ALZA Insta360 GO 2 Manuel utilisateur

Insta360 GO 2

User Manual • Uživatelský manuál •

Užívateľský manuál • Használati utasítás •

Benutzerhandbuch

Dear customer,

Thank you for purchasing our product. Please read the following instructions carefully

before first use and keep this user manual for future reference. Pay particular attention

to the safety instructions. If you have any questions or comments about the device,

please contact the customer line.

✉www.alza.co.uk/kontakt

✆+44 (0)203 514 4411

Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Names of Parts

GO 2

Charging Case

Lens

Status

Indicator

Action

Button

Charging

Points

Microphone

Type

-C Charging Port

1/4“ Mounting Point

Charging Points

Screen

Record Button

Mode

Button

Status

Indicator

(Opened charging case)

Charging

Before use, make sure that your GO 2 and its charging case are fully charged.

Place GO 2 into the charging case to charge it.

Connect the included charging cable to the charging case to

charge it.

To take out GO 2:

As shown below, use your thumb to

gently take GO 2 out from the top.

Connect to a

5V 2A power

adapter.

Downloading the App & Activating

Step 1

Scan the QR code (https://www.insta360.com/download/insta360-go2) or search

“Insta360” in the App Store or any other Android app store to download the Insta360

app.

Step 2

Turn on your mobile device’s Wi-Fi. Then long press the Action Button for 1 second to

power on GO 2.

Step 3

Open the Insta360 app, tap the camera icon at the bottom of the app homepage, swipe

until you see GO 2 and tap “Connect Now”. Select the device you want to connect to and

follow the onscreen instructions to complete the connection. The name of your camera

is “GO 2 * * * * * *” by default, where * * * * * * is the last six digits of the serial number

on the box your GO 2 came in. The first time you connect to GO 2, please single

press its Action Button to confirm your connection.

Step 4

After successfully connecting the camera, follow the app prompts to activate your

camera. The app will prompt you to update the firmware if there is a new version

available. Please follow the on-screen prompts to update the firmware of GO 2 and the

charging case.

Shooting

Refer to the “Button Instructions” card included in the box for instructions on how to

use GO 2’s Action Button and charging case buttons. You can customize the Action

Button’s basic functions to your preference in the app. For more product information

visit: https://www.insta360.com/support/product-support

Previewing via the App

After shooting, connect your GO 2 to the Insta360 app and go to the Album page to view

your clips. You can also take photos or videos via the app and preview your shot in real-

time.

Note: As system files and cache take up some memory, the actual available storage

space will be slightly less than the total memory.

Mounting GO 2

Magnet Pendant

The Magnet Pendant should be worn underneath your shirt with the diagram facing out.

Place GO 2 over your shirt so it snaps on.

Easy Clip

(Place GO 2 into the Easy Clip so it snaps into place. Rotate the camera frame to adjust

the shooting angle. It is suggested to adjust the angle slightly downward.)

Pivot Stand: Attaching to a Flat Surface

Slide the Pivot Stand base’s cover down to remove it, then stick the Pivot Stand onto a

clean and flat surface.

Pivot Stand: Handheld Use (For underwater use)

Rotate the camera frame out 180° and then hold the Pivot Stand’s base to shoot.

Notes

Accessories

•GO 2 and its accessories contain small objects. Keep them out of children’s reach to

prevent swallowing.

•Avoid using all accessories in high-speed or high-intensity environments, otherwise

your camera or accessories may fall off.

•As thick clothing can weaken the magnetic force of the Magnet Pedant, please do

not use GO 2 with thick clothing and always test GO 2’s stability before shooting.

•If you wear a cardiac pacemaker, do not wear the Magnet Pendant.

•When using the Pivot Stand, please attach it to dry, clean and flat surfaces only.

Avoid attaching it to surfaces with strong vibrations.

•Peel the Pivot Stand off surfaces from the edge of the base. Do not pull it off from

the center.

•If the Pivot Stand has lost stickiness, clean with water and dry for re-use. After use,

place its original cover back on. Avoid sticking the Pivot Stand in high or low

temperature environments.

Updating the firmware:

•Before use, please update the firmware of GO 2 and its charging case.

•Before updating, ensure that both GO 2 and the charging case’s remaining power is

not less than 50 %.

•How to update via your computer (U-disk mode):

Step 1: Download the latest firmware from Insta360’s official website.

Step 2: Use the included charging cable to connect the charging case (with GO 2

placed within) to your computer. Make sure both GO 2 and the charging case are

powered on.

Step 3: Copy the “InstaGo2FW.pkg” file you have downloaded to your GO 2 directly.

Delete the old “pkg” file first if there is one.

Step 4: Disconnect the charging case from your computer and GO 2 will power off

automatically. Close the charging case and open it again, then GO 2 will power on

automatically and start updating the firmware with a slow-flashing cyan light. After

finishing GO 2’s firmware update, the charging case will start to update its firmware

as well. Please keep the charging case open.

•For more information on updating the firmware, visit:

https://onlinemanual.insta360.com/go2/en-us/camera/firmware

To exit U-disk mode, please eject the device from your computer before unplugging

the charging cable.

Indicator status

Camera / charging case Status

Camera/ charging case’s indicator

Camera / charging case is powering on

Solid Blue

Camera / charging case (with GO 2

connected) is in standby mode

Solid cyan

Camera / charging case is off and charging

Solid red

Camera is off and fully charged

Indicator off

Charging case is off and fully charged

Solid green

Camera / charging case is recording

White light slowly flashes

Camera / charging case is in U-disk mode

Blue light rapidly flashes

Camera / charging case is updating

firmware

Cyan light slowly flashes

Error Notices

Storage error

Blue light rapidly flashes

GO 2 needs to cool down

Yellow light rapidly flashes when it’s on

Red light rapidly flashes when it’s off

Bluetooth control via charging case

•By default, your GO 2 and the included charging case are automatically paired via

Bluetooth. When you open the charging case, it will power on automatically and

connect to the paired GO 2. Once your GO 2 and charging case are powered on, you

can control GO 2 via the charging case.

•If you purchase a GO 2 or charging case separately, place your GO 2 into the

charging case and power them on. They will automatically pair via Bluetooth.

•The effective Wi-Fi connection range and Bluetooth range is 33 feet (10 meters) in

optimal conditions.

Taking care of your camera

•Store the product in a dry, clean, and dust-free environment.

•Keep corrosive chemicals, liquids, and heat sources away from the product to

prevent damage.

•Use only a soft, dry cloth to clean the product.

•The fault may be caused by a fall or the impact of an external force.

•Do not attempt to disassemble the product. Otherwise, the warranty expires.

•If a malfunction occurs, have the product inspected or adjusted by an authorized

technician.

•Failure to follow all instructions may result in damage.

•The warranty does not cover the buyer's doubts.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you

need repair or other services during the warranty period, contact the product seller

directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for

which the claimed claim may not be recognized:

•Using the product for any purpose other than that for which the product is intended

or failing to follow the instructions for maintenance, operation and service of the

product.

•Damage to the product by a natural disaster, the intervention of an unauthorized

person or mechanically through the fault of the buyer (e.g. during transport, cleaning

by inappropriate means, etc.).

•Natural wear and aging of consumables or components during use (such as

batteries, etc.).

•Exposure to adverse external influences, such as sunlight and other radiation or

electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,

electrostatic discharge voltage (including lightning), faulty supply or input voltage and

inappropriate polarity of this voltage, chemical processes such as used power

supplies, etc.

•If anyone has made modifications, modifications, alterations to the design or

adaptation to change or extend the functions of the product compared to the

purchased design or use of non-original components.

Table des matières

Langues :

Autres manuels ALZA Caméra d'action

ALZA

ALZA Insta360 ONE R Manuel utilisateur

Manuels Caméra d'action populaires d'autres marques

Epic

Epic STC-EPC1T Manuel utilisateur

Brinno

Brinno MAC200 DN Manuel utilisateur

GoPro

GoPro HERO5 Manuel utilisateur

ION

ION Air Pro 2 Manuel utilisateur

Firefly

Firefly 6s Manuel utilisateur

Omni

Omni HERO4 Manuel utilisateur

nedis

nedis ACAM41BK Manuel utilisateur

MOFILY

MOFILY YOCAM Manuel utilisateur

ZERO-X

ZERO-X ZX-10 Manuel utilisateur

Pyle

Pyle eXpo PSCHD90 Manuel utilisateur

Action Camera

Action Camera AC32 Manuel utilisateur

Midland

Midland XTC300 Manuel utilisateur

Movii

Movii QC-8075 Manuel utilisateur

Coleman

Coleman C5WP Xtreme Manuel utilisateur

MCM Electronics

MCM Electronics 82-19749 Manuel utilisateur

Aim

Aim SmartyCam 3 Sport Manuel utilisateur

Naxa

Naxa NDC-409 Manuel utilisateur

Panasonic

Panasonic HX-A1M Manuel utilisateur