ALFAtron ALF- WUK3A Manuel utilisateur

ALFATRON ALF- WUK3A

ALF-WUK3A

ALFATRON ALF - WUK3A

HDMI 2.0 3x1 Switcher with Auto-switching

ALF-WUK3A

Preface

Read this user manual carefully before using the product. Pictures shown in this

manual are for reference only. Different models and specifications are subject to real

product.

This manual is only for operation instruction, please contact the local distributor for

maintenance assistance. The functions described in this version were updated till

February, 2019. In the constant effort to improve the product, we reserve the right to

make functions or parameters changes without notice or obligation. Please refer to the

dealers for the latest details.

FCC Statement

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. It has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a commercial

installation.

Operation of this equipment in a residential area is likely to cause interference, in which

case the user at their own expense will be required to take whatever measures may be

necessary to correct the interference.

Any changes or modifications not expressly approved by the manufacture would void

the user’s authority to operate the equipment.

ALF-WUK3A

SAFETY PRECAUTIONS

To ensure the best performance from the product, please read all instructions carefully

before using the device. Save this manual for further reference.

Unpack the equipment carefully and save the original box and packing material for

possible future shipment.

Follow basic safety precautions to reduce the risk of fire, electrical shock and injury

to persons.

Do not dismantle the housing or modify the module. It may result in electrical shock

or burn.

Using supplies or parts not meeting the products’ specifications may cause damage,

deterioration or malfunction.

Refer all servicing to qualified service personnel.

To prevent fire or shock hazard, do not expose the unit to rain, moisture or install

this product near water.

Do not put any heavy items on the extension cable in case of extrusion.

Do not remove the housing of the device as opening or removing housing may

expose you to dangerous voltage or other hazards.

Install the device in a place with fine ventilation to avoid damage caused by

overheat.

Keep the module away from liquids.

Spillage into the housing may result in fire, electrical shock, or equipment damage.

If an object or liquid falls or spills on to the housing, unplug the module immediately.

Do not twist or pull by force ends of the optical cable. It can cause malfunction.

Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to

the device before cleaning.

Unplug the power cord when left unused for a long period of time.

Information on disposal for scrapped devices: do not burn or mix with general

household waste, please treat them as normal electrical wastes.

ALF-WUK3A

Table of Contents

1. Product Introduction....................................................................................................1

1.1 Features ............................................................................................................1

1.2 Package List ......................................................................................................1

2. Technical Specification................................................................................................2

3. Panel Description........................................................................................................3

3.1 Front Panel........................................................................................................3

3.2 Rear Panel.........................................................................................................3

4. System Connection.....................................................................................................4

4.1 Usage Precaution ..............................................................................................4

4.2 System Diagram ................................................................................................4

5. Operation of Switcher .................................................................................................5

5.1 Button Control....................................................................................................5

5.1.1 Manual Switching ....................................................................................5

5.1.2 Automatic Switching ................................................................................5

5.2 IR Remote Control.............................................................................................6

6. Panel Drawing ............................................................................................................6

7. Troubleshooting & Maintenance .................................................................................7

8. Customer Service .......................................................................................................8

9. Warranty………………………………………………………………………………………9

ALF-WUK3A

1. Product Introduction

Thanks for choosing the Alfatron WUK3A HDMI 2.0 3x1 Switcher. It is an auto switcher

with three HDMI video inputs and one HDMI output. It supports HDMI video resolution

up to 4Kx2K@60Hz 4:4:4 HDR, Dolby Vision and multichannel audio.

In auto-switching mode, it switches to an HDMI input as soon as a new source is

connected. When the active input is removed, the switcher will select the first source on

the lowest numbered input. The switcher can be controlled via IR with the remote, or

from the source button on the front panel of the switcher.

1.1 Features

Switches any one of three HDMI inputs to one HDMI output.

Supports video resolution up to 4Kx2K@60Hz 4:4:4 and 1080P.

Supports HDR 10 and Dolby Vision.

18Gbps high bandwidth.

Fully compliant with the HDMI 2.0 and HDCP 2.2 specifications.

Controlled by IR remote.

Powered by the HDMI input source and no need of any external power supply,

simplifying the installation and operation.

Supports CEC pass-through.

Provides four LEDs to indicate the current operating status.

Cost efficiency.

Metal design.

1.2 Package List

1x HDMI 2.0 3x1 Switcher

1x IR Remote

1x User Manual

Note: Please contact your distributor immediately if any damage or defect in the

components is found.

ALF-WUK3A

2. Technical Specification

Video Input

Input

(3) HDMI

Input Connector

(4) Female type-A HDMI

HDMI Input Resolution Up to 4Kx2K@60Hz 4:4:4

Video Output

Output (1) HDMI

Output Connector

(1) Female type-A HDMI

HDMI Output Resolution

Up to 4Kx2K@60Hz 4:4:4

General

HDMI Standard 2.0

HDCP Version

2.2

HDR Supported

Dolby Vision

Supported

CEC Pass-through

Supported

HDCP Pass-through

Supported

EDID Pass-through Supported

Hot-plug

Supported

HDMI Audio Format

Supports LPCM 7.1 audio, Dolby Atmos®, Dolby® TrueHD, Dolby

Digital® Plus, DTS:X™, and DTS-HD® Master Audio™ pass-

through.

HDMI Cable Length

From source to display device:

1080p@60Hz ≤ 20m, 4K@60Hz(4:2:0) ≤ 10m, 4K@60Hz(4:4:4) ≤

Bandwidth 18Gbps

Operation Temperature

-5

℃

~ +55

℃

Storage Temperature -25℃~ +70℃

Relative Humidity

10%-90%

Power Supply

Power Consumption

0.1W (Max)

Dimension (W*H*D) 105mm x 55mm x 18mm

Net Weight

150g

Note: Please adopt high-qualified HDMI cable fully compliant with HDMI 2.0 for reliable transmission.

ALF-WUK3A

3. Panel Description

3.1 Front Panel

①IR: Built-in IR sensor to receive IR signal from IR remote to control the switcher.

②INPUT 1~3 LED:

The LED illuminates blue when the corresponding input channel.is selected

and there is HDMI signal input.

The LED blinks blue when the corresponding input channel.is selected but no

signal input.

③AUTO LED:

The LED illuminates blue in automatic switching mode.

The LED is off in manual switching mode.

④SOURCE AUTO/3S Button:

Press to switch to next input source.

Press and hold at least three seconds to switch between manual switching

mode and automatic switching mode.

3.2 Rear Panel

①HDMI IN 1~3: Three type-A female HDMI input ports to connect HDMI sources.

②HDMI OUT: Type-A female HDMI output port to connect HDMI display.

1234

ALF-WUK3A

4. System Connection

4.1 Usage Precaution

Make sure all components and accessories are included before installation.

System should be installed in a clean environment with proper temperature and

humidity.

All of the power switches, plugs, sockets, and power cords should be insulated and

safe.

All devices should be connected before power on.

4.2 System Diagram

The following diagram illustrates typical input and output connections that can be

utilized with this switcher:

4K TV

Game Console

Laptop

Blu-Ray

IR Control

Remote

ALF-WUK3A

5. Operation of Switcher

5.1 Button Control

5.1.1 Manual Switching

When the switcher is in manual switching mode, the AUTO LED is off, and please

press SOURCE AUTO/3S button to switch to the next input.

5.1.2 Automatic Switching

Press and hold the SOURCE AUTO/3S button at least three seconds to enable

automatic switching mode. The AUTO LED will turn to blue.

When in the AUTO mode, the switcher will switch according to the following rules:

Press and hold the SOURCE AUTO/3S button at least three seconds again can exit

AUTO mode, but the input source will not be changed.

Press the SOURCE AUTO/3S button also can forcibly change the input source.

New Input: Upon detecting a new input, the switcher will automatically select the

new input.

Reboot: Once power is restored to the switcher, if the last selected source is still

available, the switcher will still output this signal, otherwise, the switcher will switch

to the first available active input starting at HDMI IN 1.

Source Removed: When an active source is removed, the switcher will switch to

the first available active input starting at the next input channel.

Table des matières

Autres manuels ALFAtron Changer

ALFAtron

ALFAtron ALF-21E-SOFTCODEC Manuel utilisateur

ALFAtron

ALFAtron SC121D-TN Manuel utilisateur

ALFAtron

ALFAtron ALF-WUK4A Manuel utilisateur

ALFAtron

ALFAtron ALF-MMX1616-N Manuel utilisateur

ALFAtron

ALFAtron ALF-WP70T/RS Manuel utilisateur

ALFAtron

ALFAtron ALF-WP70S-UB Manuel utilisateur

ALFAtron

ALFAtron SC61E Manuel utilisateur

ALFAtron

ALFAtron ALF-MMX3232A-N Manuel utilisateur

ALFAtron

ALFAtron MUH88E Manuel utilisateur

ALFAtron

ALFAtron MUH44N Manuel utilisateur

ALFAtron

ALFAtron ALF-21E-CODEC Manuel utilisateur

ALFAtron

ALFAtron ALF-WU4K HUB Manuel utilisateur

ALFAtron

ALFAtron SM62T Manuel utilisateur

ALFAtron

ALFAtron SCK41TS Manuel utilisateur

ALFAtron

ALFAtron SCU61E Manuel utilisateur

ALFAtron

ALFAtron WUH4 Manuel utilisateur

ALFAtron

ALFAtron SC51TS Manuel utilisateur

ALFAtron

ALFAtron ALF-SCU91T-N Manuel utilisateur

ALFAtron

ALFAtron ALF-SMW42S Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur