Amphony 300 BlueFIDELITY Manuel
User and Installation Guide
BlueFIDELITYTM
Bluetooth Audio Amplifier
Model 300
Connect the AC adapter with the amplifier
BEFORE plugging the AC adapter into an
outlet to avoid spark generation!
Contents
Unpacking
Connecting in Stereo configuration
Connecting on Mono configuration
Technical specifications
Safety information
Your warranty
............................................................................. 3
....................................... 4
....................................... 6
........................................................ 8
................................................................ 9
...................................................................... 11
Thank you for purchasing this high-quality Bluetooth audio amplifier
product. This amplifier allows you to wirelessly stream audio from any
Bluetooth enabled device to your speakers. It incorporates advanced
audio amplification technology which offers minimal audio distortion,
extremely small size and high power efficiency.
Prior to operation, you need to attach the antenna to the amplifier and
pair your Bluetooth-enabled device with the amplifier.
Connect the AC adapter with the amplifier BEFORE plugging the
AC adapter into an outlet to avoid spark generation!
Connect power to the amplifier BEFORE connecting the speakers to
the amplifier to avoid switch-on plop.
Unpacking: Check that this package contains:
- one Bluetooth audio amplifier
- one large AC adapter (wallwart)
- one antenna
User and Installation Guide
Page 3
FCC ID PMJB300
This device complies with part 15 of the FCC Rules. Operation is
subjected to the following two conditions: 1) This device may not
cause harmful interference and 2) this device must accept any
interference received, including interference that may cause undesired
operation.
Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority
to operate the equipment.
Attaching the antenna
Page 4
User and Installation Guide
Antenna
Turn the cap
clockwise to
fasten the antenna
The antenna can swivel to other angles.
Speakers
Amplifier
Observe the correct cable polarity when connecting the
speakers.
User and Installation Guide
Page 5
DC 36 V
AC adapter
Outlet
Connecting the AC adapter
Page 6
User and Installation Guide
Status
36V
Bluetooth Amplifier
Connect the AC adapter
with the amplifier
BEFORE plugging the AC
adapter into an outlet to
avoid spark generation!
ATTENTION !
User and Installation Guide
Page 7
Pairing and Connecting
The Bluetooth amplifier must be paired with your Bluetooth-enabled
device in order to be able to stream audio.
To pair the amplifier, power up the amplifier. Then go to the wireless
settings of your Bluetooth device and select "Scan for Bluetooth
devices". If in Windows, select "Add New Device" in the Bluetooth tab.
Once the amplifier is shown as a headset with the name "BlueFidelity",
confirm the pairing on your device. Next your Bluetooth device will
automatically connect to the amplifier. If it doesn‘t, manually select
"Connect". Alternatively, power-cycle the amplifier to connect to your
device after pairing.
If streaming from Windows, note that Windows will install drivers
during the pairing. Manually connect to the amplifier by right-clicking
the headset symbol and selecting "Connect" if Windows does not
connect automatically.
After the pairing is complete, audio can be streamed to the amplifier
from your device.
Reconnecting to the amplifier
If the amplifier or your device is switched off, the connection will be
dropped. When the amplifier is switched back on, it will attempt to
reconnect to any of the devices which it was paired with, starting with
the device with which it was paired last. You can also manually
reconnet to the amplifier by revisiting the Bluetooth settings of your
device. Then simply select the amplifier and select „Connect". The
audio streaming will resume. In Windows, right-click the headset
symbol and select "Connect".
Technical Specifications
Output power: 2 x 40 W (rms)
Wireless range: max. 100 ft line of sight
(the actual range depends on the Bluetooth-enabled device)
Frequency response: 20 Hz - 20 kHz
Dynamic range: typ. 95 dBA
Total harmonic distortion (THD+N):
0.04 % @ 20 W, 1 kHz
Supported Bluetooth Profiles: A2DP, AVRCP
Power efficiency: 93 %
Channel separation: 77 dB
Standby power consumption: < 2 W
Dimensions: 3-9/16 ” (W) x 3-7/16 ” (D) x 3/4 ” (H)
91 mm (W) x 86 mm (D) x 19 mm (H)
Page 8
User and Installation Guide
READ THESE SAFETY INSTRUCTIONS CAREFULLY
AND HEED ALL WARNINGS IN THIS MANUAL.
POWER SOURCE
To avoid product malfunction, and to protect against electric shock, fire or
personal injury, please observe the following:
• This product has been designed to work with 120-volt AC current using
the supplied AC adapters. Connection to a line voltage other than that or
use of non-compatible AC adapters may create a safety and fire hazard
and may damage the product.
• Do not run power cords under carpets or place heavy objects on them.
• Damaged or deformed power cords are hazardous and should be replaced
immediately by a qualified service technician.
LOCATION
• Do not use this product outdoors or in cars.
• Do not place the amplifier in closed spaces, cover it, or otherwise block air
ventilation.
• Do not place this product in direct sunlight, or near heat sources.
• Keep this product away from strong magnetic objects.
VOLUME CONTROL
• Do not turn up the volume while listening to a portion with very low level
input or no audio signal to avoid damage to your speakers during a peak
level audio portion.
• Turn the amplifier volume control to minimum prior to connecting or
disconnecting the amplifier and prior to switching audio sources as this may
cause loud clicks which can damage your speakers.
User and Installation Guide
Page 9
CARE
• Do not place any object containing water or other liquids on this product.
• Do not open the cabinet. Touching parts inside the cabinet could result in
electric shock and damage to the product.
NON-USE PERIODS
• When the product is not being used for a long period of time, unplug the
product.
CLEANING
• Unplug the product before cleaning.
• When the system gets dirty, wipe it with a clean, soft cloth. If necessary,
wipe it with a soft cloth, slightly dampened with soapy water. Wipe dry
immediately with a dry cloth.
• Never use benzene, aerosol cleaners, thinner, alcohol or any volatile
cleaning agent.
• Do not use abrasive cleaners, as they may damage the finish.
SERVICE
• Do not open the cabinet of any components. Opening the cabinets may
present a shock hazard, and any modification to this product will void your
warranty.
• Do not attempt to service the unit yourself.
• Please refer any service to an authorized Amphony service center.
Copyright (C) 2014 Amphony. All rights reserved.
The information contained herein is subject to change without notice.
Revisions may be issued to advise of such changes and/or additions.
All product names, trade names, or corporate names mentioned in this
document are acknowledged to be the proprietary property of the
registered owners.
User and Installation Guide
Table des matières
Autres manuels Amphony Amplificateur
