Alesis TransActive Manuel utilisateur

TransActive Wireless

USER GUIDE

ENGLISH

USER GUIDE (ENGLISH)

1. Make sure all items listed on the front of this guide are included in the box.

2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE

PRODUCT.

3. MAKE SURE THAT YOU HAVE COMPLETELY CHARGED THE

BATTERY PRIOR TO FIRST USE FOR MAXIMUM BATTERY LIFE.

4. Study this setup diagram.

5. Make sure all input devices such as microphones, CD players, or MP3

players are turned off and volume settings are set at "zero."

6. Connect all devices as shown.

7. Switch everything on in the following order:

•audio input sources (i.e. microphones, instruments, CD/MP3 Players)

•TransActive Wireless

8. When turning off, always reverse this operation:

•TransActive Wireless

•last, any input devices

RECHARGEABLE BATTERIES

Rechargeable lead-acid batteries are the same type used in automobiles. As with your car battery, how you use this battery has

a significant impact on its lifespan. With proper use and treatment, a lead-acid battery can last for years. Here are some

recommendations for getting the longest life from the internal battery.

GENERAL USAGE

•FULLY CHARGE THE BATTERY BEFORE USING IT.

•CHARGE THE BATTERY COMPLETELY AFTER EACH USE.

•AVOID COMPLETELY DRAINING THE BATTERY.

•You may leave the unit plugged in for up to two weeks.

•For maximum life, drain the battery 80% once a month.

STORAGE

•Avoid storing in high temperatures and moist places.

•For long-term storage, periodically recharge the battery.

•If you do not charge the battery for six months, it may not charge.

REPAIR

•As the battery nears the end of its life, it may lose its ability to recharge. If this occurs, contact technical support at

www.alesis.com/supporthome.

DISPOSAL

•Bring the unit to a recycling center or dispose of in accordance with local ordinances.

BOX CONTENTS

TransActive Wireless

Power Cable (standard IEC)

User Guide

Safety Instructions & Warranty

Information Booklet

TOP PANEL

MICROPHONE*

TABLET OR

OTHER DEVICE*

iPad is a trademark of Apple Inc., registered in the U.S. and other countries.

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such

marks by Alesis is under license. Other trademarks and trade names are those of their respective owners.

REAR PANEL

POWER

*SOLD SEPARATELY

DIAGRAM AND PARTS DESCRIPTION

1. Microphone Input with Volume Control (XLR-1/4"): This mono input

accepts a XLR-1/4" input such as a microphone or other musical instrument.

2. Instrument/Microphone Input with Volume Control: 1/4” TS input, high-

impedance for guitar.

3. Auxiliary Input with volume Control: This stereo 1/8” input can be used to

connect a CD player, MP3 player, or other audio source. Volume control

adjusts auxiliary input and Bluetooth volume.

4. Bluetooth: The Paired LED will be lit when a device is paired to

TransActive Wireless. This LED will not be lit when TransActive Wireless is

first powered on (unless it was previously paired with a device). Press the

Disconnect button to disconnect a paired Bluetooth device.

5. Master Volume Control: This adjusts the speaker’s main mix volume,

which includes Instrument/Microphone Input, Auxiliary Input, Tuner, and the

audio of a paired Bluetooth device.

6. Power LED: Indicates whether TransActive Wireless is on or off.

7. Device Charge: Connect your device’s charge cable here to charge it. USB

charging only functions when the unit’s power is turned on.

Note: Users with iPad (3rd generation) may experience

slower charging. We recommend charging with the

screen locked when using iPad (3rd generation).

8. Device Cradle: Place your iPad/iPod touch®/iPhone®,

Android®or other device here to be held.

9. Power Cable Input (IEC): Insert the included power

cable here to charge the unit. Note that the TransActive

Wireless can run off the power adapter while it

simultaneously charges the battery. The charge indicator

illuminates when the battery is charging.

10. Voltage Selector*: If your unit has a voltage selector

switch, change its setting only when necessary (e.g., when traveling to a country or region with a different

voltage). Selecting an improper voltage setting can damage the unit. To change its setting, only remove *one*

screw of the cover and slide it aside to expose the selector.

11. Power ON/OFF Switch: Turns TransActive Wireless on or off. Please note that while TransActive Wireless is

connected to a power source, it does not need to be powered on to charge the battery.

12. Battery Level Indicator: While the unit is powered ON, these four lights indicate the power left in the battery.

Battery life varies based on volume and usage.

*WARNING: If your unit has a voltage

selector switch, change its setting only when

necessary (e.g., when traveling to a country

or region with a different voltage). Selecting

an improper voltage setting can damage the

unit. To change its setting, only remove *one*

screw of the cover and slide it aside to

expose the selector.

Android is a trademark of Google Inc.

iPhone and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

TROUBLESHOOTING

If the sound is distorted: Try lowering the volume control of your sound source or musical instrument. Also, try to

reduce the overall volume of TransActive Wireless.

If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass level. This

will allow you to play the music louder before clipping (distortion) occurs.

If there is a high-pitched whistling noise when using microphones: This is probably feedback. Point the

microphones away from the speaker.

If you can’t hear the microphone over the music volume: Turn down the music volume from your source.

PAIRING A BLUETOOTH DEVICE

1. Turn on your Bluetooth device.

2. Power on TransActive Wireless and it will automatically go into pairing mode to search for Bluetooth devices.

You will know you are in pairing mode when the LED is blank.

3. If your Bluetooth device is not able to pair to TransActive Wireless, press the disconnect button on TransActive

Wireless to break previous Bluetooth connections and reset the Bluetooth module.

4. Navigate to your Bluetooth device’s setup screen, find “Alesis TransAct” and connect.

Note: If your Bluetooth device prompts for a pairing code, enter ‘0000’.

5. TransActive Wireless LED will light up solid when it is 'paired'.

Note: Users should consider updating their OS if experiencing trouble with pairing or playing music.

6. To disconnect pairing, press the ‘Disconnect’ button on TransActive Wireless.

7. To connect to another Bluetooth device, repeat steps 3-4.

Note: Maximum range will be achieved when using devices with Bluetooth 4.0.

Autres manuels pour TransActive

Autres manuels Alesis Équipement d'enregistrement

Alesis

Alesis ProTrack Manuel utilisateur

Alesis

Alesis MICROVERB 4 Manuel utilisateur

Alesis

Alesis BRC Manuel utilisateur

Alesis

Alesis Studio Interface MasterControl Manuel utilisateur

Alesis

Alesis Studio12R Manuel utilisateur

Alesis

Alesis MIXING CONSOLES Manuel utilisateur

Alesis

Alesis MultiMix16USB 2..0 Document technique

Alesis

Alesis DM DOCK Manuel utilisateur

Alesis

Alesis ProTrack Manuel utilisateur

Alesis

Alesis Playmate Vocalist CP0 Manuel utilisateur

Alesis

Alesis MICROVERB 4 Manuel utilisateur

Alesis

Alesis QUADRAVERB Manuel utilisateur

Alesis

Alesis MidiVerb 3 Manuel utilisateur

Alesis

Alesis NANOVERB 2 Manuel utilisateur

Alesis

Alesis 3 Manuel utilisateur

Alesis

Alesis ADAT-HD24 FirePort 1394 Manuel utilisateur

Alesis

Alesis Microverb IV Manuel utilisateur

Alesis

Alesis ADAT BRC Manuel utilisateur

Alesis

Alesis iO Dock Manuel utilisateur

Alesis

Alesis Microverb Manuel utilisateur

Alesis

Alesis ADAT-M20 Manuel utilisateur

Alesis

Alesis ADAT Manuel utilisateur

Alesis

Alesis MMT-8 Manuel utilisateur

Alesis

Alesis ADAT-M20 Manuel d'installation

Manuels Équipement d'enregistrement populaires d'autres marques

KV2 Audio

KV2 Audio 500 Series Manuel utilisateur

Robotics Technologies

Robotics Technologies microBus-Cam II Manuel utilisateur

Seca

Seca 460 Manuel utilisateur

Cognex

Cognex MVS-8000 Series Manuel utilisateur

Mect

Mect MPNC006 Series Manuel utilisateur

Bad Caf

Bad Caf THE LEASH Manuel utilisateur

Strymon

Strymon NIGHTSKY Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuel utilisateur

Tews Technologies

Tews Technologies TPMC465 Manuel utilisateur

Honeywell

Honeywell Excel 50 Manuel utilisateur

SeaLevel

SeaLevel COMM+8.LPCI Manuel utilisateur

Arturia

Arturia AUDIOFUSE STUDIO Manuel utilisateur

Rukra

Rukra RK-1240 Manuel utilisateur

Samson

Samson SCOM Manuel utilisateur

Dynacord

Dynacord DPS260 Manuel utilisateur

Nice

Nice Core Manuel utilisateur

Pyle Pro

Pyle Pro PSS8 Manuel utilisateur

RF-System

RF-System TinyGate Manuel d'utilisation et d'entretien