Alliance Laundry Systems FLW1526C Manuel utilisateur

Installation/Operation

www.comlaundry.com

Frontload Washers

Metered Commercial

FLW1526C

Part No. 802734R5

September 2010

Keep These Instructions for Future Reference.

(If this machine changes ownership, this manual must accompany machine.)

Para bajar una copia de estas instrucciones

en español, visite www.comlaundry.com.

802734

NOTE: The WARNING and IMPORTANT instructions appearing in this manual are not meant to cover

all possible conditions and situations that may occur. It must be understood that common sense, caution,

and carefulness are factors which cannot be built into these washers. These factors MUST BE supplied by

the person(s) installing, maintaining, or operating the washer.

Always contact the distributor, service agent, or the manufacturer about any problems or conditions you do not

understand.

Failure to install, maintain, and/or operate this machine according to the manufacturer's

instructions may result in conditions which can produce bodily injury and/or property

damage.

W030

WARNING

means without the expressed written consent of the publisher.

802734

Table of

Contents

Safety Information.............................................................................. 4

Explanation of Safety Messages........................................................... 4

Important Safety Instructions ............................................................... 4

Installation........................................................................................... 6

Dimensions and Specifications............................................................. 6

Before You Start ................................................................................... 7

Tools ................................................................................................ 7

Installing the Washer ............................................................................ 8

Step 1: Position Washer Near Installation Area .............................. 8

Step 2: Position and Level the Washer ............................................ 8

Step 3: Connect Fill Hoses............................................................... 9

Step 4: (Non-Gravity Drain Models Only)

Connect Drain Hose to Drain Receptacle....................................... 11

Step 5: (Gravity Drain Models Only)

Connect Drain Outlet to Drain System........................................... 12

Step 6: Remove the Shock Sleeves and Shipping Brace ................. 13

Step 7: Wipe Out Inside of Wash Drum .......................................... 13

Step 8: Plug In the Washer............................................................... 14

Step 9: Check Installation ................................................................ 15

Vending................................................................................................. 16

Meter Case ....................................................................................... 16

Slide Extension ................................................................................ 16

Models Prepped for Card Reader..................................................... 17

Operation............................................................................................. 18

Operation Instructions for Coin Slide Operated Washers .................... 18

Step 1: Load Laundry....................................................................... 18

Step 2: Close Loading Door............................................................. 18

Step 3: Add Laundry Supplies ......................................................... 19

Step 4: Set Fabric Selector............................................................... 19

Step 5: Set WASH/RINSE Temperatures........................................ 19

Step 6: Insert Money........................................................................ 19

Indicator Lights................................................................................ 20

Rapid Advance................................................................................. 20

Operation Instructions for MDC Washers............................................ 21

Step 1: Load Laundry....................................................................... 21

Step 2: Close Loading Door............................................................. 21

Step 3: Add Laundry Supplies ......................................................... 22

Step 4: Set Fabric Selector and Wash Temperature......................... 22

Step 5: Insert Coin(s) or Card .......................................................... 23

Step 6: Start Washer......................................................................... 23

Indicator Lights................................................................................ 24

Operation Instructions for NetMaster Washers .................................... 25

Step 1: Load Laundry....................................................................... 25

Step 2: Close Loading Door............................................................. 25

Step 3: Add Laundry Supplies ......................................................... 25

Step 4: Set Fabric Selector............................................................... 26

Step 5: Set Wash Temperature......................................................... 26

Step 6: Insert Coin(s) or Card .......................................................... 26

802734 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Step 7: Start Washer......................................................................... 27

Indicator Lights................................................................................ 27

Maintenance ........................................................................................ 28

User-Maintenance Instructions............................................................. 28

Cold Weather Care........................................................................... 28

Care of Your Washer ....................................................................... 28

Cleaning Glass Sealing Area ........................................................... 28

Replacing Hoses............................................................................... 28

Filter Screens ................................................................................... 28

Vacations and Extended Non-Use ................................................... 28

Reinstallation of Shipping Materials ............................................... 29

Cleaning Foreign Object Trap ......................................................... 29

Troubleshooting .................................................................................. 30

Contact Information........................................................................... 32

Installer Checklist ............................................................... Back Cover

Safety Information

Explanation of Safety Messages

Throughout this manual and on machine decals, you

will find precautionary statements (“DANGER,”

“WARNING,” and “CAUTION”) followed by specific

instructions. These precautions are intended for the

personal safety of the operator, user, servicer, and

those maintaining the machine.

Additional precautionary statements (“IMPORTANT”

and “NOTE”) are followed by specific instructions.

IMPORTANT: The word “IMPORTANT” is used

to inform the reader of specific procedures where

minor machine damage will occur if the procedure

is not followed.

NOTE: The word “NOTE” is used to communicate

installation, operation, maintenance or servicing

information that is important but not hazard

related.

Important Safety Instructions

(Save These Instructions)

1. Read all instructions before using the washer.

2. Refer to the GROUNDING INSTRUCTIONS in

the INSTALLATION manual for the proper

grounding of the washer.

3. Do not wash articles that have been previously

cleaned in, washed in, soaked in, or spotted with

gasoline, dry-cleaning solvents, or other

flammable or explosive substances as they give

off vapors that could ignite or explode.

4. Do not add gasoline, dry-cleaning solvents, or

other flammable or explosive substances to the

wash water. These substances give off vapors that

could ignite or explode.

5. Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been

used for two weeks or more. HYDROGEN GAS

IS EXPLOSIVE. If the hot water system has not

been used for such a period, before using a

washing machine or combination washer-dryer,

turn on all hot water faucets and let the water

flow from each for several minutes. This will

release any accumulated hydrogen gas. The gas

is flammable, do not smoke or use an open flame

during this time.

6. Do not allow children to play on or in the washer.

Close supervision of children is necessary when

the washer is used near children. This is a safety

rule for all appliances.

7. Before the washer is removed from service or

discarded, remove the door to the washing

compartment.

8. Do not reach into the washer if the wash drum is

moving.

9. Do not install or store the washer where it will be

exposed to water and/or weather.

10. Do not tamper with the controls.

Indicates an imminently hazardous

situation that, if not avoided, will cause

severe personal injury or death.

DANGER

Indicates a hazardous situation that, if not

avoided, could cause severe personal

injury or death.

WARNING

Indicates a hazardous situation that, if not

avoided, may cause minor or moderate

personal injury or property damage.

CAUTION

To reduce the risk of fire, electric shock,

serious injury or death to persons when

using your washer, follow these basic

precautions:

W023

WARNING

Safety Information

802734

11. Do not repair or replace any part of the washer, or

attempt any servicing unless specifically

recommended in the user-maintenance

instructions or in published user-repair

instructions that you understand and have the

skills to carry out.

12. To reduce the risk of an electric shock or fire, DO

NOT use an extension cord or an adapter to

connect the washer to the electrical power

source.

13. Use your washer only for its intended purpose,

washing clothes.

14. ALWAYS disconnect the washer from electrical

supply before attempting any service. Disconnect

the power cord by grasping the plug, not the cord.

15. Install the washer according to the

INSTALLATION INSTRUCTIONS. All

connections for water, drain, electrical power and

grounding must comply with local codes and be

made by licensed personnel when required. Do

not do it yourself unless you know how!

16. To reduce the risk of fire, clothes which have

traces of any flammable substances such as

vegetable oil, cooking oil, machine oil,

flammable chemicals, thinner, etc. or anything

containing wax or chemicals such as in mops and

cleaning cloths, must not be put into the washer.

These flammable substances may cause the

fabric to catch on fire by itself.

17. Do not use fabric softeners or products to

eliminate static unless recommended by the

manufacturer of the fabric softener or product.

18. Keep your washer in good condition. Bumping or

dropping the washer can damage safety features.

If this occurs, have your washer checked by a

qualified service person.

19. If the supply cord is damaged, it must be replaced

by a special cord or assembly available from the

manufacturer or its service agent.

20. Be sure water connections have a shut-off valve

and that fill hose connections are tight. CLOSE

the shut-off valves at the end of each wash day.

21. Loading door MUST BE CLOSED any time the

washer is to fill, tumble or spin. DO NOT bypass

the loading door switch by permitting the washer

to operate with the loading door open.

22. Always read and follow manufacturer’s

instructions on packages of laundry and cleaning

aids. Heed all warnings or precautions. To reduce

the risk of poisoning or chemical burns, keep

them out of the reach of children at all times

(preferably in a locked cabinet).

23. Always follow the fabric care instructions

supplied by the garment manufacturer.

24. Never operate the washer with any guards and/or

panels removed.

25. DO NOT operate the washer with missing or

broken parts.

26. DO NOT bypass any safety devices.

27. Failure to install, maintain, and/or operate this

washer according to the manufacturer’s

instructions may result in conditions which can

produce bodily injury and/or property damage.

NOTE: The WARNING and IMPORTANT

SAFETY INSTRUCTIONS appearing in this

manual are not meant to cover all possible

conditions and situations that may occur. Common

sense, caution and care must be exercised when

installing, maintaining, or operating the washer.

Always contact your dealer, distributor, service agent

or the manufacturer about any problems or conditions

you do not understand.

Installation

Dimensions and Specifications

FLW2201N

Standard Capacity Meter Case

43 in. (109.2 cm)

High Capacity Meter Case

43.875 in. (111.44 cm)

28 in. (71.1 cm)

24 in.

(61.0 cm)

26.875 in. (68.3 cm)

13.1 in.

(33.3 cm)

31.1 in. (79 cm)

2 in.

(5.1 cm)

36 in. (91.44 cm)

14.6 in.

(37.08 cm)

MODELS EQUIPPED WITH DRAIN HOSE

Coin Slide Models 40.19 in. (102.08 cm)

Electronic Control Models 38.19 in. (97 cm)

Coin Slide Models

21.56 in. (54.76 cm)

Electronic Control Models

22.06 in. (56.03 cm)

29.6 in. (75.1 cm)

1.5 in.

(3.8 cm)

FLW2202N

11.5 in. (3.81 cm) Inside Diameter

1.86 in. (4.72 cm) Outside Diameter

28 in. (71.1 cm)

24 in.

(61.0 cm)

26.875 in. (68.3 cm)

13.1 in.

(33.3 cm)

31.1 in. (79 cm)

4.1 in.

(10.41cm)

36 in. (91.44 cm)

14.6 in.

(37.08 cm)

MODELS WITH GRAVITY DRAIN

Coin Slide Models 40.19 in. (102.08 cm)

Electronic Control Models 38.19 in. (97 cm)

Coin Slide Models

21.56 in. (54.76 cm)

Electronic Control Models

22.06 in. (56.03 cm)

29.6 in. (75.1 cm)

4.2 in.

(10.67cm)

1.5 in.

(3.8 cm)

Standard Capacity Meter Case 43 in. (109.2 cm)

High Capacity Meter Case 43.875 in. (111.44 cm)

Installation

802734

Before You Start

Tools

For most installations, the basic tools you will need

are:

Figure 1

NOTE: If the washer is delivered on a cold day

(below freezing), or is stored in an unheated room

or area during the cold months, do not attempt to

operate it until the washer has had a chance to

warm up.

NOTE: Install dryer before washer. This allows

room for attaching exhaust duct.

NOTE: Some moisture in the wash drum is normal.

Water is used during testing at the manufacturer.

D074I

1Wrench

2Screwdriver

3Pliers

4Socket Wrench

5Level

123

Installation

802734

Installing the Washer

Step 1: Position Washer Near Installation

Area

Move washer so that it is within 4 feet (1.2 meters) of

the desired area of installation.

NOTE: For best performance and to minimize

vibration or movement, install washer on a solid,

sturdy and level floor. Some floors may need to be

reinforced, especially on a second floor or over a

basement. Do not install the washer on carpeting,

soft tile, a platform or other weakly supported

structures.

Figure 2

Step 2: Position and Level the Washer

Position washer so it has sufficient clearance for

installation and servicing.

NOTE: Use of the dispenser drawer or washer door

as a handle in the transportation of the washer may

cause damage to the dispenser or door.

Place washer in position on a solid, sturdy and level

floor. Installing the washer on any type of carpeting,

soft tile, a platform or other weakly supported

structures is not recommended.

Place a level on the cabinet top and check if the

washer is level from side to side and front to back.

NOTE: Level must rest on raised portion of top

panel. Refer to Figure 3.

If washer is not level, tilt washer to access the front

and rear leveling legs. For easier access to leveling

legs, prop up washer with a wooden block. Refer to

Figure 3. Loosen 7/8 in. locknut and adjust legs until

the washer is level from side to side and front to back

(using a level). Washer should not rock.

Tighten the locknuts securely against the washer

base using the 7/8 in. wrench. If the locknuts are not

tight, washer will move out of position during

operation.

H135I

+,

Washers elevated above floor level must

be anchored to that elevated surface,

base or platform. The material used to

elevate the washer should also be

anchored to the floor to ensure that the

washer will not walk or that the washer

can not be physically pulled, tipped or

slid from its installed position. Failure to

do so may result in conditions which can

produce serious injury, death and/or

property damage.

W306

WARNING

Autres manuels pour FLW1526C

Table des matières

Autres manuels Alliance Laundry Systems Rondelle

Alliance Laundry Systems

Alliance Laundry Systems HC18 Manuel utilisateur

Alliance Laundry Systems

Alliance Laundry Systems UW35P3 Guide de maintenance et de service

Alliance Laundry Systems

Alliance Laundry Systems UX55PVXF6 Manuel du propriétaire

Alliance Laundry Systems

Alliance Laundry Systems 800797 Manuel utilisateur

Alliance Laundry Systems

Alliance Laundry Systems 801529 Manuel de service

Alliance Laundry Systems

Alliance Laundry Systems HWF261*E Manuel utilisateur

Alliance Laundry Systems

Alliance Laundry Systems H372I Manuel utilisateur

Alliance Laundry Systems

Alliance Laundry Systems NX30BVPA7 Mode d’emploi

Alliance Laundry Systems

Alliance Laundry Systems 802756R3 Manuel utilisateur

Alliance Laundry Systems

Alliance Laundry Systems AWN43RSN115CW01 Mode d'emploi

Alliance Laundry Systems

Alliance Laundry Systems PA20 X CONTROL Manuel utilisateur

Alliance Laundry Systems

Alliance Laundry Systems UW100VV Series Manuel utilisateur

Alliance Laundry Systems

Alliance Laundry Systems HF18VNV Manuel utilisateur

Alliance Laundry Systems

Alliance Laundry Systems D1627ENR5 Manuel du propriétaire

Alliance Laundry Systems

Alliance Laundry Systems Speed Queen TC5000WN Manuel utilisateur

Alliance Laundry Systems

Alliance Laundry Systems 801455R2 Manuel utilisateur

Alliance Laundry Systems

Alliance Laundry Systems CHM1772C Guide de dépannage

Alliance Laundry Systems

Alliance Laundry Systems TLW12C SVG Manuel du propriétaire

Alliance Laundry Systems

Alliance Laundry Systems H002C Manuel utilisateur

Alliance Laundry Systems

Alliance Laundry Systems NX18BVPA6 Mode d’emploi

Alliance Laundry Systems

Alliance Laundry Systems HWNLX2SP111CW01 Mode d'emploi

Alliance Laundry Systems

Alliance Laundry Systems Cabinet Hardmount Mode d’emploi

Alliance Laundry Systems

Alliance Laundry Systems F232179R5 Manuel du propriétaire

Alliance Laundry Systems

Alliance Laundry Systems Washer-Extractor Manuel utilisateur

Manuels Rondelle populaires d'autres marques

Tricity Bendix

Tricity Bendix AW 1000 W Guide produit

Panasonic

Panasonic NA-F60L5WRB Manuel utilisateur

GE WSLP1500 Manuel

Electrolux

Electrolux EWF1284EDW Manuel utilisateur

Bosch

Bosch WAN2829BSN Manuel utilisateur

LG TV2516DV3B Manuel utilisateur

LG TH2517DSAV Manuel utilisateur

VESTEL

VESTEL CMH-XL 7510 TE Manuel utilisateur

AEG

AEG 74335 Manuel d'utilisation

Johnson

Johnson JWF721A Manuel utilisateur

Beko

Beko WTE7604XLW0 Manuel utilisateur

Danby

Danby DTT100A1WDB Instructions de montage

Amica

Amica WA 14 Ex Manuel utilisateur

Daewoo

Daewoo DWD-F1222 Manuel utilisateur

Bosch

Bosch WAS28461AU Manuel utilisateur

Miele

Miele PW 6080 Vario Manuel utilisateur

Finlux

Finlux FLX108CF220 Manuel utilisateur

Whirlpool

Whirlpool 3LBR5132AN0 Manuel utilisateur