AirLive WLA-9000AP Manuel utilisateur

802.11 a/b/g Dual Radio Access Point

WLA-9000AP

English

Polski

Español

Deutsch

Česky

Português

日本語

Slovensky

Magyar

…………

................

….…….

............

…..………

……..

...………..

……..

.…….…..

English

802.11 a/b/g

Dual Radio Access Point

WLA-9000AP

English

Declaration of Conformity

We, Manufacturer/Importer

OvisLink Corp.

5F., NO.6, Lane 130, Min-Chuan Rd.,

Hsin-Tien City, Taipei County, Taiwan

Declare that the product

802.11 a/b/g Dual Radio Access Point

AirLive WLA-9000AP

is in conformity with

In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive

Clause Description

■ EN 301 893 v1.3.1 Broadband Radio Access Network(BRAN); 5GHz high

(2005-03) performance RLAN; Harmonized EN Covering essential

requirements of Article 3.2 of the R&TTE Directive.

■ EN 301 489-1 v1.6.1 Electromagnetic compatibility and Radio spectrum Matters (ERM);

(2005-09) Electromagnetic compatibility(EMC) standard for radio equipment and

■ EN 301 489-17 V1.2.1 Services; Part 17：Specific conditions for wideband data and

(2002-08) HIPERLAN equipment

■ EN 50371:2002 Generic standard to demonstrate the compliance of low power

Electronic and electrical apparatus with the basic restrictions related

to human exposure to electromagnetic field (10MHz – 300GHz)

-General public

■ EN 60950-1:2001/A11 Safety for information technology equipment including electrical

:2004 business equipment

■ CE marking

Manufacturer/Importer

Signature： ______________

Name ： Albert Yeh____

Position/ Title : Vice President

Date：2007/11/28 (Stamp)

English

802.11 a/b/g

Dual Radio Access Point

WLA-9000AP

Note on the FCC standard

This equipment has been tested and found to comply with the limits for a

Class B digital device pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interferences

when the equipment is operating in a commercial area. This equipment

generates, uses and may radiate radio frequency energy, and if not installed

in accordance with the user guide, may cause interference in the

transmission of radio communications. If operating in a residential area, it is

probable this equipment will cause harmful interference, in which case the

user will be required to try to correct this interference using his own means.

Note on CE Marking

This is a Class B product. In a residential area this product may cause radio

interference, in which case the user can be required to take the appropriate

measures. OvisLink Corp. hereby declares that AirLive WLA-9000AP meets

the basic requisites of directive 99/05/CE, and is therefore liable for the

accuracy of these data: OvisLink Corp.

5F, No.6 Lane 130,

Min-Chuan Rd, Hsin-Tien City,

Taipei, Taiwan

TEL: +886-2-2218-6888

Warranties

This product has undergone various quality controls to ensure proper

operation.

This product is covered by a two-year warranty for countries inside European

Union. For other countries, the warranty period is one year only. In the

event of any manufacturing fault or breakdown, it will be repaired by OvisLink

Corp. Please contact your supplier for details on the procedure to follow.

This warranty shall not be applicable in the event of damage caused by

improper use of the product, accidents, faulty handling or manipulation nor

any future incompatibility with third party products.

English

802.11 a/b/g

Dual Radio Access Point

WLA-9000AP

English

LED # Display Description

1 Power

Solid Green LED while the device is powered

on, either by power adaptor or PoE.

2 WLAN1

3 WLAN2

Solid Green LED while the device is powered

on. Blinking while there is Data transmission,

dark when this interface is turn off.

4 LAN 1

5 LAN 2

6 LAN 3

LAN ports status LED, Solid Green LED shows

when a port is actively connected, blinking

while there is data transmission, turns into dark

when this disconnected.

Fig 0-1. Front side LED of WLA-9000AP

Front LED

1 2 3 4 5 6

English

802.11 a/b/g

Dual Radio Access Point

WLA-9000AP

English

Port # Display Description

1 WLAN1

Detachable antenna with R-SMA connector. 2

indoor 2dBi antennas are delivered.

2 Power

Adaptor 5.5V 2.5A power supply adaptor delivered with

product.

3 RESET

Reset button for rebooting and reset device as

default facory value.

4 LAN 3/PoE

LAN port 3 and PoE port. It is also default WAN

port under gateway mode.

5 LAN 2

LAN port 2

6 LAN 1 LAN port 1

7 WLAN2 Detachable antenna with R-SMA connector.

Fig 0-2. Back side Port of WLA-9000AP

Back Ports

1 2 3 456 7

English

802.11 a/b/g

Dual Radio Access Point

WLA-9000AP

English

Configuration Steps



Please install your network cards first before the AP



Screw-in antennas (clockwise) into the Antenna connector



Connect the power and LAN cable to the back



Use your wireless card to do a site survey, default SSIDs are “AirLive1” and

“AirLive2” with channel “Auto” for both wireless interfaces.



If you need to change AP’s configuration, please follow the procedure

below:

The AP mode’s default IP address is 192.168.1.1. Please make

sure your computer IP is in the same subnet as the AP (i.e.

192.168.1.x)

Open the web browser and enter 192.168.1.1.

Enter the Password airlive.

Important Information



The AP mode’s default IP address is 192.168.1.1



The default Subnet Mask is 255.255.255.0



The default is set to Dual AP mode.



The default password is airlive



The default SSID is AirLive1 with channel “Auto” on WLAN1, AirLive2 with

channel “Auto” on WLAN2



The default DHCP client is Disabled

English

802.11 a/b/g

Dual Radio Access Point

WLA-9000AP

Setu

Wizard



There are 3 feature in the Setup Wizard :

Time Setting

Device IP Setting

Operational Mode



Time Settings allows to set NTP or to use the time setting of connected

computer.



Please change IP by selecting the IP under the tab page of “Device IP

Settings”



To change operational mode, please go to Setup Wizard and click on

“Operational Mode”, select desired operation mode and click on “APPLY” to

validate.



After reboot, the device changes its operation mode as selected

configuration, the parameter display changes according to Operational

Mode.



Each wireless interface of any operational mode can be configured

separately. In following sections, each mode is presented under a single

interface, which is applicable for all operational modes.

English

802.11 a/b/g

Dual Radio Access Point

WLA-9000AP

In an operational mode with wireless

Interface set as AP mode:

zEnable the interface (Enable by default).

zDefine a SSID for this interface.

zSelect the WLAN mode and the channel

zIf you need extra configuration of Security, advance setting and access

control, please refer to the user’s manual for further information.

zPress “APPLY” button. The device will save and apply modification.

AP Mode Configuration

English

802.11 a/b/g

Dual Radio Access Point

WLA-9000AP

zClient can search for the

SSIDs of APs in the

environment using site

survey tool.

zChoose first the spectrum

as “Mode”

zSelect the AP to make

connection with “Site

Survey”. Button.

zTo connect with an AP

with Site Survey, select

desired SSID from result

list, click on associate

button and add

encryption if necessary.

Client Mode Configuration

WDS Bridge Mode Configuration

WDS bridge mode use MAC

use WDS bridge mode, please

note the MAC ID of device to

EACH OTHER.

zUnder WDS mode

wireless interface, click

on the “Setup” button

next to “WDS Settings”

zA pop-up window

appears (shown as on

next page), with the field

to insert MAC ID of a

remote node of another

device.

zGive name, MAC addess

in order to create a WDS

bridge node. Add

Security Policy if

required.

English

802.11 a/b/g

Dual Radio Access Point

WLA-9000AP

zOn the remote node

device, register MAC

ID of the original point.

If there is mistake on

MAC ID address, the

link will not be

established, please

check carefully the

MAC ID and test before

filed deployment.

zTo delete node

information, please

check the radio button

of target node; then

click on “DELETE

SELECTED” button.

zReturn to main page,

the registered node

information appears on

the page.

By default, the AP is set to 802.11g/b mode, running in 2.4GHz

spectrum. If you want to run it in 802.11a mode, you need to change

the settings. The AP cannot run in both 802.11a and 802.11g modes

simultaneously.

Select 802.11a, b, or g mode

1. Open your web browser and enter the AP’s IP address.

2. Under each interface of any operational mode, select Wireless

Setting on the left side

English

Autres manuels pour WLA-9000AP

Table des matières

Langues :

Autres manuels AirLive Point d'accès sans fil

AirLive

AirLive WL-5450AP Manuel utilisateur

AirLive

AirLive N.MINI Manuel utilisateur

AirLive

AirLive WIAS-1200G Manuel utilisateur

AirLive

AirLive WT-2000AP Manuel utilisateur

AirLive

AirLive WLA-5200AP Manuel utilisateur

AirLive

AirLive WL-5460AP v2 Manuel utilisateur

AirLive

AirLive WT-2000AP Manuel utilisateur

AirLive

AirLive AirMax5X II Manuel utilisateur

AirLive

AirLive AC.TOP Manuel utilisateur

AirLive

AirLive AIRLIVE WL-5430AP Manuel utilisateur

AirLive

AirLive AP60-EU Manuel utilisateur

AirLive

AirLive WL-5460AP v2 Manuel utilisateur

AirLive

AirLive WMU-6000FS Manuel utilisateur

AirLive

AirLive WL-5460APv2 Guide d'installation

AirLive

AirLive WL-5460AP Manuel utilisateur

AirLive

AirLive AP60 Manuel utilisateur

AirLive

AirLive WH-5400CPE Manuel utilisateur

AirLive

AirLive WLA-5000AP Manuel utilisateur

AirLive

AirLive Air Live WL-5470AP Manuel utilisateur

AirLive

AirLive WL-5460AP Manuel utilisateur

AirLive

AirLive AirLive WMU-6500FS Manuel utilisateur

AirLive

AirLive AirMax5N/ESD Manuel utilisateur

AirLive

AirLive N.TOP Manuel utilisateur

AirLive

AirLive WL-5450AP Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur