Amrotec MiB-11V Manuel utilisateur
MiB-11V
Stacker w/Reject Pocket Currency Discriminator
Instruction Manual V.01
Banknote Discrimination Counter
-
1
-
Note
The information or material contained in this document is the property of AMROTEC® -
registered trademark of Amro-Asian Trade, Inc. Any recipient of the information or material
contained in this document shall not disclose or divulge, directly or indirectly, this document
or the information or material contained herein without the prior written consent of Amro-
Asian Trade, Inc.
The above duty of confidence also entails a prohibition of reproduction of this text without
specific authority, in writing, from Amro-Asian Trade, Inc.
This guide covers the installation, operation and troubleshooting of Mib-11V Currency
Discriminating Counter. We recommend reading this guide thoroughly before operating the
Currency Discriminator. Then, as you become more familiar with Mib-11V, use it as a
reference guide to look up information when you need it.
Banknote Discrimination Counter
-
2
-
Please read the safety precautions below before operating MiB-11V Currency Discriminator Counter.
These safety precautions guideline must be observed to avoid any potential hazards that could resulted
in personal injuries or damage to MiB-11V Currency Discriminator Counter.
Electrical Safety Information
Always be careful in operating the Machine. To reduce the risk of fire, electrical
shocks, and other injuries, keep these safety considerations in mind when installing,
operating, and maintaining of your Machine.
Stability
Place the Machine on a secure and stable surface on a desk. The Machine can
seriously get damaged if it falls from the desk or during movement.
Power Supply
Machine should always be connected to correct power as listed on this user manual
and on the label located on the rear side of the Machine.
Grounding
Machine must be plugged into a grounded (three-hole) outlet. Grounded plugs and
outlets are designed for your safety - do not try to make a three-prong plug fit into a
two-prong outlet by modifying the plug or outlet in any way. please contact your
service provider or a qualified certified electrician if you are unable to plug the
Machine into your electrical outlet or power stripe.
Overload
Do not plug too many electrical Machines into a wall outlet or into a power strip. Do
not use an extension cord in any situation. An overloaded outlet could be a reason of
a fire and electrical shock hazard, further could damage the Machine severely.
Cleaning
Before cleaning the Machine, unplug the Machine from the power outlet. Clean
external surface of Machine with a soft cloth slightly dampened with water. Do not use
aerosol cleaners.
Gas Leaks
Never place the Machine close to a gas outlet nor operate the Machine around the
outlet. In case of a gas leak, it could spread into electrical part of the Machine causing
spark resulting in fire or explosion.
Banknote Discrimination Counter
-
3
-
Precaution
1. Never push any objects of any kind onto the Machine side covers or insert any
object through any opening of the Machine.
2. Do not operate your Machine in any wet location, or outdoors or if you are wet.
Always keep liquid away from the Machine. If water spills occur, turn off and unplug
the Machine immediately and contact your service provider.
3. Do not allow anything to rest on the power cord, line cord, or PC interface cable.
Do not place the Machine where power cords can be damaged or unplugged by
person walking or stepping on them.
4. Do not allow pets near the Machine or to chew on the power cord or PC interface
cable.
5. Use supplies or cleaning materials only as directed. Keep all supplies and
materials out of the way of children.
6. Make sure that the Machine is installed near an outlet and is easily accessible.
7. Never remove side covers or guards that require a tool for removal. This Machine
is not designed for user or operators to service the Machine by themselves. Always
refer servicing to authorized service personnel.
8. Never defeats interlock switches. This Machine is designed to restrict operator
access to unsafe areas. Covers, guards and interlock switches are provided to
ensure that the Machine will not operate with covers opened.
9.Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instruction.
Managing the performance of the Machine
This Machine is equipped with many sophisticated sensors. Without periodical and
proper maintenance and servicing, Machine cannot perform well and last long. Please
read the ‘Maintenance’ section on this User manual and perform basic surface
cleaning every day. Contact your service provider or sales representative to sign up
with yearly maintenance plan with them.
Banknote Discrimination Counter
-
4
-
Hazardous Safety Notes
Your Machine and related accessories included in the original packaging are designed
and tested to meet strict safety requirements. Please read the following instructions
carefully before operating your Machine and refer to them as needed to ensure the
continued safe operation of your Machine.
Either the symbol , or a similar symbol, combined with the triangle shaped
warning sign from ISO 3864-2, or the following statement or equivalent text shall be
used:
FCC Compliance Statement
THIS MACHINE COMPLIES WITH PART 15 OF FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING CONDITIONS:
THIS MACHINE MAY NOT CAUSE HARMFUL INTERFERENCE, AND THIS
MACHINE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
WARNING
Keep away Hazardous moving parts from moving Stacker blades.
WARNING
Hazardous moving parts!
Keep fingers and other body parts away
Banknote Discrimination Counter
-
5
-
Changes or modifications of this product not expressly
approved by manufacturer, could void the user’s
authority to operate the equipment.
FCC Notice
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses and can emit
radio frequency energy and, if not installed and used in accordance with the
instruction manual may cause harmful interference in radio communications.
Operation of this equipment in a residence area is likely to cause harmful interference
in which case the users will be required to correct the interference at their own
expense.
This manual shows user general symbols for safety information and symbols to
identify special dangers.
Refer to the below Icons before reading Manual.
Icon Word Explanation
DANGER
WARNING
This symbol with the signal word (Danger/
Warning) refers to an immediate risk / threat to
life or body injury.
CAUTION
This symbol is to identify safety information.
Ignoring this warning can result in damage to
the Machine or endanger data consistency.
Banknote Discrimination Counter
-
6
-
Table of contents
Chapter 1 INSTALLATION ---------------------------------------------------------------------- 9
Packing List/ Work Area/ Handling/ Power On /Off --------------------------------------- 9
Machine Interface --------------------------------------------------------------------------------10
Chapter 2 OVERALL DESCRIPTIONS --------------------------------------------------------- 11
2-1 Description of the Parts ------------------------------------------------------------- 11
2-2 Description of Control --------------------------------------------------------------- 12
Overview of Control Panel ---------------------------------------------------------------------- 12
Overview of Touch Screen ---------------------------------------------------------------------- 13 - 14
Chapter 3 PREPARATION OF OPERATION --------------------------------------------------15
How to open and close ‘Upper Cover’ and ‘Rear Cover/Door’ ------------------------- 15
How to place banknotes onto the Hopper --------------------------------------------------- 16
Counting --------------------------------------------------------------------------------------------- 17
Chapter 4 BASIC OPERATION ------------------------------------------------------------------ 18
4-1 Procedure of Operation ------------------------------------------------------------- 18
4.1.1 Currency Selection ------------------------------------------------------------------------ 18
4.1.2 Discriminating Mode Selection --------------------------------------------------------- 18 - 22
4.1.3 Function Selection ------------------------------------------------------------------------- 23 - 26
4.1.4 Counting Result Confirmation & Touch Screen Display Configuration ------- 26 - 28
4.1.5 Grand Total ---------------------------------------------------------------------------------- 28 - 29
4.1.6 Reject Reasons ---------------------------------------------------------------------------- 29
4-2 Special Mode and Functions ------------------------------------------------------ 30
Custom Mode ---------------------------------------------------------------------------------------30 - 32
ADD --------------------------------------------------------------------------------------------------- 32
1. ADD Type -------------------------------------------------------------------------------------- 32
2. ADT Type -------------------------------------------------------------------------------------- 32 - 33
3. BAG Type -------------------------------------------------------------------------------------- 33 - 34
4. COMPLETE Type ---------------------------------------------------------------------------- 35
Chapter 5 SET FUNCTION AND PARAMETERS ------------------------------------------- 36
5-1 USER MENU ---------------------------------------------------------------------------- 36 - 37
Language ------------------------------------------------------------------------------------------- 37
Banknote Discrimination Counter
-
7
-
My Grand Total -------------------------------------------------------------------------------------37 - 38
Count Interface ------------------------------------------------------------------------------------ 39
1. Start Counting -------------------------------------------------------------------------------- 39
2. Pocket Capacity ------------------------------------------------------------------------------ 39
3. Accept Result --------------------------------------------------------------------------------- 39 - 40
4. Report Result --------------------------------------------------------------------------------- 40
5. Counting Report ----------------------------------------------------------------------------- 40
6. Set Count Display --------------------------------------------------------------------------- 40
7. Fan Operating Option ---------------------------------------------------------------------- 41
User Interface ------------------------------------------------------------------------------------- 41
1. Setting of date/time ------------------------------------------------------------------------- 41
2. Selection method of items ---------------------------------------------------------------- 41
3. Sorting Order --------------------------------------------------------------------------------- 41
4. LCD Brightness ------------------------------------------------------------------------------ 41
5. Beep -------------------------------------------------------------------------------------------- 42
6. Power Saving -------------------------------------------------------------------------------- 42
Information ---------------------------------------------------------------------------------------- 42
1. About Machine ------------------------------------------------------------------------------- 42
2. A/S call number ------------------------------------------------------------------------------ 42
Admin menu ---------------------------------------------------------------------------------------- 43
Motor Speed ---------------------------------------------------------------------------------------- 43
5-2 ADMIN MENU -------------------------------------------------------------------------- 44 - 45
Loading Default ------------------------------------------------------------------------------------ 45
Change Passwords ------------------------------------------------------------------------------- 46
Machine Setting ---------------------------------------------------------------------------------- 46
1. Station ID -------------------------------------------------------------------------------------- 46
2. Ethernet ---------------------------------------------------------------------------------------- 46
3. FTP Information ------------------------------------------------------------------------------ 46 - 47
4. Black List -------------------------------------------------------------------------------------- 47
5. Printer ------------------------------------------------------------------------------------------ 47 - 48
6. Customer Display --------------------------------------------------------------------------- 48
7. Way of Motor Stop -------------------------------------------------------------------------- 48
Function on/off ----------------------------------------------------------------------------------- 48
1. CF Detectors --------------------------------------------------------------------------------- 48 - 49
2. Mode Setting --------------------------------------------------------------------------------- 49
Banknote Discrimination Counter
-
8
-
3. Auto Default Loading ----------------------------------------------------------------------- 49 - 50
User Setting ----------------------------------------------------------------------------------------- 50
Grand Total ---------------------------------------------------------------------------------------- 51
1. Auto Clear ------------------------------------------------------------------------------------- 51
2. Clear Target ----------------------------------------------------------------------------------- 51
3. Initialize all ------------------------------------------------------------------------------------ 51 - 52
4. Summary -------------------------------------------------------------------------------------- 52
5. Each User ------------------------------------------------------------------------------------- 52
Log Data --------------------------------------------------------------------------------------------- 53
Chapter 6 TROUBLESHOOTING --------------------------------------------------------------- 54
Error during Counting ---------------------------------------------------------------------------- 54
Chapter 7 MAINTENANCE ----------------------------------------------------------------------- 55
1. Sensor Cleaning ----------------------------------------------------------------------------- 55 - 56
2. Roller Cleaning ------------------------------------------------------------------------------- 56
3. Dust tray Cleaning --------------------------------------------------------------------------- 57
Chapter 8 SPECIFICATIONS --------------------------------------------------------------------- 58
Limited Warranty, Disclaimer, Service------------------------------------------ 59
Autres manuels pour MiB-11V
4
Table des matières
Autres manuels Amrotec validateur de billets de banque
Manuels validateur de billets de banque populaires d'autres marques
Alberici
Alberici BILLYONE UN1 Manuel utilisateur
Kolibri
Kolibri Bishop Manuel utilisateur
Royal Sovereign
Royal Sovereign RCD-2000 Manuel utilisateur
Innovative Technology
Innovative Technology BV100 Manuel utilisateur
Innovative Technology
Innovative Technology NV4 Manuel utilisateur
Innovative
Innovative NV200 Manuel utilisateur
Innovate Technology
Innovate Technology NV10 Manuel utilisateur
JCM
JCM iVIZION Manuel
Innovative Technology
Innovative Technology NV10 Family Manuel utilisateur
Crane
Crane NRI G-13.mft Standard Manuel utilisateur
CASH TECHNOLOGY
CASH TECHNOLOGY CCE 20 Manuel utilisateur
JCM
JCM VEGA Series Manuel utilisateur