9
Settings
Sensor Light
Enable or disable the light of the device, when the door is
opened/closed.
Firmware Update
Update the rmware of Shelly, when a new version is released.
Time Zone and Geo-location
Enable or Disable the automatic detection of Time Zone and
Geo-location.
Factory Reset
Return Shelly to its factory default settings.
Device Information
• Device ID - Unique ID of Shelly
• Device IP - The IP of Shelly in your Wi-Fi network
Edit Device
From here you can edit device name, room and picture. When
you are done, press Save Device.
THE EMBEDDED WEB INTERFACE
Even without the mobile app Shelly can be set and controlled
through a browser and connection of a mobile phone or tablet.
Abbreviations used:
• Shelly ID – consists of 6 or more characters. It may include
numbers and letters, for example 35FA58.
• SSID – the name of the WiFi network, created by the device,
for example ShellyDW-35FA58.
• Access Point (AP) – in this mode in Shelly creates its own
WiFi network.
• Client Mode (CM) – in this mode in Shelly connects to an-
other WiFi network.
Installation/Initial inclusion
Step 1
Place your Shelly D/W sensor in the room where you want to
use it. Press the Button - the LED should turn on and
ash slowly.
WARNING: If the LED does not ash slowly, press and hold
the Button for at least 10 seconds. The LED should then ash
quickly. If not, please repeat or contact our customer support at:
support@shelly.cloud
