General: 01905 823 298 | www.akw-ltd.co.uk6
6
USER CARE
User Care
Shower Seat Use
The shower seat must be used only for the task it is intended to perform.
Do not stand on it or misuse it. This may have serious detrimental effects on its performance
and safety. If any maintenance is required, it must be carried out by a competent installer.
It is advised that this product should be checked as part of a planned maintenance programme.
Children and other users may require supervision when using this product.
Keeping your AKW Shower Seat Clean
This product should be cleaned periodically to remove any accumulation of hair or other waste
material, using normal domestic bathroom cleaning materials. It is important to keep areas
such as seals and moving parts clear from build up of grime and water deposits to maintain
good working order.
Always rinse the shower seat with warm water. After cleaning, always ush down with water
then wipe thoroughly with a damp cloth to remove any cleaning material residues before
drying off.
Disinfecting
Where disinfecting is necessary, standard established procedures for disinfecting equipment
should be used with due care and attention taken of the warnings concerning possible effects
of aggressive chemicals on plastics.
Do not use strong or concentrated acidic, alkaline, or other cleaning materials on an abrasive
pad as these may discolour or damage the product. If more thorough cleaning is needed using
domestic cleaning products always test on a small area rst.
Packaging
Packaging should be disposed of in accordance with local recycling regulations.
Further information
These instructions are provided to advise the minimum standards of installation and
recommend what the best practice for the installation is. Therefore due to the very wide
variability of possible installation conditions, AKW cannot provide all circumstances for the
installation. AKW cannot accept any liability in connection with this information or its use.
This information is provided on the condition that the person receiving it shall make his/her
own tests to determine the suitability for his/her particular purpose. Failure to install this AKW
product in accordance with supplied instructions or the making of unauthorised modications
will invalidate any warranty and may affect product safety. None of the foregoing affects your
statutory rights.
