Altronix TROVE T1RAL3F8 Manuel utilisateur

Rev. T1RAL111518

T1RAL3F8

8 Door Kit with Fused Outputs

Fully assembled kit includes:

- Trove1R rack enclosure with Altronix backplane (TAL1R)

- (1) eFlow6NB - Power Supply/Charger

- (1) VR6 - Voltage Regulator

- (1) PDS8 - Fused Dual Output Power Distribution Module

- (1) ACMS8 - Fused Dual Output Access Power Controller

T1RAL33F16

16 Door Kit with Fused Outputs

Fully assembled kit includes:

- Trove1R rack enclosure with Altronix backplane (TAL1R)

- (2) eFlow6NB - Power Supply/Chargers

- (2) ACMS8 - Fused Dual Output Access Power Controllers

Installation Guide

All registered trademarks are property of their respective owners. More than just power.™

Installing Company: _____________________ Service Rep. Name: __________________________________________

Address: ________________________________________________________ Phone #: _________________________

Access & Power Integration

- 2 - Trove1RAL Series

Overview:

Altronix Trove Rack kits are pre-assembled and consist of Trove1AL1R enclosure/backplane with factory installed Altronix power supply/

charger(s) and sub-assemblies.

Configuration Chart:

Altronix

Model

Number

120VAC

60Hz

Input

Current

(A)

Power

Supply

Board

Input

Fuse

Rating

Power

Supply

Board

Battery

Fuse

Rating

Nominal DC

Output Voltage

Maximum Supply

Current for Main

and Aux. Outputs

on Power Supply

board and ACMS8

Access Power

Controllers’ outputs

Fail-Safe/

Fail-Secure

or Dry Form

“C” Outputs

Current

Per

ACMS8

Output

(A)

ACMS8

Board

Input

Fuse

Rating

ACMS8

Board

Output

Fuse

Rating

PDS8

Board

Input

Fuse

Rating

PDS8

Board

Output

Fuse

Rating

[DC] [Aux]

Output

Range

(VDC)

Output

Range

(VDC)

T1RAL3F8 3.5 5A/

250V

10A/

32V

20.19-

26.4

20.19-

26.4 24VDC @ 5.6A 8 2.5 15A/

32V

3A/

32V

10A/

32V

3A/

32V

T1RAL33F16 75A/

250V

10A/

32V

Power Supply 1 (24VDC)

16 2.5 15A/

32V

3A/

32V – –

20.19-

26.4

20.19-

26.4 24VDC @ 5.6A

Power Supply 2 (12VDC)

10.0-

13.2

10.1-

13.2 12VDC @ 5.3A

Specifications:

Agency Listings:

• CE European Conformity.

Mechanical:

• Black enclosure with ample knockouts for convenient access.

• Includes: tamper switch, cam lock and mounting hardware.

• Modular 2U standard EIA 19” drawer with

extendable slides up to 48”.

• Dimensions (H x W x D): 3.25” x 19.0” x 26.5”

(82.6mm x 482.6mm x 673.1mm).

Included Accessories:

• One (1) tamper switch (Altronix Model TS112 or equivalent).

• Cam lock.

Available Accessories (not included):

• RE2: Rack Mount Battery Enclosure

accommodates up to four (4) 12VDC/7AH batteries.

• WM5, WM25, WM100: Magnetic Cable Tie Mounts

(5, 25, 100 counts).

Trove1RAL Series - 3 -

Assembling and Attaching Z Bracket Wire Management Accessory (included):

Altronix Trove Rack enclosures include Z Bracket, a convenient and reliable wire management accessory.

1. Carefully unpack Z Bracket. Do not discard hardware (included) (Fig. 1, pg. 3).

2. Attach arms to each other using bolts and lock nuts (Fig. 1a, pg. 3).

3. Attach the hinge brackets to the ends of arms using bolts and nuts positioning them as shown on Fig. 1b, pg. 3.

4. Make sure that all nuts are tightened.

Fig. 2

Fig. 2a

5. Attach the hinge bracket on the longer side of Z Bracket to the adjustable rail using bolts and lock nuts (included) (Fig. 2, 2a, pg. 3).

6. Attach the hinge bracket on the shorter side of Z Bracket to the rear of the rack enclosure using bolts (included).

Hardware (included):

Ten (10) bolts and eight (8) lock nuts

Two (2)

Fig. 1

Fig. 1b

Fig. 1a

- 4 - Trove1RAL Series

Installation Instructions for Altronix Trove Rack Kits:

Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local codes and authorities having

jurisdiction. Product is intended for indoor use only.

1. Remove backplane from enclosure prior to installing into rack cabinet (do not discard hardware).

2. In order to mount included UL Listed tamper switch (Altronix Model TS112 or equivalent) turn the enclosure upside down.

Punch out the knockout in designated location, on the back of the unit, from outside of the drawer (Fig. 3, pg. 4).

Insert the tamper switch into the knockout from outside of the drawer with the button facing outwards and spaded connectors

inside the drawer. Connect tamper switch wiring to the Access Control Panel input or the appropriate UL Listed reporting device.

To activate alarm signal open the rack drawer.

3. Slide the rack enclosure into an open 2U location in the four post rack cabinet.

4. Utilizing proper fasteners attach front ears to the rack rails.

5. Attach the rear of the adjustable slides to the rear rails of the rack cabinet with the proper fasteners.

6. Ensure that all internal cofigurations (voltage selection, switch settings, etc.) are completed before mounting backplane back into

Trove rack enclosure.

7. Refer to the eFlow Power Supply/Charger Installation Guide for eFlow6NB and corresponding sub-assembly Installation Guides for

the following models: ACMS8, PDS8, VR6 for further instructions.

Fig. 3

Tamper Switch mounting location

Back of the drawer,

viewed from outside.

Trove1RAL Series - 5 -

T1RAL3F8 Configuration

Fig. 4

L G N

DCAC1 1 min

enable

2 hr.

disable

OFF - 24V

ON - 12V

TRIGGER EOL

SUPERVISED

--- BAT + --- DC +

NC C NO

AC FAIL

NC C NO

BAT FAIL + AUX ---

NO GND

RESET

Altronix - eFlow6NB

24VDC

Altronix - VR6/PDS8

OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 OUT7 OUT8

1 2 3 4 5 6 7 8

Common Power Outputs (NEG)

+ INP1 - + INP2 -

PDS8

Dual Voltage

Power Distribution

Module

PWR2+ PWR2+

COM -

Fuse1

Fuse2 Fuse3 Fuse4 Fuse5 Fuse6 Fuse7 Fuse8

IN1 Fuse

IN2 Fuse

PWR1+ PWR1+

OUT1

RISK OF FIRE REPLACE FUSES WITH SAME TYPE AND RATING

OUT2

OUT3

OUT4

OUT5

OUT6

OUT7

OUT8

PWR1+

PWR1

PWR1<-- >PWR2

INP Logic

NO <-- >NC

FACP

EN <-- >DIS FACP

FACP

EOL JMP

PWR2+

Power 2

Power 1

+INP2--+INP1-- +INP3-- +INP4-- +INP5-- +INP6-- +INP7-- +INP8--

ACMS8

ACMS8CB

PWR1+

PWR2+

COM--

ONON

PWR2

OFF

+PWR1-- +PWR2--

NC RST EOL +F +R

C GND GND -F -R

NO C NC COM NO C NC COM

Output 1Output 2

NO C NC COM NO C NC COM

Output 3 Output 4

NO C NC COM NO C NC COM

Output 5 Output 6

NO C NC COM NO C NC COM

Output 7 Output 8

Altronix - ACMS8

To IEC connector

- 6 - Trove1RAL Series

T1RAL33F16 Configuration

Fig. 5

Altronix - eFlow6NB

24VDC

L G N

DCAC1 1 min

enable

2 hr.

disable

OFF - 24V

ON - 12V

TRIGGER EOL

SUPERVISED

--- BAT + --- DC +

NC C NO

AC FAIL

NC C NO

BAT FAIL + AUX ---

NO GND

RESET

Altronix - eFlow6NB

12VDC

L G N

DCAC1 1 min

enable

2 hr.

disable

OFF - 24V

ON - 12V

TRIGGER EOL

SUPERVISED

--- BAT + --- DC +

NC C NO

AC FAIL

NC C NO

BAT FAIL + AUX ---

NO GND

RESET

OUT1

RISK OF FIRE REPLACE FUSES WITH SAME TYPE AND RATING

OUT2

OUT3

OUT4

OUT5

OUT6

OUT7

OUT8

PWR1+

PWR1

PWR1<-- >PWR2

INP Logic

NO <-- >NC

FACP

EN <-- >DIS FACP

FACP

EOL JMP

PWR2+

Power 2

Power 1

+INP2--+INP1-- +INP3-- +INP4-- +INP5-- +INP6-- +INP7-- +INP8--

ACMS8

ACMS8CB

PWR1+

PWR2+

COM--

ONON

PWR2

OFF

+PWR1-- +PWR2--

NC RST EOL +F +R

C GND GND -F -R

NO C NC COM NO C NC COM

Output 1Output 2

NO C NC COM NO C NC COM

Output 3 Output 4

NO C NC COM NO C NC COM

Output 5Output 6

NO C NC COM NO C NC COM

Output 7 Output 8

OUT1

RISK OF FIRE REPLACE FUSES WITH SAME TYPE AND RATING

OUT2

OUT3

OUT4

OUT5

OUT6

OUT7

OUT8

PWR1+

PWR1

PWR1<-- >PWR2

INP Logic

NO <-- >NC

FACP

EN <-- >DIS FACP

FACP

EOL JMP

PWR2+

Power 2

Power 1

+INP2--+INP1-- +INP3-- +INP4-- +INP5-- +INP6-- +INP7-- +INP8--

ACMS8

ACMS8CB

PWR1+

PWR2+

COM--

ONON

PWR2

OFF

+PWR1-- +PWR2--

NC RST EOL +F +R

C GND GND -F -R

NO C NC COM NO C NC COM

Output 1Output 2

NO C NC COM NO C NC COM

Output 3 Output 4

NO C NC COM NO C NC COM

Output 5 Output 6

NO C NC COM NO C NC COM

Output 7 Output 8

To IEC connector

Altronix - ACMS8

Trove1RAL Series - 7 -

Notes:

- 8 - Trove1RAL Series

Trove1R Enclosure Dimensions (H x W x D):

3.25” x 19.0” x 26.5” (82.6mm x 482.6mm x 673.1mm). Shown with Z Bracket attached.

3.25”

82.3mm

26.5”

673.1mm

19” (482.6mm)

2.4”

61mm

4.57”

116.1mm

11.175” (283.8mm)

R 1.27” (32.3mm)

1” (25.4mm)

0.55” (14mm)

3.62”

92mm

0.1”

2.5mm

1.5”

38.1mm

Altronix is not responsible for any typographical errors.

140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056

web site: www.altronix.com | e-mail: [email protected] | Made in U.S.A.

IITrove1RAL Series J12T

MEMBER

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Altronix Alimentation

Altronix

Altronix AL600ULADA Manuel utilisateur

Altronix

Altronix TROVE DMP 734 Manuel utilisateur

Altronix

Altronix eFlow3NB Manuel utilisateur

Altronix

Altronix Trove T1SAK3F4 Manuel utilisateur

Altronix

Altronix SMP5 Manuel utilisateur

Altronix

Altronix Trove1V1 Manuel utilisateur

Altronix

Altronix OLS120D2X Manuel utilisateur

Altronix

Altronix AL600ULX Series Manuel utilisateur

Altronix

Altronix AL400ULPD8CB Manuel utilisateur

Altronix

Altronix LPS3AC Manuel de service

Altronix

Altronix T2428300E Manuel utilisateur

Altronix

Altronix VB6 Manuel de service

Altronix

Altronix ALTV2432220 Series Manuel utilisateur

Altronix

Altronix FireSwitch 108 Manuel utilisateur

Altronix

Altronix R615DC8CB220 Manuel utilisateur

Altronix

Altronix Vertiline8C Manuel utilisateur

Altronix

Altronix SMP7 Manuel utilisateur

Altronix

Altronix eFlowNBV Series Manuel utilisateur

Altronix

Altronix SMP10C12X Series Manuel utilisateur

Altronix

Altronix WayPoint562 Manuel utilisateur

Altronix

Altronix AL175UL Manuel utilisateur

Altronix

Altronix ALTV2416350 Manuel utilisateur

Altronix

Altronix SMPWP Series Manuel utilisateur

Altronix

Altronix ALTV2416UL3 Series Manuel utilisateur

Manuels Alimentation populaires d'autres marques

Monacor

Monacor PS-12CCD Manuel utilisateur

VOLTIMA

VOLTIMA MagicBox 15 Manuel utilisateur

Agilent Technologies

Agilent Technologies 6032A Manuel utilisateur

Miller

Miller Auto Deltaweld 452 Manuel utilisateur

BCP

BCP PUOUBK Feuille d'instructions

HC 2210 Manuel utilisateur

Puls

Puls CT5.241 Manuel utilisateur

OCZ

OCZ ZX1250W Manuel utilisateur

iseg

iseg ECH 238 Manuel utilisateur

Power

Power XXL A Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 6631B Manuel utilisateur

Renogy

Renogy PHOENIX 300 Manuel utilisateur

HP 6200B Manuel de service

Epson

Epson Stylus Scan 2500 Manuel d'utilisation

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Manuel utilisateur

Puls

Puls MiniLine ML50.100 Manuel utilisateur

Puls

Puls AS-Interface SLA4.100 Manuel utilisateur

Kenwood

Kenwood PS-60 Manuel utilisateur