Angekis Saber 4K+ Manuel utilisateur
User Manual V1.0 EN
Please refer this document before using
Saber 4K+
4K60
Saber 4K+
—
1
—
CONTENT.....................................................................................................................1
SAFETY GUIDES.......................................................................................................... 2
PACKIN LIST................................................................................................................ 3
PRODUCT HIGHLIGHTS........................................................................................... 5
TECHNICAL SPEC....................................................................................................... 6
INTERFACE DESCRIPTION....................................................................................... 8
CAMERA DIMENSION.............................................................................................. 8
IR REMOTE CONTROLLER....................................................................................... 9
VISCA IN(RS232 PORT)..........................................................................................11
VISCA PROTOCOL................................................................................................... 13
PELCO-D PROTOCOL............................................................................................. 25
PELCO-P PROTOCOL..............................................................................................26
OSD MENU................................................................................................................28
UVC CONTROL.........................................................................................................32
WEB SETTING........................................................................................................... 33
VIEW RTSP VIDEO VIA VLC...................................................................................40
VISCA OVER IP......................................................................................................... 41
Saber 4K+
—
2
—
SAFETY GUIDES
● Before operation, please fully read and follow all instructions in the manual. For your safety,
always keep this manual with the camera.
● The camera power voltage is 12V DC, rated currency is 2A. We suggest you use it with the
original power supply adapter supplied by the factory.
● Please keep the power cable, video cable and control cable in a safe place. Protect all cables
especially the connectors.
● Operational environment: -10℃~50℃, humidity less than 80%.
● To avoid any danger, please keep the camera away from the corrosive liquid.
● Avoid stress, vibration and damp during transportation, storage and installation.
● Do not remove the camera housing and cover. For any service, please contact authorized
technicians.
● Video cable and control cable should be individually shielded, and cannot be substituted
with other cables. Do not direct the camera lens towards strong light, such as the sun or the
intensive light.
● Use a dry and soft cloth to clean the camera housing. Applied with neutral cleaning agent
when there is need to clean. To avoid damage on the camera lens, never use strong or abrasive
cleaning agents on the camera housing.
● Do not move the camera by holding the camera head. To avoid mechanical trouble, do not
rotate the camera head by hand.
● Put the camera on fixed and smooth desk or platform, avoid leaned installation.
● Power Supply Polarity:
Note：
The video quality may be affected by the specific frequencies of electromagnetic field.
Never grasp the head of the camera, and never move the camera by hand when it is working, otherwise,
mechanism maybe destroyed.
Saber 4K+
—
3
—
PACKING LIST
Check all below items when open the package
Camera ··············································· 1PCS
Power Adapter····································· 1PCS
Power Cable········································· 1PCS
Remote Controller································ 1PCS
USB Type-C Cable·································1PCS
RS232 Cable········································· 1PCS
User Manual·········································1PCS
QUICK START
LAN interface
Saber 4K+
—
4
—
Dial Switch Setting (at the bottom of the camera)
Dial Switch (ARM)
SW-1 SW-2 Instruction
1 OFF OFF Upgrading mode
2 ON OFF Debu
gg
in
g
mode
3 OFF ON Undefined
4 ON ON Working mode
Dial Switch
SW-3 SW-4 Instruction
1 OFF OFF Reserved
2 ON OFF Reserved
3 OFF ON Reserved
4 ON ON Reserved
Dial Switch
SW-5 SW-6 Instruction
1 OFF OFF Undefined
2 ON OFF Working mode
3 OFF ON Undefined
4 ON ON Undefined
Saber 4K+
—
5
—
PRODUCT HIGHLIGHT
★ Adopting the most advanced image processing DSP, 1/2.8 inch 8.42MP
sensor.
★ 4K wide angle optical lens: 12x optical zoom, with 80.5 degree field of view.
★ IP Ultra HD 4K60 video output, while supporting H.264, H.265 encoding.
★ Support POE+: one single Ethernet cable to get video, control, and power
supply.
★ Fast video format switch.
★ Special Focusing Algorithm: fast and precise focusing performance when
zooming or moving.
★ Unique camera design with patent.
★ Smooth PTZ mechanical design, accurate pan tilt motor control.
★ Support field upgrade, one-click software upgrade through WebUI.
★ RJ45, HDMI, SDI, USB Type-C outputs, fit for different scenarios.
★ Support Line in Audio input.
★ Support HDMI, SDI high-quality audio output.
★ Standard VISCA, PELCO-D, PELCO-D control protocol, quickly set up
through OSD menu.
★ Supplied with multi-functional IR remote controller, can set IP address via
OSD menu.
★ Standard Sony VISCA over IP protocol, support network video and control
transmission simultaneously.
★ Support SRT protocol for secure transmission of high-quality, low-latency
video over WANs.
★ Support RTMP protocol directly streaming to Youtube Live, Facebook Live
and other platform.
★ Multi language menu: support Chinese, English and Russian.
TECHNICAL SPEC Saber 4K+
—
6
—
ANG2-12UHD-01
Sensor 1/2.8inch high quality、8.42 MP CMOS Sensor
Video Format
HDMI
3840*2160P60/59.94/50/30/29.97/25
1920*1080P60/59.94/50/30/29.97/25/24/23.98
1920*1080I60/59.94/50
1280*720P60/59.94/50/30/29.97/25
SDI
1920*1080P60/59.94/50/30/29.97/25/24/23.98
1920*1080I60/59.94/50
1280*720P60/59.94/50/30/29.97/25
USB Type-C
MJPG, H.264/H265: 3840*2160P30; 1920*1080P60/30;
1280*720P60/30; 1024*576P60/30; 800*448P60/30
NV12: 1920*1080P10; 1280*720P25; 1024*576P30; 800*448P30
IP
Video Interface HDMI, SDI, RJ45, USB Type-C
Audio Interface 3.5mm Line in
Zoom 12X optical zoom + 4X digital zoom
Focal Length 3.4mm~40.3mm
Aperture F1.8(Wide)~F3.6(Tele)
View Angel 7.6°(Tele)~80.5°((Wide)
Rotation Angle Pan: ±170°; Tilt: -30°~+90°;
Rotation Speed Pan: 0.1°~120°/s; Tilt: 0.1°~80°/s
Preset Remote controller: 10; RS232: 128; Accuracy: 0.1°
Control Port RS232 IN, RJ45
Network Speed 1000M
Video encode H.264 / H.265
Bit Rate Control Variable Bit Rate, Constant Bit Rate
Video Bit Rate 1024~61440kbps
Main：3840*2160P15-60；1920*1080P15-60；
1280*720P15-60；1024*576P15-60
Sub：720*480P15-60；640*480P15-60；640*360P15-60
YUYV: 1920*1080P5; 1280*720P15; 1024*576P25;
800*448P30
TECHNICAL SPEC Saber 4K+
—
7
—
Protocol HTTP, RTSP, RTMP, Onvif, Visca TCP, Visca UDP, Visca over IP,
Visca Serial, Pelco-P, Pelco-D
POE+ Supported
Daisy Chain Support RS232 serial daisy chain
Minimum Lux 0.1lux
White Balance Auto / Manual / ATW / Push / Indoor / Outdoor / Color
Temperature
Exposure Auto / Manual /Shutter / Iris / Bright
Focus Auto / Manual
Iris Auto / Manual
Shutter Auto / Manual
Gamma select Supported
BLC Supported
2D Noise
Reduction
Supported
3D Noise
Reduction Supported
Anti-flicker OFF, 50Hz, 60Hz
Pan Tilt Flip Supported
Mirroring Supported
Input Voltage DC12V/POE+(IEEE802.3at)
Dimension 220mm×190mm×173mm
Net Weight 1.47kg(3.2LBS)
Working
Temperature -10℃~50℃
Working
Humidity ≤80%
Saber 4K+
—
8
—
CAMERA INTERFACE
CAMERA DIMENSION（MM）
1.Camera Lens 6.Tripod Screw Hole 11.USB Type-C port
2.Camera Base 7.Installation Hole 12.HDMI port
3.IR Receiver Panel 8.RS232 ((IN) port 13.3G-SDI port
4.Power Indicator Light 9.RS232 (OUT) port 14.RJ45 port
5.Dial Switch 10.Line in port 15.DC 12V plug
Saber 4K+
—
9
—
IR REMOTE CONTROLLER
Power Key
Under Normal working mode ，short press Power
key to let the camera enter standby mode ；Press it
again ，the camera will do self-configuration and
then go back to HOME position；It will go to preset
position if the power on mode has been set.
Address/Camera Setting Key
Set+（Cam1-Cam4）：set camera’s remote
Control address.
Short press Cam1 - Cam4 to select the camera.
Number Key
Set Presets: Set+(0-9) number key to recall presets
Clear Key
Clear +(0-9): to clear the relative preset;
Long press to clear all presets.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Angekis Appareil photo numérique
