Andersson WSR 2.0 Manuel utilisateur
WSR 2.0 | Wireless router
User manual
English | Svenska | Norsk
Copyright
This manual is the copyright of CI no 556520-4137. No part of this manual may
be revised, copied or transmitted in any way without written permission from CI
no 556520-4137.
Statement
This manual does not provide any warranty or related declarations. All information
in this manual including the product specification, pictures and literatures is just
for reference, CI no 556520-4137 reserves the rights to update contents of this
manual without further notice.
Copyright
Org.nr 556520-4137 äger upphovsrätten till den här handboken. Inga delar av
handboken får ändras, kopieras eller överföras utan skriftligt tillstånd från org.
nr 556520-4137.
Meddelande
Den här handboken innehåller inga garantier eller andra typer av utfästelser. All
information i handboken, inklusive tekniska data, bilder och texter, är endast ex-
empel och används i referenssyfte. Org.nr 556520-4137 förbehåller sig rätten att
upp-datera innehållet i handboken utan föregående meddelande.
Opphavsrett
Org.nr 556520-4137 har opphavsretten til denne håndboken. Ingen deler av denne
håndboken skal revideres, kopieres eller overføres på noen måte uten skriftlig sam-
tykke fra org.nr 556520-4137.
Erklæring
Denne håndboken gir ingen garanti eller tilhørende forsikringer. All informasjon
i denne håndboken, inklusiv produktspesifikasjon, bilder og tekst, er bare ment
som referanse. Org.nr 556520-4137 forbeholder seg retten til å oppdatere innhol-
det i denne håndboken uten forvarsel.
English
Introduction 4
Getting Started 5
Adding Computers to the Wireless Router 6
Configuring via Web Browser 7
Setup Wizard 8-9
Setup the Router mode 10
LAN Settings 11
Wireless Base Configuration 12
Wireless Security Configuration 13-14
Router Administrator Setup 15-17
Svenska
Inledning 18
Kom igång 19
Lägg till datorer till routern 20
Konfigurera via webbläsare 21
Installationsguiden 22-23
Ställ in Router-läge 24
LAN-inställningar 25
Grundinställningar för trådlöst 26
Konfiguration av Trådlös säkerhet 27-28
Administrationsinställningar 29-31
Norsk
Innledning 32
Komme i gang 33
Koble en datamaskin til ruteren 34
Konfigurasjon via webleser 35
Konfigurasjonsveiviser 36-37
Konfigurere rutermodusen 38
LAN-innstillinger 39
Grundinställningar för trådlöst 40
Sikkerhetskonfigurasjon for trådløs 41-42
Administratorkonfigurasjon for ruter 43-45
Content / Innehållsförteckning / Register
English
4
Introduction
The WSR 2.0 Wireless Router is a combined wired/wireless network
connection device designed specifically for small business, office,
and home office networking requirements. It complies with the
IEEE 802.11n (Draft 2.0) standard. It adopts MIMO as well as SST
technologies. It also works well with other 11b/g and 11n protocol
wireless products. Create instant WiFi hotspots at any location where
you have Internet connection.
Package Contents
1 x Wireless Router
1 x Quick installation Guide
1 x Power adapter
1 x RJ-45 Networking Cable
English
5
Getting Started
Setting up a Wireless Infrastructure Network
Cable / DSL Modem
Wireless Router Desktop PC or Laptop
(Wireless Adapter Required)
For a typical wireless setup at home (as shown above),
Please do the following:
1. You will need broadband Internet access (a ADSL, Cable
Modem line into your home or office).
2. Consult with your ADSL or Cable Modem provider for proper
installation of the modem.
3. Connect the ADSL or Cable modem to the Wireless Router.
Plug in the Power Adapter to the Wireless Router.
4. Adding computers to the Wireless Router.
IMPORTANT NOTE
You can reset your Wireless Router to default setting by press the
‘RESET’ button on the back side of the Router.
You can use this solution if you forget your password.
English
6
Adding Computers to the Wireless Router
1. Log on to the computer.
2. Open Connect to a Network by right-clicking the network icon
( or ) in the notification area.
3. Choose the wireless network from the list that appears, and
then click Connect.
4. Type the network security key or passphrase if you are asked to
do so, and then click OK.
You’ll see a confirmation message when you are connected to
the network.
5. To confirm that you added the computer, do the following:
Open Network by clicking the Start button , and then clicking
Control Panel. In the search box, type network, and then, under
Network and Sharing Center, click View network computers and
devices.
You should see icons for the computer you added and for the other
computers and devices that are part of the network.
Note : If you don’t see icons in the Network folder, then network
discovery and file sharing might be turned off.
For more information:
http://windows.microsoft.com/en-US/windows7/Add-a-device-or-computer-
to-a-network
http://windows.microsoft.com/en-US/windows7/Setting-up-a-Wirelessetwork
http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-
Wirelessetwork
English
7
Configuring via Web Browser
Open web browser and type http://192.168.0.1 in the browser’s
address box. This number is the default IP address for this device.
The login screen below will appear. Enter the “User Name” and
“Password” and click “OK” to login.
The default User name is “admin” and the Password is “admin”,
English
8
Setup Wizard
After successfully login, the following Router Summary will be
displayed on your web browser:
The setup wizard will guide you to configure access point for first time.
English
9
1. WAN Connect Setting
If your ISP provides the DHCP service, please choose ‘dynamic
IP’, and the Router will automatically get IP parameters from
your ISP.
If your ISP provides a static or fixed IP Address, Subnet
Mask, Gateway and DNS setting, select ‘static IP’. Enter
the IP address / Subnet Mask / Default Gateway / Primary /
Secondary DNS in dotted-decimalnotation provided by your
ISP.
If your ISP provides a username and a password for Dial-up.
Please choose “PPPoE”, Enter the Username and Password.
2. Wireless SSID Setting
3. Wireless Security Setting
English
10
Setup the Router mode
To Setup the router mode, please follow the following instructions:
Please click “Mode” located at the web management interface, the
following message will be displayed on your web browser:
Gateway
In this mode, the device is supposed to connect to internet via ADSL/
Cable Modem. The NAT is enabled and PCs in LAN ports share the
same IP to ISP through WAN port.
Bridge
In this mode, all ethernet ports and wireless interface are bridged
together and NAT function is disabled. All the WAN related function and
firewall are not supported.
Wireless ISP
In this mode, all ethernet ports are bridged together and the wireless
client will connect to ISP access point. The NAT is enabled and PCs in
ethernet ports share the same IP to ISP through wireless LAN. You can
connect to the ISP AP in Site-Survey page.
Click the Apply button to Change your Router Mode.
Table des matières
Langues :
