AND PLUS CONNECT UC-350BLE Manuel utilisateur

Instruction Manual

Safety Information E-2

Overview E-3

Initial Startup E-4

Connecting to Mobile Device

(Pairing) E-5

Start Measuring E-7

Ofine Measurement E-9

Select Measurement Unit E-9

Manage Your Health E-10

Troubleshooting E-11

Specications E-12

Maintenance E-14

Warranty E-15

PLUSCONNECT

Wireless Weight Scale

UC-350BLE

Thank you very much for selecting the A&D Medical PLUSCONNECT Wireless

Weight Scale UC-350BLE. Please do read the user manual carefully and

thoroughly so as to ensure the safe usage of this product, and keep the manual

well for further reference in case you have problems.

E-2

Safety Information

Your Scale and Its Environment

To ensure your safety as well as the service life of your scale, please avoid

using the scale under the following circumstances:

• Slippery oor such as tile oor

• Jumping onto the platform immediately after bath or with wet hands

• Near a cell phone or microwave oven

Avoid storage in the following locations:

• Where there is water

• Where the device may be exposed to extreme temperatures, humidity, moisture,

direct sunlight, dust, or salt air

• Where there is risk of shock or drop

• Where you store chemicals or full of corrosive gases

• Where in reach of the infants or children

Efcient Use of Your Scale

To ensure the accuracy of measurement, please follow below instructions

when you start measurement.

• Place the scale on a at, hard surface. Soft surface such as carpet will affect the

performance of the scale.

• Avoid measurement immediately after strenuous exercise, sauna or bath,

drinking, and dinning.

• Always start measurement in the same time slot and on the same scale located

on the same at, hard surface.

E-3

Overview

Device Components

Includes:

• Weight Scale UC-350BLE

• 4 x AAA Batteries (1.5V each)

• User Manual

• Quick Start Card

LCD Display

LCD display

DOWN Button

SET Button

UP Button

UNIT and Pair-up

Activation Button Sensor

Battery Compartment

Pound

Kilogram

Successful Bluetooth Connection

Data transmitting/pending to transmit

to wireless wellness system

Low Battery

E-4

Initial Startup

Insert the Batteries

• Open the battery door in the back of the scale.

• Insert the batteries (4 x 1.5V AAA) into the battery

compartment according to the polarity indications

marked inside the compartment.

* The digits “ ” will be shown on the LCD.

• Close the battery door and wait until the digits “ ”

are shown on the LCD.

CAUTION

• When the symbol appears, the device will power off. Then you shall

replace with a new set of batteries. Please replace all four batteries at the

same time. Do NOT mix the old batteries with the new one.

• Worn batteries are hazardous waste. Do NOT dispose of them together with

the household garbage. Please refer to the local ordinances and recycling

instructions regarding disposal of the worn batteries and scrapped device.

• If you do not intend to use this unit for a prolonged period of time, it is

advisable to remove the batteries before storing.

E-5

Connecting to Mobile Device (Pairing)

Download the “A&D Connect” app

Download the free “A&D Connect” app from the App Store or Google play.

With the advanced Bluetooth®4.0 technology applied, the mobile or portable

equipments, which are equipped with Bluetooth®function in line with BLE Technical

Specications established by global organization Bluetooth®SIG, are capable to

receive your personal health data.

Account Registration and Device Setup

Create your account following the app instruction or continue as a guest.

Guest Mode

is saved on device memory

but not in your account

Account Registration

Create an account with

username and password.

The app will save and

track data on your account

and calculate your BMI

UC-350BLE

weight scale

In the Device Setup screen, select UC-350BLE to get the app in pairing mode with

the scale.

E-6

Symbol and symbol

will be shown on the scale LCD

alternatively, indicating pair-up

is proceeding.

If SUCCEED, symbol will be

shown on the scale LCD.

If FAIL, symbol “E1” will be shown

on the LCD. (Please refer to

Troubleshooting for more details.)

Pair-Up

• Turn on Bluetooth®and the app. Make sure both are ON when pair-up is

proceeding.

• Press and hold “UNIT” button in the back of the scale to start pair-up.

UNIT button

On the app, select User ID among

P1 to P7.

NOTE: Remember your “P#”

to ensure data is stored under

correct User.

E-7

Start Measuring

Initializing Your Scale

1. Position the scale on a at, hard surface. Carpeted or

uneven oors may affect accuracy.

2. Press the platform centre and remove your foot.

3. “0.0” will be displayed.

4. The scale will switch off and is now ready for use. This

initialization process must be repeated if the scale is

moved. At all other times step straight on the scale.

Setting the User ID and Start Measuring

• Press “SET” button or when the LCD displays 0.0, press and hold “SET” button

for about 3s to select your “P#”.

• Once “P1” ashes, press the function button or  to select your “P#” among P1

to P8. Press “SET” button to lock it. Once the initial User ID is set up, a single user

doesn’t have to repeat this process each time because the scale will remember you.

• After setting your “P#”, step on the platform when the scale displays “0.0”. Stand

still and keep full contact with the scale until the unit (lb/kg) stop ashing, then

the weight is locked.

• When your scale is successfully paired with your smartphone and the Bluetooth

is ON, it will process data transmission automatically. (Please refer to Data

Transmission for more details.)

Beep Beep

Be sure to select your “P#” on the scale.

Guest User should select “P8”.

If you forget your “P#”, conrm in the app dashboard.

Your “P#” is displayed below the scale illustration.

E-8

Data Transmission

• Once the Weight Scale UC-350BLE is successfully

paired-up with your smartphone, please open the

“A&D Connect” app and turn on your Bluetooth.

Keep smartphone and scale in transmission distance.

Step on the scale and take a measurement. Once

the measurement is nished the data is automatically

transferred to the app.

• The symbol will disappear after

successful data transmission,

and you may check your personal

health data stored in your

smartphone.

• If the data is not transmitted to a

paired phone, the symbol will

remain. The pending measurement

data will be temporarily kept in

the scale and transmitted to your

smartphone when next connection

is complete.

Note: Whether the data transmission is successful, the device will shut down automatically 3 seconds later.

Multiuser

Up to 8 people can use and store reading on the weight scale (7 registered user

and 1 guest can share the scale).

• To add new users, select User ID that is not assigned already in the Device

Setup process on the app (pg. E-5 and E-6). If all 7 User IDs are occupied you

can overwrite one by simply selecting it.

• Be sure to select the correct “P#” on the app and the scale for each user.

Guest User should select “P8”.

• Once the correct User ID is selected, follow the steps for Start Measuring.

Data transmitting

Data ready to transmit to

the app:

• If SUCCEED, the symbol

disappears;

• If FAIL, the symbol remains.

E-9

Ofine Measurement

Even when you don’t have your phone, the weight data is stored in your ID memory

and transmitted next time the scale is connected with your phone (max 30 memory).

Be sure to select your “P#” on the scale. Guest User should select “P8”.

1. Step onto the scale platform and remain still while the scale computes your

weight. Keep full contact with the scale until the unit (lb/kg) stop ashing.

2. A beep sound will indicate to step off and the scale will display your weight value

3. The scale will automatically turn off after a few seconds.

Select Measurement Unit

Changing Measurement Unit

The default measurement unit is “lb”.

You may press “UNIT” button on the

back of the scale to choose among

kilogram and pound.

CAUTION

• Please put the scale on at hard ground when nishing the unit selection.

Wait for a few seconds, then you may start measuring. If there is not any

operation in weighing mode, the scale will turn off in a few seconds.

Beep Beep

Table des matières

Autres manuels AND Échelle

AND

AND SK-1000WP Manuel utilisateur

AND

AND HV-CWP Series Manuel utilisateur

AND

AND HVL-CS Manuel utilisateur

AND

AND GX-M Series Manuel utilisateur

AND

AND GX-L Series Manuel utilisateur

AND

AND PREMIUM UC-352CNBLE Manuel utilisateur

AND

AND EJ-120 Manuel utilisateur

AND

AND UC-502 Manuel utilisateur

AND

AND HT-300CL Manuel utilisateur

AND

AND PR-5 Manuel utilisateur

AND

AND HL-WP Series Manuel utilisateur

AND

AND UC-355PBT-Ci Manuel utilisateur

AND

AND EK-120G Manuel utilisateur

AND

AND BA-TE Series Manuel utilisateur

AND

AND HR Series Manuel utilisateur

AND

AND FZ-i Series Manuel utilisateur

AND

AND GR Series Manuel utilisateur

AND

AND UC-321 Manuel utilisateur

AND

AND PLUSCONNECT UC-350CNBLE Manuel utilisateur

AND

AND EK-ilEW-i Series Manuel utilisateur

AND

AND HV-CWP Series Manuel utilisateur

AND

AND UC-324NFC Manuel utilisateur

AND

AND SJ-3000WP/-BT Manuel utilisateur

AND

AND FG-CWP Series Manuel utilisateur

Manuels Échelle populaires d'autres marques

AWS

AWS ZEO-50 Manuel utilisateur

Gima

Gima Glass Body Fat Analyzer Manuel de la liste des pièces

Seca

Seca 374 Manuel utilisateur

TEC

TEC TEC SL59 SERIES Manuel utilisateur

Axis

Axis B/E Series Manuel utilisateur

Alecto

Alecto ACW-40 Manuel utilisateur

Rice Lake

Rice Lake MSI-4260 IS Manuel utilisateur

IKA

IKA RCT basic safety control Manuel utilisateur

ADE

ADE M20011 Manuel utilisateur

Duronic

Duronic KS3000 Manuel utilisateur

Digi

Digi SM-720 Manuel utilisateur

Cardinal

Cardinal CS Series Manuel utilisateur

Korona

Korona Kastella Manuel utilisateur

A&D

A&D FC-50Ki Manuel utilisateur

BDA

BDA CAMARGUE Manuel utilisateur

Tanita

Tanita HD-357 Manuel utilisateur

Leifheit

Leifheit 03173 Manuel utilisateur

Lumme

Lumme LU-1340 Manuel utilisateur