When connecting Button via ReX, note that Button does not automatically switch between the
radios networks of the radio signal extender and the hub. You can assign Button to another hub
or ReX manually in the app.
Connecting the button to the Ajax security
system
Prior to initiating connection
1. Follow the hub instructions to install the Ajax application. Create an account,
add a hub to the app, and create at least one room.
2. Enter the Ajax app.
3. Activate the hub and check your internet connection.
4. Ensure that the hub is not in armed mode and is not being updated by
checking its status in the app.
Only users with administrative rights can add a device to the hub
In order to connect a Button
1. Click on Add Device in the Ajax app.
2. Name the device, scan its QR code (located on the package) or enter it
manually, select a room and a group (if group mode is enabled).
3. Click Add and the countdown will begin.
4. Hold the button for 7 seconds. When the Button is added, the LEDs will
flash green once.
For detection and pairing, the Button must be located within the hub radio
communication zone (on the single protected object).
