IL514CM800/CM900Emergency Call SystemManual • Page7
Copyright©TekToneSound& Signal Mfg.,Inc.AllRights Reserved.
SystemOperatingInstructions
System operators must read the following operating
instructions concerning system equipment and terms used in
conjunction with the equipment.
CM800, CM900 Annunciators
Answer Emergency Calls: Emergency calls are indicated by
simultaneous operation of the following signals:
• Steady illumination of the associated station selector
lamp,whichismarkedtoindicatecallorigin.
• Rapidly pulsating audible tone. The audible call signal
may be canceled by pressing the tone-off button. The
tone-off light will illuminate to indicate that tone is
silenced. Thetone-offbuttonmaybepressedatanytime
to verify operation of the tone-off lamp.
Callsignals may only be canceled at the point of origin,and
all calls must be answered in person.
TestStationAnnunciatorLamp(ifsoequipped):Onelamptest
button is provided on each panel of annunciator lamps.
Press the lamp test button—all annunciator lamps on that
panel should be illuminated.
ImproperOperation:IftheCM800orCM900Annunciatorfails
to operate as described, contact qualified maintenance
personnel.Ifa malfunctionoccursduringacall-in,causing
alackofindicationof call origin onthemasterstation,first
determinetheoriginofthecallbyobservingwhichcorridor
lightisilluminated,andtheninformqualified personnel.
SF117-, SF118-series Emergency Call Stations
Place an Emergency Call: Pull the call cord and wait for an
Attendant. (Note: The SF118 series station has a red call-
placed light that illuminates when the cord is pulled.)
Reset the Station: Push the slide switch up.
Improper Operation: If the station does not operate as de-
scribed, contact qualified personnel. There are no user
serviceable parts on SF117 series and SF118 series Emer-
gency Call Stations.
SF154 Emergency Call Station
Place an Emergency Call: Press the switch in so that the red
area of the switch is visible, and wait for an Attendant.
Reset the Station: Press the switch out so that the red area of
the switch is not visible.
Improper Operation: If the station does not operate as de-
scribed, contact qualified personnel. There are no user
serviceablepartsontheSF154EmergencyCallStation.
IR019, IR019B Remote Annunciator Tone Speakers
Emergency Calls: Emergency calls are indicated by a rapidly
pulsating audible tone. The audible tone signal can be
silenced by pressing the tone-off switch. (The IR019 is not
equippedwithatone-offlight.)TheIR019andIR019Btone
mimics the annunciator tone—either steady or pulsing.
Improper Operation: If the speaker does not operate as de-
scribed, contact qualified personnel. There are no user
serviceablepartsontheIR019andIR019BRemoteAnnun-
ciator Tone Speakers.
LI381 Corridor Light
Emergency Calls: Emergency calls are indicated by steady
illuminationofthecorridorlightassociatedwiththecalling
station.
Improper Operation: If the corridor light does not operate as
described,contactqualifiedservicepersonnel.Thereareno
userserviceablepartsontheLI381CorridorLight,otherthan
bulbs.
LI382, LI382LED Corridor Lights
Emergency Calls: Emergency calls are indicated by steady
illuminationofthecorridorlightassociatedwiththecalling
station. The second light can be used for other call types
initiatedfromthesamezone.
Improper Operation: If the corridor light does not operate as
described,contactqualifiedservicepersonnel.Thereareno
userserviceablepartsontheLI382CorridorLight,otherthan
bulbs.TherearenouserserviceablepartsontheLI382LED
CorridorLight.
LI118B, LI123B Corridor Lights
Emergency Calls: Emergency calls are indicated by steady
illumination of the corridor light and a steady buzzer.
Improper Operation: If the corridor light does not operate as
described,contactqualifiedservicepersonnel.Thereareno
user serviceable parts on the LI118 and LI123B Corridor
Lights, other than bulbs.
BE005, BE007 Corridor Bells
Emergency Calls: Emergency calls are indicated by a steady
ringing of the corridor bells.
Improper Operation: If the corridor bell does not operate as
described,contactqualifiedservicepersonnel.Thereareno
user serviceable parts on the BE005 and BE007 Corridor
Bells.
