AMC iLive 1 Manuel utilisateur
IMPORTANT SAFETY INSTRUCTIONS
When using this electronic device,
basic precautions should always be
taken, including the following:
1. Read all instructions before using the product.
2. Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, in a wet
basement or near a swimming pool etc).
3. Use this device when you are sure thatmicrophone receiverhas a stable base and it is fixed securely.
4. This product, in combination with loudspeakers and amplifier may be capable of producing
sound levels that could cause permanent hearing loss. Do not operate for a long period of
time at a high volume level or at a level that is uncomfortable. If you experience any hearing
loss or ringing in the ears, you should consult with otorhinolaryngologists.
5. The product should be located away from heat sources such as radiators, heat vents, or other
devices that produce heat.
6. The product should be connected to a power supply that is described in the operating
instructions or are marked on the product.
7. The power supply should be undamaged and never share an outlet or extension cord with
other devices. Never leave device plugged into the outlet when it is not being used for a long
period of time.
8. Care should be taken that objects do not fall into liquids and liquids would not be spilled on
the device.
9. The product should be serviced by qualified service personnel if:
The power supply or the plug has been damaged.
Objects have fallen into or liquid has been spilled on the product.
The product has been exposed to rain.
The product has been dropped or the enclosure damaged.
10.There are some areas with high voltage inside, to reduce the risk of electric shock do not remove cover of
the microphone receiver or power supply. The cover should be removed by the qualified personnel
only.
No user serviceable parts inside.
CONTENTS:
Before you start
Introductions 4
Features 4
Operation
Front panel 5
Rear panel 5
Handheld microphone 6
Body pack transmitter 6
Receiver operation 7
Handheld microphone operation 7
Body pack transmitter operation 8
Synchronization 8
Receiver’s menu 9
Specifications
General specifications 14
Introduction
True diversity wireless microphone systems with 32 selectable channels and automatic channel
targeting. iLive1 wireless microphones sets are combined with handheld or body pack transmitter with
variety of microphone selection to use with body pack.
Features
True diversity receiver
32 selectable channels
Automatic channel targeting ACT synchronization
ASF automatic frequency selection
High brightness LCD display
RF, AF level meter
Battery level meter
Digital volume and squelch control
Lock menu function
Handheld microphone with LCD display
RF power selector for battery life saving mode or working distance range increase
Excellent quality metal body microphone equipped with dynamic cardioid capsule
Body pack transmitter with LCD display, channel, frequency and low battery indications
Balanced XLR connector and unbalanced 6,3mm TS jack connector outputs. Jack/Jack cable included
Front Panel
1. SYNC button
2. Navigation buttons
3. SET button
4. LCD display
5. IR transmitter
6. Power switch
Rear Panel
1. Antenna A connector
2. Audio output 3. Main power connector
4. Antenna B connector
Handheld microphone
1. LCD display
2. IR receiver
3. Power button
4. Battery holder
5. Battery cover
Body pack
1. Antenna
2. LCD display
3. IR receiver
4. Battery cover lock
5. Battery holder
6. Battery cover
7. Power button
8. Microphone connector
Receiver operation
SYNC BUTTON
Press this button to transmit data from receiver to transmitter in order to synchronize microphone or
body pack transmitter and receiver.
NAVIGATION BUTTONS
These buttons are designed to navigate receivers menu and adjust settings.
SET BUTTON
Short press of this button shows number of current channel for two seconds on LCD screen if channel
frequency are displayed for default and otherwise, shows the channel frequency if channel number are
set for display default. Long press brings menu on the screen, in order to enter the submenu press SET
button one more time. Use navigation buttons to navigate menu or adjust settings.
LCD DISPLAY
Displays the current settings, menu and other information, like transmitter’s battery level, RF level, AF
level, volume, frequency or channel, lock status, mute status and which antenna A or B is active at the
moment.
IR TRANSMITER
IR transmitter allows synchronize microphone or body pack and receiver by establishing handheld
microphone or body pack radio frequency to the same as the receiver.
POWER SWITCH
Press power switch for 3 seconds to turn on/off the power.
ANTENNA CONNECTOR
This connector designed to connect antenna to the receiver.
AUDIO OUTPUT
Balanced XLR and unbalanced 6,3mm Jack audio output.
MAIN POWER CONNECTOR
Connector for DC 12 V – 16 V 1.25A power supply.
Handheld microphone operation
LCD DISPLAY
Displays the current frequency, channel and transmitter’s battery level.
IR RECEIVER
IR receiver allows synchronizing microphone and receiver by establishing handheld microphone radio
frequency to the same as set in receiver.
POWER BUTTON
Press power button for 3 seconds to turn on/off the power.
BATTERY HOLDER
Battery holder for two pieces of AA sizes alkaline batteries. Pay attention to battery polarity, wrong
polarity can damage transmitter!
BATTERY COVER
Remove battery cover in order to insert or replays batteries.
Body pack transmitter operation
ANTENNA
Antennas for RF signal transmitting to the receiver. Covered antenna can reduce working distance, try to
keep antenna uncovered in order to guaranty maximum working distance.
LCD DISPLAY
Displays the current frequency, channel and low battery indication.
IR RECEIVER
IR receiver allows synchronize body pack and receiver by establishing body pack radio frequency to the
same as set in receiver.
BATTERY COVER LOCK
Push cover lock in order to remove battery cover.
BATTERY HOLDER
Battery holder for two pieces of AA sizes alkaline batteries. Pay attention to battery polarity, wrong
polarity can damage transmitter!
BATTERY COVER
Remove battery cover in order to insert or replays batteries.
POWER BUTTON
Press power button for 3 seconds to turn on/off the power.
MICROPHONE CONNECTOR
Four pin mini XLR connector to connect lavaliere or headset microphone.
Synchronizing
Press infrared data transfer button (SYNC) to transmit data from receiver to transmitter in order to
synchronize microphone and receiver radio frequency.
The distance between the devices should be proximally 20cm.
IMPORTANT: During synchronization IR receiver and IR transmitter should be directed to each other.
ASF FUNTION
To activate ASF (auto frequency selection) press the navigation button for 3 sec. This function will find free
channel in frequency range, it helps more easily synchronize transmitter and receiver. After ASF functions
finds the free channel, please use SYNC button to synchronize receiver and transmitter.
Receiver’s menu
Long press of SET button brings main menu on the screen, in order to enter the submenu press SET button
one more time. Use navigation buttons to navigate menu and adjust settings.
DISPLAY MENU
Display menu allows to change the default screen view from frequency to channel and otherwise. Select
“CHANNL” to display channel number in the screen or select “FREQUE” to display channel frequency in Mhz.
TUNE MENU
Select tune menu in order to change receiver’s frequency in 50 kHz steps manually. If receiver is set to
TUNE mode - AFS functions is disabled. In order to activate AFS, CHANNL mode should be selected in main
menu.
Table des matières
Autres manuels AMC Système de microphone
Manuels Système de microphone populaires d'autres marques
Sennheiser
Sennheiser Evolution Wireless Digital EW-DX EM 2 Manuel utilisateur
Alpha Technologies
Alpha Technologies RBMS Manuel utilisateur
SWIT Electronics Co.,LTD.
SWIT Electronics Co.,LTD. CW-S150 Manuel utilisateur
Shure
Shure UA844 Manuel utilisateur
Panasonic
Panasonic SHFX70 - DVD HOME THEATER WIRELESS SYSTEM Manuel utilisateur
Pyle
Pyle PDWM5000 Manuel utilisateur