AMS Venus T5 mini Manuel utilisateur
2009/07/16
Page 1
Venus T5
Venus T5
SATA RAID
User Manual
2009/07/16
Page 2
Venus T5
Contents
1. Features of ....................................................................................................................................................4
2. Introduction...................................................................................................................................................6
3. Getting Start..................................................................................................................................................8
3.1 Basic Mode...................................................................................................................................................8
3.1.1 RAID and Disk Information...................................................................................................................8
3.1.1.1 Controller Information.........................................................................................................................8
3.1.1.2 RAID Information...............................................................................................................................11
3.1.1.3 Disk Information..................................................................................................................................11
3.1.2 Event Log Viewer....................................................................................................................................13
3.1.3 Basic RAID Configuration.....................................................................................................................15
3.2 Advanced Mode..........................................................................................................................................19
3.2.1 Email Notification And Event Settings.................................................................................................19
3.2.2 Advanced RAID Configuration.............................................................................................................20
3.2.3 Firmware Information...........................................................................................................................25
4. DIP Switch and RAID Mode Cross Reference..........................................................................................28
Figures
Figure 1 – Tray Figure......................................................................................................................................4
Figure 2 – Appearance Figure..........................................................................................................................4
Figure 3 – Caddy Drive Drawer Install...........................................................................................................4
Figure 4 – Front Panel.......................................................................................................................................5
Figure 5 – Rear View.........................................................................................................................................5
Figure 6 – Functional Button............................................................................................................................6
Figure 7 – Basic Mode.......................................................................................................................................7
Figure 8 – Advanced Mode...............................................................................................................................7
Figure 9 – Controller Information...................................................................................................................9
Figure 10 – Identify The Controller...............................................................................................................10
Figure 11 – System Information.....................................................................................................................10
Figure 12 – RAID Information.......................................................................................................................11
Figure 13 – Disk Information.........................................................................................................................12
Figure 14 – SMART Information...................................................................................................................13
Figure 15 – Event Log Viewer........................................................................................................................14
Figure 16 – Save The Event Logs To A File...................................................................................................14
Figure 17 – Create RAID 10...........................................................................................................................15
Figure 18 – Setting Password for new RAID................................................................................................16
2009/07/16
Page 3
Venus T5
Figure 19 – Confirmation Dialog...................................................................................................................16
Figure 20 – Show Configuration Progress Window.....................................................................................17
Figure 21 – Information Message Box..........................................................................................................17
Figure 22 – Warning Message Box................................................................................................................18
Figure 23 – Update Disk Charts After Creating RAID...............................................................................18
Figure 24 – Update Disk Charts After Deleting All RAID..........................................................................19
Figure 25 – Email Notification and Event Settings......................................................................................20
Figure 26 – “Select All Events” Button and “Clear All Events” Button....................................................20
Figure 27 – Advanced RAID Configuration.................................................................................................21
Figure 28 – Advanced RAID Configuration.................................................................................................22
Figure 29 – Modify RAID Disk Size..............................................................................................................23
Figure 30 – Delete RAID................................................................................................................................24
Figure 31 – Select The Deleted RAID And Provide Password....................................................................25
Figure 32 – Firmware Update........................................................................................................................26
Figure 33 – Show Progress Bar......................................................................................................................27
Figure 34 – Show Dialog to Reboot The System...........................................................................................27
2009/07/16
Page 4
Venus T5
1. Features
zAluminum Frame, Aluminum cover
zInterface support SATA-І, SATA-ІІ
zHigh performance transfer rate up to 1.5Gbps, 3.0Gbps
zPlug & play ,hot swappable
zAC Power control
zEasy RAID setting by DIP switch & apply (change mode) switch
zLED indicators(for System Ready, HDD Error, HDD Access, Temperature, fan)
z8x8cm Fan X 2— High/Low speed selectable
zReset switch or OTB switch for option
zColor: BLACK
zDim:215(L)x156(W)x211(H)mm
zPatent products with advanced structure design
zPatent balance handle-no skew in/out problem and avoid the abrasion during connection
zPrecisely connection on connector (see Figure 1)
Figure 1
Figure 2
`
Figure 3
2009/07/16
Page 5
Venus T5
---Front Panel--- (see Figure 4)
Figure 4
D1:Temperature LED
D2:Fan LED
D3---D7: HDD Access and failure LED (Green LED
is lighting when HDD link and blinking
when HDD access; the LED will turn red
when HDD failed. The green LED and red
LED will alternate during rebuilding)
D8:SYS LED: Lighting while system is ready
D9:SYS Reset or Backup (option)
D10:HDD Safety Lock
D11:Power LED
D12:Power Safety Lock (The safety lock prevent
it bouncing out while HDD is working)
D13:120W Switching Power Supply
---Rear View--- (see Figure 5)
Figure 5
E1:Cooling Fan #1 (8x8cm)
E2:Fan Speed Control FAN RPM HIGH(3600rpm)&
LOW(2800 rpm) Options(If you want the fan to
run at a high speed ,switch to the right; otherwise
, switch to the left
E3: Cooling Fan #2 (8x8cm)
E4: Reset/Change Mode (push button less than 2
seconds for system reset / hold button over than
2 seconds for apply new RAID mode)
E5:RAID CONFIGURE SW
E6:ESATA
E7:Power SW
E8:Power Input(AC 100V-240V)
2009/07/16
Page 6
Venus T5
2. Introduction
This guide explains how to use JMB39X HW RAID Manager to configure RAID and monitor the status
of the disks connected on JMB39X hardware RAID controller.
Once JMB39X HW RAID Manager is launched, the JMB39X HW RAID Manager GUI window will be
opened and the application icon could also be found in the notification tray located at the bottom right
hand corner of the screen.
For the consideration of different user experiences and achieving the ease of navigation, the main GUI is
divided into two modes (“Basic mode” and “Advance mode”).
When the user presses the “Basic Mode” button on the right side of the GUI window, there are three
buttons to be chosen for navigating the corresponding basic pages. Those basic pages are “RAID and
Disk Information” page, “Event Log Viewer” page and “Basic RAID Configuration” page. Users could
simply do basic RAID configuration and browse all disks and RAID information as well as the event
logs in this basic mode.
For the advanced users, they could press the “Advanced Mode” button to invoke another three advanced
pages and do the advanced settings. Those advanced pages are “Email Notification and Event Settings”
page, ”Advanced RAID Configuration” page and “Firmware Update ” page.
Besides, there are some buttons appearing on the upper part of the GUI window and they are provided
for users to minimize the window, close the window, turn off the buzzer (if the buzzer exists), and open
the About Window.
Figure 6 – Functional Buttons
2009/07/16
Page 7
Venus T5
Figure7 – Basic Mode
Figure 8 – Advanced Mode
2009/07/16
Page 8
Venus T5
3. Getting Started
The following sections will lead you go through all basic pages and advanced pages. Let us start with
the “RAID and Disk Information” page.
3.1 Basic Mode
The basic mode is aimed to provide users to navigate the disk and RAID information, the event log as
well as do the basic configuration to the connected disks.
3.1.1 RAID and Disk Information
This page consists of two parts. The left part is a tree which shows all controllers on this platform and
their connected RAID and disks in a hierarchy view. When the user selects a tree item, the detail
information of the selected item will be displayed in the right part. All the disk and RAID information
will be updated in real–time and users could monitor the status easily.
3.1.1.1 Controller Information
If the user selects a controller item from the tree view, it will display the model name and capacity of the
RAID and disks connected on the specified controller at the right top table and also display all
connected disk charts at the right bottom area. For RAID member disks, the disk charts will be drawn
with the different colors according to the different RAID.
2009/07/16
Page 9
Venus T5
Figure 9 – Controller Information
When the user move the mouse upon the “Controller Information” label, it will be highlighted with red
color and show a tool-tip to tell that it could be clicked to identify the controller with the specified host
LED flashing.
2009/07/16
Page 10
Venus T5
Figure 10 – Identify the Controller
If the hardware monitor controller exists, the application will show an “Advanced…” label at the right
bottom corner of the table. The user could simply click it to browse the system information.
Figure 11 – System Information
Table des matières
Autres manuels AMS Enceinte
