AiSWEI 540-30101-01
_EN_
Quick Installation Guide
AiCom / AiCom WiFi
Note:
The sections marked with symbol "*" apply to the Aicom
WiFi.
You can download the user manual from the website
(www.aiswei-tech.com).
Aicom supports the following function:
⚫Active Power Limit
⚫0-export
⚫DRMs
Requirements:
◼DRMs cable maximum length is 1000 m.
◼The RS485 cable maximum length is 1000 m.
◼If you use a separate power supply unit for the
electricity supply, it must satisfy the following
requirements:
⚫EMC Directive and Low Voltage Directive of the
European Parliament
⚫Output voltage between 7.5 V and 12 V
⚫Output current at least 300 mA
Supported web browsers:
◼Google Chrome, version 23.0 or later
◼Mozilla Firefox, version 3.6 or later
◼Microsoft Internet Explorer, version 8 or later
1 Scope of Delivery
Power supply unit (optional)
2 Registering a PV Plant
Through the AisweiCloud, you can monitor PV system
online and read out inverter's operational data.
2.1 Download & Install App
Download App via scanning QR code.
2.2 Creating a User Account
Use the App to create a user account.
2.3 Creating a PV Plant
Log in to the AisweiCloud App to create a new PV
system.
Note: The serial number (SN), the registration Key
and the QR code are on the Aicom/Aicom WiFi's type
label.
2.4 Monitoring via web page
You can view power generation data and events in
the website (www.aisweicloud.com).
3Connecting the Aicom/Aicom WiFi
*3.1 Mounting the Antenna
3.2 Connecting Inverters
Requirements:
◼Shielded Ethernet cable (CAT 5 or higher)
◼Comply with the standards for structured cabling
according to EIA/TIA-568
◼Connected no more than five inverters
◼Connect the inverters to the Aicom/Aicom WiFi in a
daisy chain configuration.
3.3 Ethernet Connection
Requirements:
◼Your router's DHCP function is activated.
◼Connect the Aicom/Aicom WiFi with the router.
*3.4 WiFi Connection
WiFi communication overview
Requirements:
◼The AiCom WiFi is switched on.
1. Open your mobile device's WLAN page. The new
access point called AISWEI -**** is displayed.
Note: "****" stands for the last four digits in the serial
number.
2. Connect with the access point using your mobile
device and the password "aiswei2019".
3. Start the web browser and go to
http://160.190.0.1. The internal
website opens.
4. Select a router in the [Wireless]
area. The Password/Security Key
dialog box opens. Enter the
password of the router.
The status indicator on the WLAN page is green and the
WiFi LED is yellow. The AiCom WiFi is now connected
with the WLAN router.
5. Please change the WiFi password to ensure highest
security and prevent unauthorized access, refer to
manual for the process of password change (you can
download the manual from the website
www.aiswei-tech.com).
4Mounting the Aicom/Aicom WiFi
Requirements:
Aicom/Aicom WiFi must be installed indoors.
1. Select a suitable place for mounting.
2. Drill the holes (diameter: φ6 mm, depth: at least 30
mm).
3. Remove dust from drill holes.
4. Hammer wall plugs into holes.
5. Screw in the screws until they protrude by 5 mm.
6. Hang the Aicom/Aicom WiFi on the screws.
7. Tighten the screws. (Screwdriver type:PH2, torque:
2.0Nm)
