Allied Telesis AT-MCF2000 Manuel utilisateur
Datasheet | Media Converters
AT-MCF2000
Multi-channel 2 slot modular chassis
AT-MCF2300
Multi-channel 4 slot modular chassis
AT-MCF2000M
Management module
AT-MCF2000S
Slave module
AT-MCF2012LC
12 channel 10/100TX Fast Ethernet to
100FX (LC) 2km multi-mode fiber module
AT-MCF2012LC/1
12 channel 10/100TX Fast Ethernet to
100FX (LC) 15km single-mode fiber module
Overview
The AT-MCF2xxx multi-channel modular media
chassis is a high performance, highly available,
high channel density media device. Designed for
maximum reliability, the fan modules, power
supplies and the management module can all be
hot removed and inserted without any
interruption to traffic flow on any of the blades.
Up to two media blades can be inserted into
the AT-MCF2000 chassis and up to four media
blades into the AT
-MCF2300 chassis, providing a
scalable ‘pay-as-you-grow’ architecture.This is
further extended by stacking multiple chassis,
with one management module controlling a
complete stack, or with two management
modules, with the second providing redundant
management*.
Extend the Distance of Ethernet
The primary function of the AT-MCF2xxx multi-
channel modular media chassis is to extend the
distance of Fast Ethernet and Gigabit Ethernet*
networks. Standard Twisted Pair Cat 5/6 copper
cabled Ethernet networks have a maximum
operating distance of 100 meters (328 feet).
Depending on the media blade model, the
blades operate over both multi-mode or single-
mode fiber at distances up to 15km in either
half or full-duplex operation.
The AT-MCF2012LC is a 12 channel multi-mode
fiber blade with small form factor LC style
connectors, with a maximum fiber operating
distance of 2km (1.24 miles).
The AT-MCF2012LC/1 is a 12 channel single-
mode fiber blade with small form factor LC
style connectors, with a maximum fiber
operating distance of 15km (9.32 miles).
Flexible Management
Cost conscious and security conscious network
administrators may choose to implement an
unmanaged network using the AT-MCF2xxx.
With no management module installed in the
chassis, each port on a blade can be locally
configured using a ‘jog’ button located on the
front panel of the blade.This allows each port
to be independentlyconfigured to operate in
Link, MissingLinkTM, or Smart MissingLinkTM
modes.
Installing a management module into the chassis
allows the chassis to be configured and
monitored via a local RS232 port, or through
the 10/100/1000T interface for Telnet or SNMP.
For security reasons, each management mode
can be individually disabled. In Telnet mode, up
to 10 user password protected accounts can be
configured, each with multiple management
privileges ranging from read only to supervisor
access.
The installation of a management module allows
the network administrator to configure all the
ports on each media blade, without having to
use the ‘jog’ button.
Key Features
•2and 4 slots modular media converter chassis
•High density media blades
•Supports up to 24 channels in 1RUrack space
•Managed and unmanaged operation
•SNMP,Telnet and RS232 management
•Hot-swappable blades, power supplies and
management modules
•Stackable architecture allows one management
module to control multiple chassis
•Stackable architectureproviding redundant
management*
•Multiple user level management privileges
•Management module replacement without
channel traffic interruption
•Simple field maintenance
•Blades supportMissingLinkTM and Smart
MissingLinkTM
•Blades support auto MDI/MDI-X
•Support for both single and multi-mode fiber
•Designed to support Fast Ethernet and Gigabit
Ethernet blades
•Designed for IEEE 802.3ah (EFM) support on
selected media blades
MCF2xxx SERIES
Multi-channel Modular Media Chassis
Allied T
elesis www.alliedtelesis.com
MCF2xxx SERIES |Fast Ethernet Media Converters
Allied T
elesis www.alliedtelesis.com
Network Resilience
Each chassis can be configured with either one, or
two power supply modules (AC) to provide
resilience against a power supply failure.The
management module monitors the state of each
power supply, and that of the cooling fans, and will
generate an alarm should any parameter fall
outside of normal operating conditions. With
redundant power supplies installed, a power
supply can be remove or re-inserted into the
chassis without interruption to the media blade
traffic.
The management module can also be hot
removed and inserted without disruption to the
media blade traffic.
Amedia blade can be removed or inserted into
the chassis without disruption to other media
blade traffic.
The design of the AT-MCF2xxx chassis allows for
multiple chassis’ to be stacked, allowing two
management modules to control multiple media
chassis’. In this mode, one management module
operates as a redundant Master, onlytaking over
control of the stack should the Master module fail.
Additionally, chassis’ can be fitted with the
AT-MCF2000S slave module, allowing multiple
chassis’ to be stacked together with either one or
two AT-MCF2000M management modules
controlling the entire stack. In this manner, up to
32 x AT-MCF2000 or 16 x AT-MCF2300 chassis’
can be stacked, or a mix of either with a
maximum of 64 blade slots.
Field Maintenance
The need to simplify field maintenance was a key
criteria in the design of the AT
-MCF2xxx. Each
management module is fitted with a memory card
slot, allowing network administrators to keep an
exact copyof the configuration information of a
chassis.The configuration information of the
chassis is stored not onlyin the management
module,but also on each blade.If a management
module fails, a replacement blade can be hot
installed into the chassis, and it can assume all the
configuration parametersof the failed unit.
Similarly, if a media blade fails, this can be hot
swapped with a replacement, and the replacement
will adopt the parameters of the failed unit.These
features ensure that an engineer sent to site can
quicklyand easily get a faulty chassis back to an
operational mode.
MissingLinkTM and Smart
MissingLink™ (SML)
The MissingLinkTM (ML) feature allows the ports
on the media converter blade to pass the ‘Link’
status of their connections to each other. When
the media converter detects a problem with one
of the ports, such as the loss of connection to a
node, it shuts down the connection to the other
port, thus notifying the node that the connection
has been lost.The Smart MissingLinkTM (SML)
feature provides the same function as
MissingLinkTM with one additional feature that
when a link is lost on a port, the Link LED of the
port which still has a valid connection to its end-
node starts to blink.These features allow network
administrators to quickly troubleshoot network
problems.
FutureProof Design
The AT-MCF2xxx chassis has been designed to
support a wide range of media blades, allowing an
installed chassis to be field upgraded as the
network grows. Planned blades include support
for IEEE 802.3ah ‘Ethernet in the First Mile’ as well
as high performance Gigabit blades.
Hassle Free Support
All Allied Telesis Ethernet media converter line
cards offer free technical support, ensuring
trouble-free installation.
MCF2xxx SERIES |Fast Ethernet Media Converters
Allied T
elesis www.alliedtelesis.com
Software Management Features
Active Controls
•Enable/disable RS232
•Enable/disable Telnet
•Enable/disable SNMP
•Configure/delete user accounts (up to 10)
•Configure/delete user passwords
•Reset management card
•Reset chassis
•Download/upload firmware via TFTP
•Download/upload config via TFTP
•Download/upload firmware via Xmodem
•Download/upload config via Xmodem
•Download/upload firmware via memory card
•Download/upload firmwarevia memorycard
•Download config to media blades
•Upload config from media blades
•IP address
•Subnet mask
•Gateway
•Set SNMP management addresses
•Chassis name
•Chassis location
•Set temperaturethreshold
•Set media blade name
•Set media blade port name
•Enable/disable port link
•Enable/disable port MissingLink
•Enable/disable port Smart MissingLink
•Enable/disable port auto-negotiation
•Enable/disable port full-duplex
•Enable/disable portauto MDI/MDI-X
•Enable primarymanagement master
Chassis Information
•Part number
•Serial number
•Revision
•User-defined identifier
•User-defined location
Blade/Port Module Information
•Media blade type
•Slot occupied
•Part number
•Serial number
•Configuration
•Revision
•Ports on module
•User-defined identifier
•User-defined port identifier
Blade/Port Module Status
•Diagnostic status
•Portlink status
•Portlink / MissingLink / Smart MissingLink
Status
•Portactivity
•Port auto-negotiation status
•Port duplex status
•Port auto MDI/MDI-X status
Events / Alarms / Traps
•Cold start
•Warm start
•Link up/down
•Blade insertion/removal
•Fan module insertion/removal
•Power supply module insertion/removal
•Stacking link Up/down
•Authenication failure
•Chassis reset
•Module reset
•Temperature threshold crossed
•Power supply failure
•Fan speed failure
•TFTP session open/close
•Xmodem session open/close
•Telnet session open/close
•Redundant management secondary up/down*
•Redundant management primary up/down*
*Future release
MCF2xxx SERIES |Fast Ethernet Media Converters
Allied T
elesis www.alliedtelesis.com
Technical Specifications
AT-MCF2000 Chassis
Physical Characteristics
Dimensions 44cm x 46cm x 4.4cm
(W x D x H) (17.3” x 18” x 1.7”)
Weight (No modules installed) 7Kg
(15.4lb)
Mounting 19” rack-mountable or desktop
hardware included
AT-MCF2000AC AC Power Module
Interfaces
1xOn/Off switch
1xIEC power inlet
Features/Functionality
2xexhaust fans
Electrical Characteristics
Input power 100~250V AC 50/60Hz
AT-MCF2300 Chassis
Physical Characteristics
Dimensions 44cm x 27.7cm x 12.9cm
(W x D x H) (17.3” x 10.89” x 5.07”)
Weight (No modules installed) 7.1Kg
(15.65lbs)
Mounting 19” rack-mountable or desktop
hardware included
AT-MCF2300AC AC Power Module
Interfaces
1xOn/Off switch
1xIEC power inlet
Features/Functionality
2xexhaust fans
Electrical Characteristics
Input power 100~250V AC 50/60Hz
AT-MCF2000M Management Module
Status Indicators
System Fault LEDs
Green Normal operation
Red Fault condition
Off No power
Power/Fan LED
(2 Off, slots A and B)
Green Normal
Amber Power supply fault
Amber Flashing Fan fault/stopped
Off No module present
Console Port LED
Green Connected
Flashing Activity
Off Not connected
Management Port LINK LED
Green Link
Flashing Activity
Off Not connected
Management Port DUPLEX LED
Green Full-duplex
Flashing Half-duplex with collisions
Off Half-duplex, no collisions
Management Port SPEED LED
Green 1000Mbps
Amber 100Mbps
Off 10Mbps
Stacking Port LINK LED
Green Link
Flashing Activity
Off Not connected
Compact Flash BUSY LED
Amber Busy
Off Idle
Interfaces
1x10/100/1000T RJ-45 (auto MDI/MDI-X)
management connection
1x10/100TX RJ-45 (auto MDI/MDI-X)
stacking connection
1xRJ-45 RS232 connection
1 x compact flash memoryslot
1xReset button
Management Interfaces
RS232
Telnet
SNMP v1, v2, v3
Features, Standards and
Conformance
RFC 1305 SNTPv3
Real time clock (battery backed-up)
Event log (2000 entries, last 1000 held in
non-volatile memory)
RFC 1395 Syslog
RFC 783/1350 TFTP
(Firmware and image upload/download)
RFC 916 Xmodem
(Firmware and image upload/download))
RFC 1157 SNMP
RFC 2571-5 SNMPv3
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1215 TRAP MIB
RFC 1573 Interface Group MIB
RFC 1643 Ethernet MIB
RFC 1573 Extended Interface MIB
RFC 854 Telnet
SSH V1 (Secure Telnet)
SSH V2 (Secure Telnet)
Watchdog timer
IEEE 802.3 10T Ethernet
IEEE 802.3ab 1000T
IEEE 802.3u 100TX Ethernet
IEEE 802.3x 10/100Mbps flow control
IEEE 802.3z 1000Mbps flow control
AT-MCF2012LC and
AT-MCF2012LC/1 12
Channel Fast Ethernet Media Blade
Status Indicators
Per Fiber Port
Link Green Link signal established
Off No link
Activity Green Data activity
Off No activity
Per Copper Port
Link Green Link signal established at 100Mbps
Amber Link signal established at 10Mbps
Off No link
Activity Green Data activity
Off No activity
Mode LEDs
Channel Green Channel selected
Select Off Channel not selected
Link Green Selected channel in link mode
Off
Missing Green Selected channel in MissingLink
Link mode
Off
SmartGreen Selected channel in SmartMissingLink
Missing mode
Link Off
CDC Green Copper port detect collision
(half-duplex mode)
Off
FDC Green Fiber port detect collision
(half-duplex mode)
Interfaces
12 x 10/100TX ports
12 x 100FX (LC) ports
1xjog button to select operational mode
Fiber Optic Parameters
System Operating Parameters
Temperature range: Operating:
0°C to 40°C
Non-operating:
-25°C to 70°C
Humidity range: Operating:
5% to 95% non-condensing
Non-operating:
5% to 95% non-condensing
Altitude: Operating:
4,000 meters (13,000 feet)
Non-operating:
4,000 meters (13,000 feet)
Standards and Conformance
EN55024
UL60950-1
CSA22.2 No.950
TUV (EN60950)
CE
FCC Class A
EN55022 Class A
EN55024 Class A
VCCI. Class A
C-TICK
Ordering Information
AT-MCF2000-00
Multi-channel media chassis, comprising of
1 x AT-MCF2000 chassis
1 x AT-MCF2000FAN Fan module for second
power supply slot
1 x AT-MCF2KPNL2 PSU slot blanking panel
2 x AT-MCF2KPNL1 media slot blanking panels
1 x AT-MCF2KPNL3 management slot blanking panel
1xRack-mount kit
AT-MCF2000AC
AC power module for AT-MCF2000 chassis including
4xpower cords (US, EU, UK, AU)
AT-MCF2300-00
Multi-channel media chassis, comprising of
1 x AT-MCF2300 chassis
1 x AT-MCF2300FAN rear fan module
2 x AT-MCF2KPNL2 PSU slot blanking panels
4 x AT-MCF2KPNL1 media slot blanking panels
1 x AT-MCF2KPNL3 management slot blanking panel
1xRack-mount kit
AT-MCF2300AC
AC power module for AT-MCF2300 chassis including
4xpower cords (US, EU, UK, AU)
AT-MCF2000M
Management module
AT-MCF2000S
Slave module
AT-MCF2012LC
12 channel Fast Ethernet media blade
12 x 100TX to 100FX (LC) 2km Multi-mode fiber
AT-MCF2012LC/1
12 channel Fast Ethernet media blade
12 x 100TX to 100FX (LC) 15km single-mode fiber
Associated Products
AT
-MCF2000FAN
Spare fan module, for use in single PSU powered
AT-MCF2000 chassis
AT
-MCF2300FAN
Spare fan module, for use in single PSU powered
AT-MCF2300 chassis
MCF2xxx SERIES |Fast Ethernet Media Converters
USA Headquarters |19800 North Creek Parkway |Suite 200 |Bothell |WA 98011 |USA |T: +1 800 424 4284 |F: +1 425 481 3895
European Headquarters |Via Motta 24 |6830 Chiasso |Switzerland |T: +41 91 69769.00 |F: +41 91 69769.11
Asia-Pacific Headquarters |11 T
ai Seng Link |Singapore |534182 |T: +65 6383 3832 |F: +65 6383 3830
www.alliedtelesis.com
©2007 Allied T
elesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-000209 Rev E
AT-MCF2012LC Blade
(15km maximum over
single-mode fiber)
Transmit Power (dBm)
Min. Typical Max.
Transmit power (dBm) -20 - -14
Receive sensitivity -31dBm
Optical frequency 1310nm
AT-MCF2012LC Blade
(2km maximum over
multi-mode fiber)
Transmit Power (dBm)
Min. Typical Max.
Transmit power (dBm) -15 - -8
Receive sensitivity -31dBm
Optical frequency 1310nm
Autres manuels pour AT-MCF2000
1
Ce manuel convient aux modèles suivants
5
Table des matières
Autres manuels Allied Telesis Matériel réseau
Allied Telesis
Allied Telesis ADSL24A Manuel utilisateur
Allied Telesis
Allied Telesis CentreCOM 3600 Series Manuel utilisateur
Allied Telesis
Allied Telesis iMAP Express 7112 Manuel utilisateur
Allied Telesis
Allied Telesis AR440S Manuel utilisateur
Allied Telesis
Allied Telesis AT-TN102-A Manuel utilisateur
Allied Telesis
Allied Telesis AT-SPFX/15 Manuel utilisateur
Allied Telesis
Allied Telesis AT-TN125-A Manuel utilisateur
Allied Telesis
Allied Telesis SwitchBlade x8112 Manuel utilisateur
Allied Telesis
Allied Telesis AT-SPFX/2 Manuel utilisateur
Allied Telesis
Allied Telesis AT-SPFXBD-LC-13 Manuel utilisateur
Allied Telesis
Allied Telesis iMAP 9400 Manuel utilisateur
Allied Telesis
Allied Telesis AT-A14 Manuel utilisateur
Allied Telesis
Allied Telesis AT-TN136-A Manuel utilisateur
Allied Telesis
Allied Telesis AT-SPLX40/1550 Manuel utilisateur
Allied Telesis
Allied Telesis AT-TN128-A Manuel utilisateur
Allied Telesis
Allied Telesis CentreCOM AT-3606F Manuel utilisateur
Allied Telesis
Allied Telesis AT-SPLX40 Manuel utilisateur
Allied Telesis
Allied Telesis AT-SPBD10-13 Manuel utilisateur
Allied Telesis
Allied Telesis AT-FS708 Manuel utilisateur
Allied Telesis
Allied Telesis iMap 9100 Manuel utilisateur
Manuels Matériel réseau populaires d'autres marques
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuel utilisateur
Yudor
Yudor YDS-16 Manuel utilisateur
D-Link
D-Link ShareCenter DNS-320L Manuel utilisateur
Samsung
Samsung ES1642dc Instructions d'utilisation
Honeywell Home
Honeywell Home LTEM-PV Instructions de montage
