Akai AR321S Manuel utilisateur
第1 页共5 页
LOCATION OF CONTROLS
1. Power Button
2. Timer Button
3. Mode Button
4. Sound Button
5. Turning Control
6. Lamp Light Adjust
7. LCD Display
8. Turning Scale
9. Snooze/Sleep Button
10. Down/Temperature Mode Adjust Button
11. Up Button
12. Set Button
13. Lamp Button
14. Reset Button
15. AC Power Jack
16. FM Antenna
17. Battery Compartment
18. Speaker
19. AM/FM Wave Band
20. Temperature Antenna
RADIO OPERATION
1. Open battery compartment, insert 4pcs AA size batteries according to the
indicated direction, slide the battery cover back in position or plug the Power
Cord, and then the time will display. The display time is”12:00am, 1st January,
2009, Tuesday”.
2. Press POWER button to turn on the alarm, push wave band button to select
AM/FM, rotate the PVC button to select favorite radio station, press Up/Down
button to set desired listening level. Press POWER button again to turn off the
radio.
第2 页共5 页
NATURAL MUSIC OPERATION
1. Press SOUND button to enter into natural music mode , adjust VOLUME
control to proper volume; press Sound button again to turn off the music
2. Press SOUND button again to select different natural music, total 5musics for
selecting (1.Cricket 2.rain 3.river 4.bird 5.seagull and wave)
3. Under sound mode, press the Model button once to turn back to the time
display
LCD BACKLIGHT & LAMP LIGHT OPERATION
1. Press any button once, the backlight will light for 8seconds, then automatically
off
2. When it is alarm time or the radio is on or enjoy the natural music, backlight will
light for 8seconds and then automatically off.
3. Under any mode (except the alarm is on), press the LAMP button or rotate the
Lamp Light Adjust button to turn on the lamp
4. Press the Set button and Up/Down button to set desirable lighting time of the
lamp: 10MINUTES – 20MINUTES -30MINUTES ……
5. when the lamp is light, adjust Lamp Light button to your favorite brightness
6. Press the LAMP button or push the Lamp Light Adjust button to “zero” to turn
off the lamp.
7. If the brightness of the lamp was set to “zero”, when the alarm on, the lamp will
not light.
8. To prolong the battery use time, lamp just can be light when connect to AC
power
TIME/ ALARM OPERATION
1. TIME/ DATE ADJUST
1) Under normal mode, press SET button 3 seconds to 12/24 mode transfer
2) Under normal mode, Press SET button and UP/DOWN button to set the time in
order
(HOUR-MINUTE-YEAR-MONTH-DATE-NORMAL TIME DISPLAY)
第3 页共5 页
3) When just press SET button, it will be back to normal time display after
1minute.
4) Range of time: Year: 2000~2099; Month: 1~12; Date: 1~31; Hour: 1~12 or
0~23; Minute: 0~59
5) When setting the date, the week will change accordingly. When setting the year
and month, it will restraint the maximum day .when setting the minutes, the
seconds will clear to “zero”
6) Hold the UP/DOWN button ceaselessly can set time quickly
2．ALARM SETTING
1. Under time setting mode, press Mode button once to enter into Alarm 1 set
mode. Press Mode button twice to enter into Alarm 2 set mode. The “TIME
“show the alarm time , “WEEK “show the alarm output mode, “MONTH,
DATA” show the lighting time
2. Under alarm setting mode, press the SET button to the alarm setting, the
volume and lamp control function will turn off automatically and controlled by
the alarm setting. Press the Set button and Up/Down Button to set the following
function in order: Hour- Minute- Alarm Output Model-Brightness-Volume -
Lighting Time
3. Press any button to stop alarm or it will automatically stop alarming after 1
minute.
4. Under each mode, press Up/Down button to set desirable volume.
5. Press Up/Down button or rotate the Lamp Light Adjust button to adjust the
brightness.
6. Press the Set button and Up/Down Button to set the advanced lighting time of
the lamp: 0MINUTES –5MINUTES-10MINUTES-15MINUTES-20 MINUTES-25
MINUTES-30 MINUTES-45 MINUTES. The lamp will light up automatically
when it reaches the advanced lighting time before the alarm active.
7. Total 9 music for alarm output mode selecting: 6 natural music, “BeBeBeBe”
sound, radio(AM/FM)
第4 页共5 页
Notice:
A. Hold the UP/DOWN button ceaselessly can set time quickly
B. If the alarm time of the Alarm1 and Alarm2 is the same, only the Alarm 1
will work.
C. The volume of the alarm should not be less than 10.
D. When the alarm is on, the Alarm1 or Alarm 2 indicator will blink.
E. When the alarm is on, Press any button (except Snooze button) to turn off
the alarm.
F. The volume of the alarm must reach the target volume within 1 minute.
SNOOZE FUNCTION
When the first alarm, press SNOOZE button to snooze function (When it is radio
alarm, without snooze function), the snooze indicator will blink, and it will wake you
up again after9 minutes (totally alarm 10 times). If no actions is taken when alarm is
on, the music or buzzer will keep on for3minutes and shut off automatically, the
alarm will on again at the same time next day.
SLEEP FUNCTION
1. Press SLEEP button to sleep function
2. Press SLEEP button to set radio/music time: OFF –10MINUTES –
20MINUTES –30MINUTES–-40minutes–50minutes–-60minutes–-70minutes
–-80minutes –90MINUTES –OFF
3. When sleep function is on, sleep indicator will blink, no indicator when sleep
function is turn off
TIMER FUNCTION
1. Press the TIMER button to the timer setting mode.
2. Press SET button and Up/Down button to set the following function:
Time-Alarm Output Mode-Volume-Brightness-Lighting time.
3. Press the TIMER button again to turn off the timer function
4. Total 9 music for selecting, adjustable timer up to 99 hours.
第5 页共5 页
TEMPERATURE DISPLAY FUNCTION
Under temperature display mode, press DOWN C/F to transfer ℃/℉display.
BATTERY BACKUP
Insert 4pcs AA size batteries in the battery compartment. Should there be a power
failure, the clock will continue to function but the battery does not illuminate the lamp
SPECIFICATION
1. Frequency Range: FM:87.5～108.5MHz AM:530～1700KHz
2. Main Power Supply: AC 7.0V
3. External Power Supply: AC 120V～60HZ DC 7V～450Ma
4. Time display: 12/24 hour format
5. Battery backup: DC 6.0V
NOTICES:
1）When product with receiving problem or display is vague or sound is not
good, should change the battery
2）When product without use for long time, should take the battery out to
avoid affecting the product function
3）When product LCD display in disorder, please press RESET button
4）When product reset affected by hight voltage static and cause in disorder,
please press RESET button to reset.
5）Under any state, if no key was pressed it will be back to normal time
display after 30 seconds
6）If the Alarm, Timer and Sleep function occurs simultaneously, it will only
execute one of them according to the following order: ALM1- ALM2-Timer- Sleep.
7）It is a gradual process to turn on or off the volume and lamp, the system
will remember the last setting value, the power default of the volume and brightness
separately is “15”and “10”.if the last setting value is “0”, in order to make it work well,
the system will set volume and brightness to the power default automatically.
Table des matières
Autres manuels Akai Radio-réveil
Akai
Akai AR250M Manuel utilisateur
Akai
Akai ACR-3193 Manuel utilisateur
Akai
Akai AWBR-305 Manuel utilisateur
Akai
Akai ACR-3088 PORTABLE Manuel utilisateur
Akai
Akai ACI-6 Manuel utilisateur
Akai
Akai A61020 Manuel utilisateur
Akai
Akai ACR-1001 Manuel utilisateur
Akai
Akai AR150D Manuel utilisateur
Akai
Akai A61019 Manuel utilisateur
Akai
Akai AR130WE Manuel utilisateur
Akai
Akai AR-F360D Manuel utilisateur
Akai
Akai ACR-3899 Manuel utilisateur
Akai
Akai AR170D Manuel utilisateur
Akai
Akai ARC210 Manuel utilisateur
Akai
Akai CEU1300 Manuel utilisateur
Akai
Akai ARP-100 Manuel utilisateur
Akai
Akai AR270P Manuel utilisateur
Akai
Akai AR250P Manuel utilisateur
Akai
Akai AR175D Manuel utilisateur
Akai
Akai AKQI1113 Manuel utilisateur
