AND FG-CWP Series Manuel utilisateur

FG-CWP Series

Waterproof Digital Platform Scale

FG-30KCMWP

FG-60KCLWP

FG-150KCLWP

1WMPD4004367

This Manual and Marks

All safety messages are identified by the following, “WARNING” or “CAUTION”, of

ANSI Z535.4 (American National Standard Institute: Product Safety Signs and

Labels). The meanings are as follows:

This is a hazard alert mark.

No part of this publication may be reproduced, transmitted, transcribed, or translated into any

language in any form by any means without the written permission of A&D Company Ltd.

The contents of this manual and the specifications of the instrument covered by this manual

are subject to change for improvement without notice.

Windows, Word and Excel are registered trademarks of the Microsoft Corporation.

WARNING A potentially hazardous situation which, if not avoided, could

result in death or serious injury.

CAUTION A potentially hazardous situation which, if not avoided, may

result in minor or moderate injury.

Contents

1. Compliance ..........................................................................................................................................5

1.1. Compliance with FCC rules ...........................................................................................................5

1.2. Classification of Protection Provided by Enclosures .....................................................................5

2. Introduction..........................................................................................................................................6

3. Outline and Features...........................................................................................................................6

4. Cautions ...............................................................................................................................................7

4.1. Precautions for Installing the Scale ...............................................................................................7

4.2. Precautions for Weighing...............................................................................................................7

4.3. Precautions for Storing ..................................................................................................................7

5. Items Included .....................................................................................................................................8

6. Part Names...........................................................................................................................................8

6.1. Display and Symbols .....................................................................................................................9

6.2. Operation Keys ............................................................................................................................10

7. Setup................................................................................................................................................... 11

7.1. Attaching Pole to Base................................................................................................................. 11

7.2. Installation.................................................................................................................................... 11

8. Basic Operation .................................................................................................................................12

8.1. Turning Power On and Off ...........................................................................................................12

8.1.1. Mobile Battery ......................................................................................................................13

8.2. Basic Operation ...........................................................................................................................13

8.3. Readability ...................................................................................................................................14

9. Counting Function.............................................................................................................................14

10. Comparator Function........................................................................................................................15

10.1. How to Operate............................................................................................................................16

10.2. Selecting the Memory Number ....................................................................................................16

10.3. Confirming the HI/LO Value .........................................................................................................17

10.4. HI/LO value setting ......................................................................................................................18

11.Display Hold Function.......................................................................................................................19

12. Impact Shock Detection Function (ISD) ..........................................................................................19

13. Auto-Tare Function............................................................................................................................20

14. Sensitivity Adjustment......................................................................................................................21

14.1. Sensitivity adjustment Items ........................................................................................................21

14.2. Sensitivity adjustment Using a Weight.........................................................................................23

14.3. Correcting for Gravitational Acceleration .....................................................................................24

14.4. Restoring Sensitivity Adjustment Value to Factory Default..........................................................25

15. Function Table ...................................................................................................................................26

15.1. Parameter Setting Procedure ......................................................................................................26

15.2. func setting .................................................................................................................................26

15.2.1. Setting Example ...................................................................................................................27

15.3. id setting ...................................................................................................................................27

15.4. pa55wd setting .............................................................................................................................27

15.5. Restoring Function Tables to Factory Default..............................................................................28

15.6. Parameter List..............................................................................................................................29

16. Communication .................................................................................................................................33

16.1. USB interface...............................................................................................................................33

16.2. Data Format .................................................................................................................................35

17. Options ...............................................................................................................................................41

17.1. Option list .....................................................................................................................................41

18. ID Number and GMP, GLP.................................................................................................................42

18.1. ID Number Setting Procedure......................................................................................................42

18.2. GMP, GLP Report.......................................................................................................................43

19. Password Lock Function..................................................................................................................47

19.1. Setting Procedure ........................................................................................................................47

19.2. To change the function table after setting lock 1 or 2..............................................................48

19.2.1. To change the function table in admin .................................................................................48

19.2.2. To change the function table in gUe5t ................................................................................49

19.2.3. Parameter list that can be changed in gue5t......................................................................49

19.2.4. If you forget the password....................................................................................................50

20. Maintenance.......................................................................................................................................51

20.1. Repair...........................................................................................................................................51

20.2. Check Points Before Calling Maintenance Service .....................................................................51

20.3. Error code table ...........................................................................................................................52

21. Specifications ....................................................................................................................................53

21.1. Specifications list .........................................................................................................................53

21.2. Dimensions ..................................................................................................................................54

Gravity Acceleration Map ........................................................................................................................55

1. Compliance

1.1. Compliance with FCC rules

□Please note that this equipment generates, uses and can radiate radio frequency energy. It has

been tested and found to comply with the limits of a Class A computing device pursuant to

Subpart J of Part 15 of FCC rules. These rules are designed to provide reasonable protection

against interference when it is operated in a commercial environment. If it is operated in a

residential area, it might cause some interference and under these circumstances the user

would be required to take, at their own expense, whatever measures are necessary to eliminate

the interference.

(FCC = Federal Communications Commission in the U.S.A.)

1.2. Classification of Protection Provided by Enclosures

□This equipment complies with the IP Code IEC 60529.

The meaning of the IP67 code is as follows:

IP : International Protection.

6 :Protection against ingress of dustandairborne particles.

7 :Protection against water and liquids, up to and included submersion of up to one meter.

2. Introduction

Thank you for purchasing this A&D Water proof digital platform scale. This manual describes how

the FG-CWP Series Super Washdown Scales work and how to maximize their performance.

Please read this manual completely before using the scale.

3. Outline and Features

The FG-CWP series has the following features.

□The scale is made of all stainless steel and has waterproof/dustproof performance compliant

with IP67.

(Intrusion of water into the device is prevented even when submerged to a depth of 1 m for

30 minutes.)

□The FG-CWP series has four display resolutions: 1/3,000, 1/6,000 (1/7,500 with some models),

1/12,000 (1/15,000 with some models), and 1/30,000. Resolution can be switched as needed

for the usage. (Resolution = Readability / Weighing capacity)

□The FG-CWP series has two sizes of weighing pans: M size for FG-30KCMWP and L size for

FG-60KCLWP / FG-150KCLWP.

□The scales use a backlit liquid crystal display to enable viewing in dim light.

□The AC adapter or a mobile battery can be used to supply power.

□Weighing data can be transmitted to a PC using a USB cable, the FG-27CWP option (To

communicate using FG-27CWP, AD-8541-PC is required separately).

□9.Counting Function determines the number of objects based on the mass value (total weight)

when each item has the same mass value.

□10.Comparator Function compares the displayed value (measured value) with the previously

set comparator values and indicates the results on the large and bright LED display.

□Up to 10 comparator value settings can be stored in memory.

□11.Display hold function fixes display the weighed value in place to facilitate reading.

□12.Impact shock detection function (ISD) displays the shock level applied to the mass sensor

section.

□13.Auto-tare function, used with comparator mode, automatically tares and displays “OK” for a

certain amount of sample and repeats this process for the next weighing.

□The following parameters are stored in the scale even if the power is turned off.

Unit weight of counting function

HI/LO values of comparator function

Sensitivity adjustment data

Parameters of the function table

4. Cautions

4.1. Precautions for Installing the Scale

□Ground the scale, so that the user will not be subjected to an electric shock.

□To prevent electric shock, do not handle the USB cable with wet hands.

□The USB cable is not waterproof. Install the scale in an area where it will not get wet.

□Do not install the scale where flammable or corrosive gas is present.

□Do not put excessive force on cables.

□The scale is heavy. Use caution, as lifting may cause it to fall over.

Consider the following installation conditions to get the greatest performance

from your scale.

□Install the scale in an indoor location out of direct sunlight with stable temperature and

humidity that is free of drafts and vibrations, on a solid and level surface and with a stable

power supply.

□Do not install on a soft floor or where there is vibration.

□Do not install where there is wind or large fluctuations in temperature.

□Avoid locations in direct sunlight.

□Do not install in locations with strong magnetic fields or strong radio signals.

□Do not install where static electricity is likely to occur. When humidity is 45% R.H. or less,

plastic and insulating materials are apt to be charged with static electricity due to friction, etc.

□Unstable AC power supply may cause malfunctions.

□Remove the protective film from the weighing pan before use.

□Sensitivity adjustment should be performed for more accurate weighing when the scale is first

installed or when it is moved far. Refer to “14. Sensitivity adjustment” for details.

4.2. Precautions for Weighing

□Do not place loads on the weighing pan that exceed the weighing capacity.

□Periodic sensitivity adjustment is recommended in order to maintain accurate weighing.

(Refer to “14. Sensitivity Adjustment”)

□Do not apply shock to or drop anything on the weighing pan.

□Do not use a sharp instrument such as a pencil or pen to press keys or switches.

□Press the ZERO key before each weighing to reduce the chance of error.

□Do not weigh when the scale is immersed in water.

□Periodically confirm that weighed values are correct.

□The panel on the rear of the display unit should be kept closed during use to ensure it is

dustproof and water proof.

4.3. Precautions for Storing

□Do not disassemble the scale.

□If the scale becomes dirty, wipe it with a soft cloth slightly moistened with a mild detergent or

a rubbing alcohol (70% or less). Do not use organic solvents.

□Do not scrub with a brush or the like.

□Do not spray with strong jets of water.

DANGER

5. Items Included

The following items are packed.

●Main Unit ●Quick Start Guide

FG-30KCMWP FG-60KCLWP

FG-150KCLWP

6. Part Names

●AC Adapter

Weighing Pan

（SUS304）

Display Unit (SUS304)

USB Cable

（

Approx.3m

）

USB Plug

Base Unit

（SUS304）

Load Cell

Cable

Rear of

Display Unit

Leveling Feet

Rating Label

Serial Number

Pole

（SUS304）

Display

unit knob

6.1. Display and Symbols

Display Unit

Display/symbol Description

STABLE

〇

This is lit when the weighed value is stable, indicating that the scale is in

the proper condition for reading weighed values.

NET This is lit when weight of the container (tare) is subtracted.

ZERO This is lit when the scale is at the zero point (reference point for weighing).

Weighing Units “kg”, “g” ,“pcs” ,“oz” and “lb” is lit.

Note: “g” is only used with the FG-30KCMW P.

This is lit when the display is held.

This is a function to detect impact to the mass sensor section and to

display the impact level.

Lights up when successfully connected to the optional FG-27CWP

(Bluetooth communication interface).

While the comparator function is being used, the weighed value is

compared using the preset threshold values and the indicator displays the

result.

Weighing

Condition

Conditions for

Each Function

Weighing Units

Comparator LED

6.2. Operation Keys

Operation key Description

ON/OFF Key

Shows or hides the display.

Note: When the power plug of the scale is connected, power is supplied

to the electric circuits inside the scale.

SAMPLE Key

Selecting “pcs” as the unit activates individual weight setting mode.

Pressing and holding activates comparator threshold setting mode.

PRINT Key

Outputs the weighed value as data.

Increases the value of the digit flashing when setting.

MODE Key

Switches the weighing unit.

Shifts to the right the digit flashing when making settings.

ZERO Key

Performs zeroing operation. (See below.)

TARE Key

Performs tare operation. (See below.)

Saves the set value and proceeds to the next item when setting.

Zeroing operation

With the zero point gained when turning on the display (power on zero function) as reference,

pressing the ZERO key when the weighed value is stable within ±2% of the weighing

capacity sets the zero point there and the zero point indicator ◄ is lit when zero is displayed.

If tare function is in use, the net is deleted.

Tare function

Pressing the TARE key when the weighed value is a stable positive value subtracts the

weight of the item on the weighing pan as the weight of the container (tare) weight. The

displayed value becomes zero value and both the zero point indicator ◄ and net indicator ◄

are lit.

If the container (tare) is removed from the weighing pan while the tare function is in use and

the value returns to the zero point, net is displayed as a negative value.

Note: The weighing range is reduced by the amount of the tare mass.

Power on Zero Function

Power on zero is a function that displays zero along with the zero point indicator ◄when the

display is turned on by the ON/OFF key with nothing on the weighing pan.

The power on zero function can be used within a range ±50% of weighing capacity from zero

during sensitivity adjustment.

Note: If a tare or similar device is used on the weighing pan before weighing starts (power on),

weighing performance may be affected.

Ce manuel convient aux modèles suivants

Autres manuels AND Échelle

AND

AND HL-WP Series Manuel utilisateur

AND

AND GX-L Series Manuel utilisateur

AND

AND PLUSCONNECT UC-350CNBLE Manuel utilisateur

AND

AND FZ-i Series Manuel utilisateur

AND

AND UC-324NFC Manuel utilisateur

AND

AND UC-324ANT Manuel utilisateur

AND

AND HL-200i Manuel utilisateur

AND

AND UC-355PBT-Ci Manuel utilisateur

AND

AND UC-324TMW Manuel utilisateur

AND

AND SJ-2000H Manuel utilisateur

AND

AND PREMIUM UC-352CNBLE Manuel utilisateur

AND

AND HT-300CL Manuel utilisateur

AND

AND HV-CWP Series Manuel utilisateur

AND

AND UC-352BLE Manuel utilisateur

AND

AND GR Series Manuel utilisateur

AND

AND HV-15KC Manuel utilisateur

AND

AND EK-610j Manuel utilisateur

AND

AND LifeSource UC-350CNBLE Manuel utilisateur

AND

AND UC-321 Manuel utilisateur

AND

AND SJ-WP Series Manuel utilisateur

AND

AND HVL-CS Manuel utilisateur

AND

AND SJ-3000WP/-BT Manuel utilisateur

AND

AND UC-352BLE Manuel utilisateur

AND

AND GX-M Series Manuel utilisateur

Manuels Échelle populaires d'autres marques

AWS

AWS ZEO-50 Manuel utilisateur

Gima

Gima Glass Body Fat Analyzer Manuel de la liste des pièces

Seca

Seca 374 Manuel utilisateur

TEC

TEC TEC SL59 SERIES Manuel utilisateur

Axis

Axis B/E Series Manuel utilisateur

Alecto

Alecto ACW-40 Manuel utilisateur

Rice Lake

Rice Lake MSI-4260 IS Manuel utilisateur

IKA

IKA RCT basic safety control Manuel utilisateur

ADE

ADE M20011 Manuel utilisateur

Duronic

Duronic KS3000 Manuel utilisateur

Digi

Digi SM-720 Manuel utilisateur

Cardinal

Cardinal CS Series Manuel utilisateur

Korona

Korona Kastella Manuel utilisateur

A&D

A&D FC-50Ki Manuel utilisateur

BDA

BDA CAMARGUE Manuel utilisateur

Tanita

Tanita HD-357 Manuel utilisateur

Leifheit

Leifheit 03173 Manuel utilisateur

Lumme

Lumme LU-1340 Manuel utilisateur