AlfrescoPlus MODULE Series Manuel utilisateur
BBQ MODULE
(ALL SIZES)
ASSEMBLY
INSTRUCTIONS
For further instruction, please visit:
www.alfrescoplus.com.au
04014 - Oct 21/19
2 | ALFRESCOPLUS™
WARNING! – THIS IS A PERMANENT
CONNECTION SYSTEM!
WHAT’S NEEDED?
Tools Required:
• Soft Sided Hammer (Not Included)
• Philips head screwdriver (Not Included)
• Allen Keys x 2 (Included)
• 50mm Diameter Hole saw or Jigsaw
WHAT’S IN THE BOX?
Box 1 of 3 = MODULE Bench-top
Box 2 of 3 = MODULE Panels
Box 3 of 3 = MODULE Doors
PARTS INCLUDED:
FRAMES
• Cabinet Frames (Various Profiles)
PRE ASSEMBLED VERTICAL PANELS x 3
FOUR PRONGS x 4
WHITE PANELS x 6
DOORS
• 865/885/1045/1075/1165 x 2
• 1430/1530 x 4
PLINTH Feet x 4
HARDWARE
• Screw Pack x 1
• Allen Keys x 2
• Door Hinge Handle Set x 1
Essential TIP: Ensure you have a stable flat surface or workbench to work
from. The most ideal height to assemble the module is waist height. The
workbench should be at least 1.8m (W) x 1m(H) x 0.7m(D) in size.
BBQ MODULE (ALL SIZES) ASSEMBLY INSTRUCTIONS | 3
Remove all parts from the cartons. DO
NOT unwrap the frames at this stage.
Preparing the panels:
• Remove all the white panels from
the carton and place in an easily
accessible location. (All red arrow labels
to face upwards).
• Remove at least 10cm of plastic film
alongside the edge of the panels, as per
FIG 1.
Essential TIP: DO NOT remove all the
plastic film from the panels, since the 4
way red arrows are an integral part of the
assembly process.
The red arrow stickers are placed
on top of the plastic on most panels
and therefore the plastic should not
completely be removed at this stage.
FIG. 1
WHAT TO DO NEXT?
4 | ALFRESCOPLUS™
ASSEMBLED VIEW OF FRAMES & PANELS
AG
C
FIG. 2 FIG. 3 FIG. 4
FIG. 5
A G C
BBQ MODULE (ALL SIZES) ASSEMBLY INSTRUCTIONS | 5
FIG. 6
At this stage your progress should look like FIG 6.
A
G
C
ASSEMBLY TOP BOTTOM & BACK
FIG. 7
A
G
C
6 | ALFRESCOPLUS™
FIG. 8 FIG. 9
FIG. 10
At this stage your progress should look like FIG 10.
BBQ MODULE (ALL SIZES) ASSEMBLY INSTRUCTIONS | 7
ASSEMBLING SIDE & CENTRE WALLS
FIG. 11 FIG. 12
FIG. 13
8 | ALFRESCOPLUS™
FIG. 14
FIG. 15
BBQ MODULE (ALL SIZES) ASSEMBLY INSTRUCTIONS | 9
FIG. 17
ASSEMBLING PLINTH FEET & KICKER PLATE
No Allocating holes are used for plinth feet since the inside frame edge provides the
guide. Place Plinth foot into corner of cabinet frame. Screw down with screws provided.
If easier, remove plinth shaft from baseplate then screw down base plate first. If desired
move the front two plinth feet further back to create a deeper kick-plate position.
FIG. 16
10 | ALFRESCOPLUS™
ATTACHING THE KICK PLATE
Please take note that the Kick plate provided is reversible, thereby giving you the choice
between a black “shadow line” finish or stylish silver finish. The Kick plate Biscuit is used
to connect onto more than one cabinet, thereby aligning the kick plate.
FIG. 18
FIG. 19 FIG. 20
Table des matières
