Alcatel-Lucent OmniSwitch 10K Manuel utilisateur
060309-10, Rev. A
October 2010
OmniSwitch®10K
Getting Started Guide
Attention.
Only personnel knowledgeable in basic electrical and echanical procedures should install or aintain this equip ent.
The features and specifications described in this guide are subject to change without notice.
Copyright © 2010 by Alcatel-Lucent. All rights reserved. This docu ent ay not be reproduced in whole or in part
without the express written per ission of Alcatel-Lucent.
O niSwitch
®
,
Alcatel-Lucent
®
and the Alcatel-Lucent logo are registered trade arks of Alcatel-Lucent. WebView™
is a trade ark of Alcatel-Lucent.
Alcatel-Lucent
26801 West Agoura Road
Calabasas, CA 91301
(818) 880-3500 FAX (818) 880-3505
US Customer Support: (800) 995-2696
International Customer Support: (818) 878-4507
Internet: service.esd.alcatel-lucent.com
October 2010 iii
OmniSwitch 10K . . . . . . . . . . . . . . . . . . . . . . . . 1
Related Docu entation . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installing the Hardware . . . . . . . . . . . . . . . 3
Ite s Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Site Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Environ ental Require ents . . . . . . . . . . . . . . . . . . 3
Electrical Require ents . . . . . . . . . . . . . . . . . . . . . . 3
Unpacking and Installing the Switch . . . . . . . . . . . . . . . 4
Ite s Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Weight Considerations . . . . . . . . . . . . . . . . . . . . . . . 4
Lifting the Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Airflow Considerations . . . . . . . . . . . . . . . . . . . . . . 5
Mounting the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Rack Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Optional Rack-Mounting Hardware . . . . . . . . . . 6
Standalone (Non-Rack Mounted) Installations . . . . 6
Installing Chassis Co ponents . . . . . . . . . . . . . . . . . . . . 7
Blank Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installing CMM, CFM and NI Modules . . . . . . . . . . 7
Installing Transceivers . . . . . . . . . . . . . . . . . . . . . . . 8
Installing Fan Trays . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing Power Supplies . . . . . . . . . . . . . . . . . . . . . 9
Connections and Cabling . . . . . . . . . . . . . 11
Serial Connection to the Console Port . . . . . . . . . . . . . . 11
Serial Connection Default Settings . . . . . . . . . . . . . . . . 11
Ethernet Manage ent Port Cable Require ents . . . . . . 11
Booting the Switch . . . . . . . . . . . . . . . . . . . . . . 12
Co ponent LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Table of Contents
iv October 2010
Your First Login Session. . . . . . . . . . . . . . . 13
Logging In to the Switch . . . . . . . . . . . . . . . . . . . . . . . . 13
Setting IP Address Infor ation for the EMP . . . . . . . . 14
Unlocking Session Types . . . . . . . . . . . . . . . . . . . . . . . 15
Changing the Login Password . . . . . . . . . . . . . . . . . . . . 16
Setting the Syste Ti e Zone . . . . . . . . . . . . . . . . . . . 16
Setting the Date and Ti e . . . . . . . . . . . . . . . . . . . . . . . 16
Setting Optional Para eters . . . . . . . . . . . . . . . . . . . . . 17
Specifying an Ad inistrative Contact . . . . . . . . . . 17
Specifying a Syste Na e . . . . . . . . . . . . . . . . . . . 17
Specifying the Switch’s Location . . . . . . . . . . . . . . 17
Viewing Your Changes . . . . . . . . . . . . . . . . . . . . . . . . . 17
Saving Your Changes . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Using WebView . . . . . . . . . . . . . . . . . . . . . . . . . 18
Logging In to WebView . . . . . . . . . . . . . . . . . . . . . . . . 18
Navigating WebView . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Troubleshooting WebView . . . . . . . . . . . . . . . . . . . . . . 19
vOctober 2010
October 2010 OmniSwitch 10K 1
OmniSwitch 10K
OmniSwitch 10K Front Panel
The Alcatel-Lucent O niSwitch 10K (OS10K) is a high-
capacity, high-perfor ance odular Ethernet LAN switch
based on the state-of-the-art Alcatel Operating Syste (AOS).
The OS10K’s class-leading low-power consu ption, front-to-
back cooling, co pact for -factor, and all front-accessible
co ponents ake it a perfect fit for data center applications,
as well as a long-ter upgrade for legacy core platfor s.
2 OmniSwitch 10K October 2010
Related Documentation
The following user docu entation is provided for the
O niSwitch 10K.
•
OmniSwitch 10K Getting Started Guide
Describes the procedures for getting an O niSwitch
10K up and running. Also provides infor ation on
funda ental aspects of hardware co ponents and
basic setup co ands.
•
OmniSwitch 10K Hardware Users Guide
Technical specifications and procedures for the
O niSwitch 10K chassis, power supplies, fans,
Chassis Manage ent Modules (CMMs), Chassis
Fabric Modules (CFMs) and Network Interface (NI)
odules.
•
OmniSwitch CLI Reference Guide
Co plete reference to all CLI co ands supported on
the O niSwitch 10K. Includes syntax definitions,
default values, exa ples, usage guidelines, and
CLI-to-MIB variable appings.
•
OmniSwitch AOS Release 7 Switch anagement Guide
Includes procedures for readying an individual switch
for integration into a network. Topics include software
directory architecture, i age rollback protections,
authenticated switch access, anaging switch files,
syste configuration, SNMP, and WebView
anage ent software.
•
OmniSwitch AOS Release 7 Network Configuration
Guide
Includes network configuration procedures and
descriptive infor ation on all the ajor software
features and protocols included in the base software
package. Chapters cover Layer 2 infor ation (Ethernet
and VLAN configuration), Layer 3 infor ation
(routing protocols, such as RIP and VRRP), security
options (authenticated switch access), Quality of
Service (QoS), link aggregation, and server load
balancing.
•
OmniSwitch AOS Release 7 Advanced Routing
Configuration Guide
Includes network configuration procedures and
descriptive infor ation on advanced routing protocols
such as OSPF, BGP, DVMRP and PIM-SM.
•
OmniSwitch AOS Release 7 Transceivers Guide
Includes infor ation on S all For Factor Pluggable
(SFP) and 10 Gbps S all For Factor Pluggable
(SFP+) transceivers.
October 2010 Installing the Hardware 3
Items Required
•
Grounding wrist strap (included)
•
Phillips screwdriver
•
Flat-blade screwdriver
•
Serial cable
Site Preparation
Environmental Requirements
O niSwitch 10K switches have the following environ ental
and airflow require ents:
•
The installation site ust aintain a te perature
between 0° and 45° Celsius (32° and 113° Fahrenheit)
and not exceed 95 percent axi u hu idity (non-
condensing) at any ti e.
•
Be sure to allow adequate roo for proper air
ventilation at the front, back, and sides of the switch.
Refer to “Mounting the Switch” on page 5 for
ini u clearance require ents. No clearance is
necessary at the top or botto of the chassis.
Electrical Requirements
O niSwitch 10K switches have the following general
electrical require ents:
•
Each switch requires one grounded electrical outlet for
each power supply installed in the chassis.
O niSwitch 10K switches offer both AC and DC
power supply support. Refer to the OmniSwitch 10K
Hardware Users Guide for ore infor ation.
•
For switches using AC power connections, each
supplied AC power cord is 2 eters (approx. 6.5 feet).
Do not use extension cords.
Redundant AC Power. It is reco ended that each AC
outlet resides on a separate circuit. With redundant AC, if
a single circuit fails, the switch’s re aining power
supplies (on separate circuits) can re ain operational.
•
For switches using DC power, refer to the OmniSwitch
10K Hardware Users Guide for ore infor ation.
Installing the Hardware
4 Installing the Hardware October 2010
Unpacking and Installing the Switch
To protect your switch co ponents fro da age, read all
unpacking reco endations and instructions carefully before
beginning.
Unpack your O niSwitch 10K chassis as close as possible to
the location where it will be installed.
Items Included
Your O niSwitch 10K includes the following ite s:
•
O niSwitch chassis with factory-installed power
supplies, per order
•
CMM odule(s), per order
•
CFM odule(s), per order
•
NI odules, per order
•
Transceivers, per order
•
Blank cover panels, if applicable
•
Grounding wrist strap
•
RJ45-to-DB9 console adapter
•
Country-specific power cord(s)
•
Hard copy of the OmniSwitch 10K Getting Started
Guide
Weight Considerations
The e pty O niSwitch 10K chassis weighs approxi ately
46 lbs (21 Kgs). When fully populated (i.e., with co ponents
installed in all available chassis slots), the O niSwitch 10K
can weigh up to approxi ately 200 lbs (90.5 Kgs).
Lifting the Chassis
Lifting the chassis requires two people. When lifting, use the
recessed hand grip provided on the rear panel and the
reinforced area i ediately under the front air intake plenu .
Chassis Cross Section
Note. Lifting the O niSwitch 10K chassis i properly can
cause personal injury and/or da age to the unit.
Grip
Grip
Autres manuels pour OmniSwitch 10K
2
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Alcatel-Lucent Changer
Alcatel-Lucent
Alcatel-Lucent LambdaUnite 1675 Manuel utilisateur
Alcatel-Lucent
Alcatel-Lucent OmniSwitch 6400 Series Manuel utilisateur
Alcatel-Lucent
Alcatel-Lucent 7210 SAS E OS Manuel utilisateur
Alcatel-Lucent
Alcatel-Lucent 060321-10, Rev. B Mode d’emploi
Alcatel-Lucent
Alcatel-Lucent OmniSwitch 6250 Manuel d'installation
Alcatel-Lucent
Alcatel-Lucent OmniSwitch 6800 Series Manuel de programmation
Alcatel-Lucent
Alcatel-Lucent LambdaUnite 1675 Manuel utilisateur
Alcatel-Lucent
Alcatel-Lucent OmniAccess 4504 Manuel utilisateur
Alcatel-Lucent
Alcatel-Lucent OmniSwitch 6450 Manuel utilisateur
Alcatel-Lucent
Alcatel-Lucent 7210 SAS Series Manuel utilisateur
Alcatel-Lucent
Alcatel-Lucent 1850 TSS-160 Manuel utilisateur
Alcatel-Lucent
Alcatel-Lucent OmniSwitch 2220 Instructions d'installation
Alcatel-Lucent
Alcatel-Lucent OmniStack 6200 Manuel utilisateur
Alcatel-Lucent
Alcatel-Lucent OmniSwitch 6865-P16X Manuel utilisateur
Alcatel-Lucent
Alcatel-Lucent OmniSwitch AOS Release 7 Manuel utilisateur
Alcatel-Lucent
Alcatel-Lucent OmniSwitch 6850 Series Manuel utilisateur
Alcatel-Lucent
Alcatel-Lucent OmniSwitch 6850-48 Mode d’emploi
Alcatel-Lucent
Alcatel-Lucent 7450 ESS-7 Manuel utilisateur
Alcatel-Lucent
Alcatel-Lucent OmniSwitch 6850-48 Manuel de programmation
Alcatel-Lucent
Alcatel-Lucent 7210 Manuel utilisateur
Manuels Changer populaires d'autres marques
Ruijie
Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation
Altinex
Altinex DA1914SX Manuel utilisateur
MiLAN
MiLAN MIL-SM2401M Manuel utilisateur
RJM
RJM MASTERMIND PBC/6X Manuel utilisateur
Atlas
Atlas MMK-KVM8 Manuel utilisateur
Cabletron Systems
Cabletron Systems GIGAswitch GSR-16 Manuel utilisateur