AMX Electroluminescent LCD Touch Panels Manuel utilisateur
(OHFWUROXPLQHVFHQW#7RXFK#3DQHOV
+)LUPZDUH#YHUVLRQ#*5#RU#ORZHU,
,QVWUXFWLRQ#0DQXDO
;18¨#7RXFK#3DQHOV#DQG#$FFHVVRULHV
Limited Warranty and Disclaimer
AMX Corporation warrants its products to be free from defects in material and
workmanship under normal use for a period of three years from date of purchase
from AMX, with the following exceptions. Electroluminescent and LCD control
panels are warranted for a period of three years, except for the display and touch
overlay components which are warranted for a period of one year. Disk drive
mechanisms, pan/tilt heads, power supplies, modifications, MX Series products,
and KC Series products are warranted for a period of one year. Unless otherwise
specified, OEM and custom products are covered for a period of one year. AMX
software products are warranted for a period of 90 days. Batteries and incandescent
lamps are not covered.
This warranty extends to products purchased directly from AMX or an authorized
AMX dealer. Consumers should inquire from selling dealer as to the nature and
extent of the dealer’s warranty, if any.
AMX is not liable for any damages caused by its products or for the failure of its
products to perform, including any lost profits, lost savings, incidental damages, or
consequential damages. AMX is not liable for any claim made by a third party or
made by you for a third party.
This limitation of liability applies whether damages are sought, or a claim is made,
under this warranty or as a tort claim (including negligence and strict product
liability), a contract claim, or any other claim. This limitation of liability cannot be
waived or amended by any person. This limitation of liability will be effective even
if AMX or an authorized representative of AMX has been advised of the possibility
of any such damages. This limitation of liability, however, will not apply to claims
for personal injury.
Some states do not allow a limitation of how long an implied warranty lasts. Some
states do not allow the limitation or exclusion of incidental or consequential
damages for consumer products. In such states, the limitation or exclusion of the
Limited Warranty may not apply to you. This Limited Warranty gives you specific
legal rights. You may also have other rights that may vary from state to state. You
are advised to consult applicable state laws for full determination of your rights.
EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, AMX MAKES NO OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. AMX EXPRESSLY DISCLAIMS ALL WARRANTIES NOT
STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW
ARE LIMITED TO THE TERMS OF THIS LIMITED WARRANTY.
Electroluminescent Touch Panels Table of Contents i
Table of Contents
Introduction ............................................................................ 1
Overview 1
Touch Panel Systems 1
System Requirements 2
As a unit in an AXCESS System 2
Stand-alone with a computer or other
RS-232 device 2
Touch Panel Features 3
Installation 3
Operation ................................................................................ 5
Overview 5
Standard Buttons 5
Startup Main Page 8
Setup Button 8
Protected Setup 10
Editor Mode 12
Button Editing 12
Page Editing 14
Icon Editing 15
Specifications....................................................................... 19
Overview 19
Cable Wiring Diagrams 20
Computer to EL+, RS-232, 25-pin D to 9-pin D 20
Computer to EL+, RS-232, 9-pin D to 9-pin D 20
AXCESS to EL+, AXlink and DC power, 4-pin
captive wire connector 21
AXCESS to EL+, AXlink and DC power,
mini XLR 21
Alternate DC power to EL+ 2-pin captive
wire connector 21
Technical Support ................................................................ 23
Overview 23
ii Table of Contents Electroluminescent Touch Panels
Appendix: Page and Function Finders................................. 25
Overview 25
Touch Panel Function Finder 26
EL+ Function Finder 1 27
EL+ Function Finder 2 28
EL+ Function Finder 3 29
EL+ Function Finder 4 30
EL+ Function Finder 5 31
EL+ Function Finder 6 32
Electroluminescent Touch Panels Introduction 1
Introduction
Overview
The electroluminescent touch panels are stand-alone controllers that contains a
microprocessor to control a wide variety of audiovisual equipment. The Touch
Panels are capable of providing full-featured control of a variety of multimedia
installations. Equipment control alternatives include: presentations,
teleconferencing, audio recording and amplifier control, video and television,
lighting systems, screens, drapes, environmental systems, and security systems.
Touch Panel Systems
The Touch Panels are self-contained units that may be used to control a wide variety
of equipment from the AXlink bus, the RS-232 port, or a combination of both. One
system arrangement, shown in Figure 1, allows you to develop a variety of Touch
Panel control functions.
EL+
Mouse (optional)
or internal RS-232
port
AXlink cable
AXCESS CardFrame
Television
VCR
Lighting
Camera
Once you have developed your control pages, you can use the AMX TPDOC
software with your computer to save them for backup and other applications. You
Figure 1
Typical Electroluminescent
Touch Panel and AXCESS
system
2Introduction Electroluminescent Touch Panels
can also use TPDOC software to upload drawings for use with Touch Panel pages.
Refer to the TPDOC User's Manual for more information.
The Touch Panel uses the AXlink 4-wire bus to connect to the AXCESS Server and
Master Cards or to the AXCENT system. Your computer connects to one of the RS-
232 ports on the AXCESS system or to the program port on the AXCENT system.
Additionally, for developing and controlling Touch Panel pages, you can connect an
optional Microsoft or Logitech mouse to the Touch Panel RS-232 port.
When you select MOUSE from the protected setup page, the data rate is
automatically set to 1,200 baud. You can set the data rate for your computer or other
RS-232 device as described in Operation
System Requirements
As a unit in an AXCESS System
Use interactive AXCESS language programs for sending data to and receiving data
from a Touch Panel. Button feedback is provided by the AXCESS system to indicate
response to button attributes and functions.
• AXCESS CardFrame and appropriate control cards or AXCENT devices.
• AXCESS cable for 12V DC power and the AXCESS AXlink signal bus
• AMX 12V DC power module for AXCESS or AXCENT power
• RS-232 cable, DB-9 female to DB-9 female, or DB-9 female to DB25 female as
required by your computer or other RS-232 device
• MS/PC-DOS computer and system software, and TPDOC for saving and
retrieving Touch Panel pages and drawings
• Optional Microsoft or Logitech mouse for page development and Touch
Panel operation
Stand-alone with a computer or other RS-232 device
Develop your control pages with regular touch buttons and icons. Use string, output
button attributes to send RS-232 data to a computer or other RS-232 device for
controlling a system. Call AMX Technical Support (see Technical Support) about
limitations and restrictions when you want to use Touch Panels in the RS-232-only
configuration.
• AMX 12V DC power module
Electroluminescent Touch Panels Introduction 3
• RS-232 cable, DB-9 female to DB-9 female, or DB-9 female to DB25 female as
required by your computer or other RS-232 device
• MS/PC-DOS computer and system software, and TPDOC software for
saving and retrieving Touch Panel pages and drawings
• Optional Microsoft or Logitech mouse for page development and Touch
Panel operation
Touch Panel Features
Features of the Touch Panels include those needed to:
• Create Touch Panel pages
• Create touch control buttons and use special Touch Panel icons
• Edit page configurations
• Interface with the AXlink bus and AXCESS System Language Control
AXCESS boards from Touch Panel pages
− Control AXCENT devices from Touch Panel pages
− Save page configurations to computer disk
− Load page configurations from disk
− Import graphic images from computer disk
− Develop interactive AXCESS Language control program
• Provide RS-232 communication
− Microsoft or Logitech mouse input for Touch Panel page development
and use
− Send data and messages to a PC or other RS-232 system control device
Installation
For installation instructions, refer to the, AXU-EL+ and AXU-EL+/PB UniMount
Touch Panel Reference Guide.
4Introduction Electroluminescent Touch Panels
Electroluminescent Touch Panels Operation 5
Operation
Overview
Once you have applied power to your Touch Panel, you are ready for Touch Panel
setup. When you complete the setup steps you can begin creating your own control
pages. Touch Panel page development is accomplished with the features and
functions described in the remainder of this section.
Standard Buttons
Several standard Touch Panel buttons are included for development and use of your
Touch Panel pages. They appear with the options you will use to create and use the
Touch Panel pages. Figure 2 illustrates most of the buttons included for Touch Panel
page development and use. The keyboard is illustrated in Figure 3.
6Operation Electroluminescent Touch Panels
v2.xx
SET
0
AXlink
SET TIME
AND DATE
DOUBLE
BEEP
SET TIME
SET
1
2 3
4 5
0
6
0
7 8 9
CLEAR ENTER
BUTTON PAGE ICONS SYSTEM EXIT
ADJUST ATTRIBUTES TO DESIRED LEVELS EXIT
PROTECTED
SETUP
SERIAL NUMBER
797 - XXXX
XX TIMER
5 min
Message Bar
Editor Bar
Exit Active
All Sessions Active
Selection
Information
Keypad
CLEAR - Delete entry
ENTER - Accept entry
Button title
Variable data
Up and down buttons
* * NONE **
MAIN PAGE List of pages
Scroll with up and
down buttons
ENTER - Accept entry
YES NO
Text for decision here
Make decision by touching YES or NO
NO COMMUNICATION
TOUCH SCREEN TO CONTINUE
Functional message
ENTER
Figure 2
Touch Panel standard buttons
Autres manuels pour Electroluminescent LCD Touch Panels
1
Table des matières
Autres manuels AMX Écran tactile
AMX
AMX Modero NXD-1000Vi Manuel de la liste des pièces
AMX
AMX Modero Viewpoint MVP-5200i Manuel utilisateur
AMX
AMX MXD-1000 Manuel utilisateur
AMX
AMX Modero NXD-1700VG Manuel utilisateur
AMX
AMX AXT-MCP Mode d’emploi
AMX
AMX Modero ViewPoint MVP-5100 Manuel utilisateur
AMX
AMX Modero NXD-700Vi Manuel utilisateur
AMX
AMX MXT-701 Manuel utilisateur
AMX
AMX MSA-MMK/2-10 Manuel utilisateur
AMX
AMX Modero NXD-CV5 Manuel utilisateur
AMX
AMX AXM-MLC Mode d’emploi
AMX
AMX Modero ViewPoint MVP-8400i Manuel utilisateur
AMX
AMX MXT/D-2000-PAN Manuel utilisateur
AMX
AMX Modero X Series G5 MXT-2001-PAN Manuel utilisateur
AMX
AMX AXU-MCA Mode d’emploi
AMX
AMX Modero NXD-500i Manuel de la liste des pièces
AMX
AMX Modero NXD-1000Vi Manuel de la liste des pièces
AMX
AMX Modero MXT-2001-PAN Manuel utilisateur
AMX
AMX Modero ViewPoint MVP-7500 Manuel de la liste des pièces
AMX
AMX Modero Viewpoint MVP-5200i Manuel utilisateur
Manuels Écran tactile populaires d'autres marques
IBASE Technology
IBASE Technology ASTUT-152-RE1S Manuel utilisateur
YASKAWA
YASKAWA TP 610C Manuel utilisateur
B&R
B&R Power Panel C Series Manuel utilisateur
Beijer Electronics
Beijer Electronics X2 control Manuel utilisateur
AXIOMTEK
AXIOMTEK GOT321W-521 Manuel utilisateur
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Manuel utilisateur
