AneX AG-114 Manuel utilisateur

1、Instruction

Thank you for buying ANEX hand blender products,the instruction manual will help you to

acquaint the valuable information for proper usage,care & maintenance of this product.

2、Important

1.Read the manual carefully before using the machine and save it for further reference.

01. This appliances not intended for use by children, close supervision is a must when any

appliance is used or near children.

02. Check if the Voltage indicated on the appliance corresponds to the local mains voltage before

you contact the appliance. Rated voltage is 220/230V~ ,rated frequency is 50Hz, Rated Power

300W.

03. Do not immerse the main body into water or other liquid to avoiding electric leakage .

04. If the main cord is damage, you must have it replaced by ANEX, a service center authorized

by ANEX or similarly qualified persons in order avoid a hazard. If the appliance is damaged,

always have it replaced with one of the original type, otherwise our guarantee is no longer valid.

05. Make sure all the parts are installed correctly and tighten before connect to the power .

06. Before change any parts or cleaning , please cut off the power and wait for the motor stop

revolving then unplug the plug.

07. Each working time can not be more than 30 seconds . It must be stop working when the motor

casing too hot after work for long without a rest , you need to stop 20-30 minutes to cool down the

motor .

08. Do not put the hot (the MAX temperature:60 degree) and overload ingredients into the cup for

processing to avoid liquid over-brim or body injury .

09.The blades are SHARP, handle with care in use, assembly and while cleaning to to avoid bodily

injury. If the blade is get stuck, unplug the appliance before you remove the ingredients that block

the blade.

10.Please use the accessories which advised.

11.This appliance is not intended for use by persons(including children) with reduce physical

sensory or mental capabilities or lack of experience or instruction concerning use of the appliance

by persons responsible for their safety.

12.The machine is for household use only ,it not suitable for use in outdoor.

13.Children should be supervised to ensure that they won’t play with the appliance.

3. Products feature and advantage

01. DC motor with low noise and high efficiency

02. Multifunction :blending ,chopping ,egg beating function

03. Elegant appearance with soft capsule handles

04. Stainless steel stirring rod, egg beater with high quality , easy for cleaning

05. With Anti-interference control panel inside ,fast and slow speed operating in smoothly

06. With planet gear speed reducer , durable for use .

07. Two speed for selection ,easy for operating.

08. Detachable parts ,easy for install with different parts

4.Parts

A．Speed selector B. Motor unit C. Stainless steel stirring rod

D. Oval beaker E. Blade unit F. bowl

G. Egg beater upper part H. Egg beater I. Blender Cup

5. Specification

Products name Hand blender Model No:- AG-114/AG-115/AG-116

Rated Voltage 220/230V~ Rated Frequency:- 50HZ

Rated Power 300W Rated Working time:- 1 minute

Capacity 700ml

6.How to use

Noted : Clean all the parts of machine which will touch the food before using .

Blending and mixing

Stirring rod use for blending various food , include drinking , flavoring etc ;

01. Please tighten the Stirring rod to the main body(Pic1)

02. Put the food into the blending cup (cut the ingredients piece less than 15mm )(Pic2)

03. Add drinking water ,the water level should be within the Max limit 700ML, the highest

temperature of water is 60 degree .

04. Insert the plug to the power socket

05. Put the stirring stick into the middle of preparing food

06. Press onto the power switch ,the blender will continue working .For achieve a good

effect ,please move the stirring rob up and down during processing .When you need to turn off the

machine, just move the finger away the power switch ,the motor will stop revolving immediately.

(use slowly speed switch )(Pic3)

07. Each working time should be less than 30 seconds

08.Move the finger away from the power switch when finish processing

09.Cut off the power(Pic4)

Blending

01. Please tighten the egg beater parts onto the main body(Pic5)

02. Insert the plug to the power socket.

03. Put the egg beater into the middle of preparing food.

04. Press the power switch ,the blender will continue working. For achieve a good effect ,please

move the stirring rob up and down during processing .When you need to turn off the machine, just

move the finger away the power switch ,the motor will stop revolving immediately. (Use slowly

speed switch )(Pic6)

05. Each working time should be less than 3minutes.

06. Move the finger away from the power switch when finish processing

07. Cut off the power

Chopping

01. Put the chopper cup onto the flat place , cut the food into small pieces and add into the chopper

cup (remove the bones ,muscle and fat meat before processing)(Pic7)

Noted : Do not adding the food more than MAX level to avoiding affect the processing effect ,and

protect the machine working lifetime.

02. Put the chopper cup cover onto the chopper cup and make it tighten .

03. Please tighten the chopper cup cover to the main body.(Pic8)

04. Press the power switch ,the machine will continue working .(use quickly speed first and later

use slowly speed )

05. Each working time should be less than 30 seconds

Noted : because rated power of the motor is high ,please grip the handle during processing .

06. Move the finger away from the power switch when finish processing

07. Cut off the power

08. After the blades stop revolving , Please take down the main body first and then take down the

chopper head .

09. Take out the blades from the processing food carefully to avoid bodily injury .(Pic9)

10. Take out the finished food from the chopper cup

Noted : Do not operate the chopper with an empty cup.

7.Cleaning and Maintenance

Main body and Stirring rod

01. Cleaning the main body and stirring rob completely after using the machine every time.

02. Loosen main body and stirring rod and separate of them

03. Wipe the main body with sponge or wet cloth .Don’t use any powder cleaning agent for

cleaning to avoid damage main body .(Do not immerse the main body into water or any other

liquid )(Pic10)

04. The bottom of stirring rod can be immerse to the warm water and add cleaning agent and

clean it by hands (the blades is SHARP ,be careful !)(Pic11)

Chopper and Accessories

01.To avoid the sticking foods become dry and with bad smells ,please clean the chopper

cup ,choper cup cover and blades immediately after finish processing .

02.Seperate the chopper cup cover with the cup ,and take out of blades with care ;

03.Cleaning the chopper cup and blades with cleaning agent, then rinse it with cleaning water and

make it dried .(To avoiding bodily injury ,please don’t keep the blades inside the cleaning water

during cleaning the machine)(Pic12)

04. Wipe the chopper head with foam or wet cloth to remove the food stick on it .

(do not put the chopper head immerse into water of any liquid )(Pic13)

Egg beater Accessories

01. Separate the egg beater head with the egg beater

02. Wipe the egg beater head with sponge or wet cloth (Do not immerse egg beater head into the

water or any other liquid )(Pic14)

03. Use warm water with cleaning agent for clean egg beater ,or put it into the cleaning machine

for clean.(Pic15)

Noted : all the accessories should be stored in dry place and keep away from sun. Please make

sure all the accessories are cleaned and dry before storage.

9. FAQ& Trouble shooting sheet

Problem Possible causes

The motor working as normal, but the blades do not work Check the main body if tighten with

the parts

Check the blades if stuck by any foods

Solutions

Tighten the main body with parts

Separate the blades with the blades cover , put them into the warm water for immersing 30

minutes and then tighten this two parts and connect the power supply, turn on the power switch

and let it revolving 20-30 seconds in the water.

The motor shut down during processing The motor use for a long time or the motor broken

in a high temperature.

The control panel fuse was broken by a suddenly

high electric current.

Solutions

Each working time should be less than 1 minute

Do not use the machine in a high-voltage

Return the appliance to the authorized center for repair or adjustment

The main body with anomaly shake or have a big noise check the main body if tighten

enough with parts .

Check the foods if it is overload .

Solutions

Tighten the main body with parts

Turn off the switch and cut off the power ,and take out of the overload foods.

The blades or motor device are stuck Check the blades if stuck by foods

Solutions

Turn off the switch and cut off the power, and take out of the foods , cut it into small pieces

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels AneX Mixer

AneX

AneX AG-3045 Manuel utilisateur

Manuels Mixer populaires d'autres marques

ROTOR

ROTOR 1125.201 Manuel utilisateur

Braun

Braun Multiquick 5 Vario series Manuel utilisateur

ARENDO

ARENDO MIRA 305424 Manuel utilisateur

CHEF-BUILT

CHEF-BUILT CCB-3500 Manuel utilisateur

Viconte

Viconte VC-4406 Manuel utilisateur

Oster

Oster BLSTAB-CB0 Manuel utilisateur

HOFFEN

HOFFEN MC-3005 Manuel utilisateur

Black & Decker

Black & Decker BLC18750DM Manuel utilisateur

Sunbeam

Sunbeam 4182 Manuel utilisateur

Bialetti

Bialetti FMX35 Manuel utilisateur

Black & Decker

Black & Decker BL8000 Manuel utilisateur

Duronic

Duronic BL530 Manuel utilisateur

Exquisit

Exquisit MS 3002 wes Manuel utilisateur

Lumme

Lumme LU-KP1891A Manuel utilisateur

Binatone

Binatone HB-735 Manuel utilisateur

Moulinex

Moulinex LM936E10 Manuel utilisateur

Oster

Oster VERSA Manuel d'installation et d'exploitation

Ninja

Ninja NN210Q Manuel utilisateur