Alead ASTRHD5C2 Manuel utilisateur
Bluetooth Wireless
Stereo Transceiver
HD2/HDM2
ASTRHD5C2XXX
ASTRHD5C2MXX
P/N:
USER GUIDE
Declaration of Conformity.We declare that product
ASTRHD5C2XXX / ASTRHD5C2MXX conforms to
the R&TTE Directive 1999/5/RC.
FCC ID:
2ADC4NMSP3C2MTRX
0678
Stereo
Transceiver HD2/HMD2
USB charging cable
Optical(Toslink) cable Power adapter
Antenna
INTRODUCTION
This Bluetooth Stereo Transceiver, TRX_HD2
/TRX_HDM2 works with your home stereo as
Transmitter (Tx) to transmit or Receiver (Rx) to
receive music/audio wirelessly.
GETTING STARTED
Unpack the package carefully and confirm that you
have all of parts as shown below.
Please contact your local dealer immediately if
there are any shortages or damaged.
PRODUCT OVERVIEW
This Bluetooth Stereo Transceiver provides the
digital optical (Toslink), coaxial and analog 3.5mm
aux audio interface.
Audio Channel
Switch
Power
ON/OFF MultiLink TX/RX Switch
LEDs
TX Mode - Green
RX Mode - Blue
Power ON - Amber Optical - Orange
Coaxial - Yellow
Aux - Green
ANT DC INCOAXIAL AUX
DIGITAL
OPTICAL
AUDIO
INPUT
COAXIAL AUX
DIGITAL
OPTICAL
AUDIO
OUTPUT
ANT COAXIAL AUX
DIGITAL
OPTICAL
AUDIO
INPUT
OPTICAL
DC IN
AUX
AUDIO
INPUT
COAXIAL AUX
DIGITAL
OPTICAL
AUDIO
OUTPUT
ANT DC INCOAXIAL AUX
DIGITAL
OPTICAL
AUDIO
INPUT
COAXIAL AUX
DIGITAL
OPTICAL
AUDIO
OUTPUT
1. Install the Bluetooth antenna and power cord
2. Connect audio cable and audio input/output
SYSTEM SET UP
It is easy to set up the system. It needs to install the
antenna, power, connect desired audio input or
output, select audio cable, the desired transmitter
(Tx) or receiver (Rx) mode and device pairing.
2.1 Transmitter (Tx) – Connect audio input
For the transmit music/audio, connect audio
input optical (Toslink), coaxial or aux cable
between your TV, audio source and TRX_HD2
1
2
Transmitter (Tx):
BD/DVD player/S
et-top box
3.5’
TV
or or
COAXIAL AUX
AUDIO
OUTPUT
OPTICAL
L R
or or or
ANT COAXIAL AUX
DIGITAL
OPTICAL
AUDIO
INPUT
OPTICAL
Transmitter (Tx):
Select audio input channel
By touch the audio channel selection icon to select
audio input channel.
OPTICAL: Audio LED solid on with orange color
COAXIAL: Audio LED solid on with yellow color
AUX: Audio LED solid on with green color
2.2 Receiver (Rx) – Connect audio output
For the receiving music/audio, connect audio output
optical (Toslink), coaxial or aux cable between your
home stereo, speaker, receiver and TRX_HD2
COAXIAL
AUDIO
INPUT
AUX
AUDIO
INPUT
OPTICAL
AUDIO
INPUT
S
peaker
S
ound Bar
Receiver (Rx):
or
DC IN
AUX
AUDIO
INPUT
COAXIAL AUX
DIGITAL
OPTICAL
AUDIO
OUTPUT
COAXIAL AUX
AUDIO
INPUT
OPTICAL
L R
or or or
Select audio output channel
By touch the audio channel selection icon to
selected audio output channel
OPTICAL: Audio LED solid on with orange color
COAXIAL: Audio LED solid on with yellow color
AUX: Audio LED solid on with green color
Receiver (Rx):
COAXIAL
AUDIO
OUTPUT
AUX
AUDIO
OUTPUT
OPTICAL
AUDIO
OUTPUT
POWER ON
By touch the POWER icon to turn
on the unit, the Power LED will be
solid on with amber color .
SELECT DESIRED WORKING MODE – TRANS-
MITTER (Tx) OR RECEIVER (Rx) MODE
TRX_HD2 works with 2 different modes:
1. Transmitter (Tx): Transmit music/audio to
Bluetooth stereo speaker, receiver and
headphone..etc.
2. Receiver (Rx): Receive music/audio from iPods,
iPhones, iPads, Bluetooth MP3, music player, TV,
tablets, PCs, laptop, Mac.
By slide the mode
switch to select Tx
mode. Mode LED is
flashing with green
color.
By slide the mode
switch to select Rx
mode. Mode LED is
flashing with blue color.
Important Note: TRX_HD2 supports four sets of
pin code: 0000, 1111, 1234, and 8888. It covers the
most of popular speakers, receivers and
headphones.
1. Turn on the TRX_HD2. The Power LED solid on
with amber color and the Mode LED is quick
flashing with green color for pairing.
Transmitter (Tx): To pair and connect with
Bluetooth speaker, receiver, and headphone
devices
3. The TRX_HD2 will pair and connect it automati-
cally. The Mode LED will change to flash slowly with
green color.
PAIRING
2. Place the Bluetooth stereo speaker, receiver,
headphone into pairing state. Refer to the Bluetooth
stereo speaker, receiver, and headphone user
guide for instructions for this feature.
1. Turn on the TRX_HD2 and into Rx pairing state,
the Power LED solid on with amber color and Mode
LED is quick flashing with blue color.
Receiver (Rx): To pair and connect with iPods,
iPhones, iPads, tablets, android phones,
Bluetooth MP3, music player, TV, laptop, Mac
and PCs…etc
Table des matières
Autres manuels Alead Émetteur-récepteur
