CashCode AMZ-154 Manuel utilisateur
CashCode - Installation Instructions for the New $ 5 and $ 10 upgrade kit
Stackerless Models AMZ-154 and AMZ-PLUS with PLCC type CPU chip
Page 1 of 5
00-04-$510 Happ-Upgrade Instructions-Stackerless
INSTALLATION INSTRUCTIONS FOR
THE NEW $ 5 AND 10 UPGRADE KIT
Stackerless models AMZ-154 and AMZ-PLUS with PLCC type CPU chip
Validator with internal motor Validator with
external motor
PLCC type CPU chip (Please check for PLCC type CPU chip -
this upgrade kit will not work with a DIP chip)
PLCC Chip DIPChip
Chamfered Edge
CashCode Co. Inc.
553 Basaltic Road
Concord, Ontario
Canada L4K 4W8
Tel. (905) 303-8874
Fax (905) 303-8875
Web Site: www.cashcode.com
_____________________________________________________________________
US2xxx30
US4xxx30
US5xxx30
CashCode - Installation Instructions for the New $ 5 and $ 10 upgrade kit
Stackerless Models AMZ-154 and AMZ-PLUS with PLCC type CPU chip
Page 2 of 5
PARTS ENCLOSED:
1 x PLCC type CPU with embedded program
1 x Label "New $ 5 & $10 Ready"
TOOLS REQUIRED:
Wrist ground strap PLCC extraction tool
Happ Controls Part No. Happ Controls Part No.
80-0308-00 92-0267-00
Flat head screwdriver Flat tweezers
Happ Controls Part No. Happ Controls Part No.
92-0206-02 92-0256-00
CashCode - Installation Instructions for the New $ 5 and $ 10 upgrade kit
Stackerless Models AMZ-154 and AMZ-PLUS with PLCC type CPU chip
Page 3 of 5
INSTRUCTIONS:
STEP 1: Remove two (2) screws or plastic rivets from the bottom cover plate on the validator
and remove the cover plate. Be sure to retain the screws/rivets.
RIVET
SPACER
CPU
CIRCUIT BOARD
COVER
RIVET
CashCode - Installation Instructions for the New $ 5 and $ 10 upgrade kit
Stackerless Models AMZ-154 and AMZ-PLUS with PLCC type CPU chip
Page 4 of 5
STEP 2: Please note which cable goes to which connector. Use the small flat head driver and
lift the cable connector heads up to release the cables. Use the tweezers and gently
pull the cables up and out from the connectors on the CPU printed circuit board.
CHAMFERED EDGE
STEP 3: Attach the ground strap to your wrist and the other end with the clip to a metal water
pipe or electric ground.
STEP 4: Remove the plastic rivet from the side of the validator and remove the circuit board.
Locate the CPU chip to be replaced.
STEP 5: Locate the corner slots in the socket and insert the hooks of the extraction tool. While
gently squeezing the tool, the chip can be lifted out of the socket. Pay attention to the
fact that one corner of the chip has a chamfered edge. The socket also has a corner to
fit this edge.
INSERT
EXTRACTOR
TOOL HOOK INSERT
HERE EXTRACTOR
TOOL HOOK
HERE
CHAMFERED
HOOKS EDGE
CashCode - Installation Instructions for the New $ 5 and $ 10 upgrade kit
Stackerless Models AMZ-154 and AMZ-PLUS with PLCC type CPU chip
Page 5 of 5
STEP 6: Locate the chamfered edge on the new chip, sit the new chip in the socket and press
down. NOTE: The chip should go down into the socket with little effort. DO NOT
FORCE IT. DO NOT ALIGN THE CHIP ACCORDING TO THE POSITION OF THE
LABEL. MATCH THE CHAMFERED EDGE.
Chamfered Edge
STEP 7: DIP switch settings do not change. Re-install the CPU circuit board. Use the tweezers
and place the cables into the connectors. Push the connector heads down to lock the
cables into the connectors. Re-insert the plastic push rivet in the side along with the
spacer. Place the cover plate back and re-insert the two (2) push rivets or screws.
Apply the update sticker to the outside of your validator for reference.
STEP 8: Power up the validator and begin accepting the new $ 5 and $ 10 bills.
US2xxx30
US4xxx30
US5xxx30
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels CashCode validateur de billets de banque
Manuels validateur de billets de banque populaires d'autres marques
Alberici
Alberici BILLYONE UN1 Manuel utilisateur
Kolibri
Kolibri Bishop Manuel utilisateur
Royal Sovereign
Royal Sovereign RCD-2000 Manuel utilisateur
Innovative Technology
Innovative Technology BV100 Manuel utilisateur
Innovative Technology
Innovative Technology NV4 Manuel utilisateur
Innovative
Innovative NV200 Manuel utilisateur
