66067121AA

External part

of spanner

66067121AA

External part

of spanner

66067121AA

External part

of spanner

66067121AA

External part

of spanner

66067121AA

External part

of spanner

66067121AA

External part

of spanner

66067121AA

External part

of spanner

66067121AA

External part

of spanner

66067121AA

Internal glass barrel

Internal part

of spanner

66067121AA

Internal part

of spanner

66067121AA

Internal part

of spanner

66067121AA

Internal part

of spanner

66067121AA

Internal part

of spanner

66067121AA

Internal part

of spanner

66067121AA

Internal part

of spanner

66067121AA

Internal part

of spanner

66067121AA

Internal part

of spanner

66067121AA

Internal part

of spanner

66067121AA

Internal part

of spanner

66067121AA

Internal part

of spanner

66067121AA

Internal diaphragm

Large side of

spanner

66066961AA

Large side of

spanner

66066961AA

Large side of

spanner

66066961AA

Internal glass element

Small side of

spanner

66066961AA

Small side of

spanner

66066961AA

Small side of

spanner

66066961AA

Small side of

spanner

66066961AA

Small side of

spanner

66066961AA

Small side of

spanner

66066961AA

Small side of

spanner

66066961AA

Small side of

spanner

66066961AA

Small side of

spanner

66066961AA

Small side of

spanner

66066961AA

Small side of

spanner

66066961AA

Small side of

spanner

66066961AA

Iris sub-assembly

Internal part

of spanner

66067121AA

Internal part

of spanner

66067121AA

Internal part

of spanner

66067121AA

Internal part

of spanner

66067121AA

Internal part

of spanner

66067121AA

Internal part

of spanner

66067121AA

Internal part

of spanner

66067121AA

Internal part

of spanner

66067121AA

Internal part

of spanner

66067121AA

Internal part

of spanner

66067121AA

Internal part

of spanner

66067121AA

Internal part

of spanner

66067121AA

(1) : NOT MANDATORY TO REMOVE BUT EASE THE FRONT GROUP SCREWS ACCESSIBILITY AND FRONT GROUP REMOVING

Table des matières

Autres manuels Angenieux Accessoires pour appareils photo

Angenieux

Angenieux OPTIMO STYLE 25-250 Manuel utilisateur

Manuels Accessoires pour appareils photo populaires d'autres marques

Viltrox

Viltrox EF-NEX Instructions d'installation

Calumet

Calumet 7100 Series CK7114 Manuel utilisateur

Ropox

Ropox 4Single Series Manuel utilisateur

Cambo

Cambo Wide DS Digital Series Mode d'emploi

Samsung

Samsung SHG-120 Manuel utilisateur

Ryobi

Ryobi BPL-1820 Manuel d'utilisation

Aegis

Aegis ABL-36020P Manuel utilisateur

Pentax

Pentax Data Back Fc Manuel utilisateur

Fantasea

Fantasea EyeGrabber F Series Manuel utilisateur

Honeywell

Honeywell HDZ20HD Manuel utilisateur

EGO

EGO BA1400T Manuel utilisateur

Sima

Sima SRW-62 Manuel utilisateur

Shape

Shape A7SSMKIT Manuel utilisateur

Slide Kamera

Slide Kamera HST-2 Manuel utilisateur

Power works

Power works 2902613 Manuel utilisateur

SES

SES SE-2047-2 Manuel utilisateur

Olympus

Olympus PT-EP05L Manuel utilisateur

Starlite

Starlite OctoDome nxt Manuel utilisateur