Allied Control System Cloudwarm Manuel utilisateur
Shenzhen Allied Control System Co,. Ltd.
Cloudwarm Manual (HRT-278 Wireless) Rev 1.1 Aug 2016
1
Shenzhen Allied Control System Co,. Ltd.
Cloudwarm Manual (HRT-278 Wireless) Rev 1.1 Aug 2016
2
Content
1. Packing List.....................................................................P3
2. Compatibility...................................................................P3
3. RF Coupling....................................................................P3
4. App Setup And Wi-Fi Configuration.............................P3
5. Room Thermostat (Transmitter).................................P10
6. Receiver........................................................................P12
7. Specification.................................................................P13
*Thank you for choosing Cloudwarm. Please read this manual before
installing! It is recommended that this device is installed by a qualified
electrician.
Shenzhen Allied Control System Co,. Ltd.
Cloudwarm Manual (HRT-278 Wireless) Rev 1.1 Aug 2016
3
1. Packing list
Room Thermostat (Transmitter) ×1
Receiver ×1
Accessory package ×1
Dowels ×2,
Fix screws ×2,
Whitestickypads ×2,
Black sticky magnetic pads × 3
USB cable × 1
Adapter × 1
Manual ×1
2. Compatibility
Cloudwarm is compatible with most of heating systems, including:
Combi system and heat-only boilers
Conventional and condensing boilers
3. RF Coupling
Long press light on receiver, green light is on and red light flicks regularly. Then long press
MODE button to enter coupling state. Displaying “-----” on transmitter is changed to
wireless communication channel (Default channel is 10, 0-19 channels optional). RF
icon on transmitter changed from flicking to constant on means coupling succeeded..
4. App Setup And Wi-Fi Configuration
Step 1 Download App onto your mobile device
For Android operating system, go to Google Play and search Cloudwarm;:
For iOS operating system, go to App Store and search Cloudwarm.
Step 2 Create an account
Please make sure your mobile device is connected to Wi-Fi successfully.
1. Open Cloudwarm App, tap “ Register”;
2. Create an account. You will need to enter device ID to proceed. ID code is to be
found at the back of thermostat or on package box;
3. Log in.
Shenzhen Allied Control System Co,. Ltd.
Cloudwarm Manual (HRT-278 Wireless) Rev 1.1 Aug 2016
4
Step 3 Connect Cloudwarm to Wi-Fi
For this operation the phone must be connected to the same WIFI network with that
connect the thermostat. Only after the initial connection is established, you will be able to
use 3 g/4 g mobile networks to control Cloudwarm application on your mobile phone.
There are two steps to configure your Wi-Fi connection:
1. Tap in top right corner of the Sign In interface and follow the instructions on APP
to connect Cloudwarm to Wi-Fi;
2. Add the Wi-Fi configured thermostats onto one App.
Alternatively you can carry out step 2 before step 1.
Shenzhen Allied Control System Co,. Ltd.
Cloudwarm Manual (HRT-278 Wireless) Rev 1.1 Aug 2016
5
Step 4 Settings.
** To get local weather information shown on App ( top left corner), please go to top left
menu and go to Account. Input location information (where Cloudwarm is being
installed) at Weather Location line.
** Tap “Time zone” to set Summer/Winter time.
①Outdoor weather information
②Current room temperature
③Target room temperature
④Heating status
Manual mode: set the desired temperature by sliding your fingers on screen；
Shenzhen Allied Control System Co,. Ltd.
Cloudwarm Manual (HRT-278 Wireless) Rev 1.1 Aug 2016
6
Program mode: Tap program mode, enter programming interface, tap the screen,
the below screen appears:
Set the desired temperature and time. Tap the program screen again to set temperatures
and heating time for another period of time in the same day if needed. If an adjusted
program to be copied to another day or set of days, go to top right corner “Apply to” and
select the days desired the same operation to be repeated to.
If changes to preset program needed, switch to Manual Mode, and set per needs. To go
back to the original Program Mode, just switch it back.
Shenzhen Allied Control System Co,. Ltd.
Cloudwarm Manual (HRT-278 Wireless) Rev 1.1 Aug 2016
7
OFF Mode: When set to OFF Mode, Cloudwarm only heats when the room
temperature drops below 5 to prevent frost damage.℃
Below underlined content is for Open Therm protocol supported boiler ONLY.
(Refer to your boiler manual to know if it is Open Therm protocol supported.)
Enter “ Control my boiler” to see your boiler working state.
Winter mode：display heating temperature and DHW (Domestic Hot Water)
temperature.
Shenzhen Allied Control System Co,. Ltd.
Cloudwarm Manual (HRT-278 Wireless) Rev 1.1 Aug 2016
8
①Heating water temperature in boiler
②Water pressure in boiler
③Heating target temperature
④DHW target temperature
⑤Boiler flame state
⑥Boiler error code（defined by boiler manufacturer）
⑦Heating state
Summer mode: display DHW temperature；heating function is off.
Shenzhen Allied Control System Co,. Ltd.
Cloudwarm Manual (HRT-278 Wireless) Rev 1.1 Aug 2016
9
Off Mode：Anti-frost function.
Go to top right corner, tap drop down menu, tap “ Technical” to see boiler working
data and error code (defined by boiler manufacturer).
Shenzhen Allied Control System Co,. Ltd.
Cloudwarm Manual (HRT-278 Wireless) Rev 1.1 Aug 2016
10
5. Room Thermostat (Transmitter)
If network is not available, thermostat still work per previous settings before
net work cut off, or you can operate by pressing the buttons on thermostat.
All LED light up for 3 seconds upon powering on, followed by version of built-in
hardware.
① MODE: press to select Manual Mode, Program Mode or Off Mode.
② SET: press SET to see current time and current room temperature; press 5s to
connect Wi-Fi. When time displayed on screen, rotate knob to set parameters；
Icon Description/Function
WIFI configuration (WPS)：fast double press SET to
enter Wi-Fi configuration, use router WPS function.
Press set again and rotate the knob to set wireless
communication channel (0-19) (default channel is
channel 10)
Press set again to set Hysteresis ON value（Range
0-2 in 0.1 increment). For example, when target℃
temp set at 25 , hysteresis ON temp at 0.5 ,℃℃
room temp at 24.5 ,℃transmitter sends heating
request signal to boiler.
Ce manuel convient aux modèles suivants
1
Table des matières
Manuels Thermostat populaires d'autres marques
EWELLY
EWELLY EW-181 Manuel utilisateur
Prolon
Prolon T1100 Instructions d'installation
Computherm
Computherm Q20 Manuel utilisateur
Heatmiser
Heatmiser neoStat Manuel utilisateur
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur
