AirLive WL-1100AP Guide de configuration

How to Setup Bridge Function

All AirLive WL-1100AP is capable of performing Bridge function. Bridge is used to link two or more LANs together

wirelessly. Once the AP is in bridge mode, the AP's access point function is ceased. That means no wireless cards can

connect to AP anymore.

To connect 2 bridges together, we should use point to point connection. To connect 3 or more bridges together, we need 1 AP

to act as the multipoint center. Please follow the instruction below:

Connect 2 Bridges Together (Point to Point):

Environment:

Computer A & Bridge B are in building 1. Computer D & Bridge C are in building 2.

Procedure:

1. On computer A, open the SNMP utility. Get into the Bridge B. Select Administrator and enter "public" as

password. From the menu Setup->Wireless LAN->Operational Setting->Advance: check "Bridge, Point to Point

function." Enter Bridge C's MAC address in the "remote bridge MAC address" field.

2. On computer D, open the SNMP utility. Get into the Bridge C. Check Setup->Wireless LAN->Operational

Setting->Advance: Bridge, Point to Point function. Enter Bridge Bs MAC address in the "remote bridge MAC

address" field.

3. Both bridges must use the same channel and ESSID

4. Bridges and computers on both side of the building must be in the same subnet.

*Note: If you don't see the "Advance" option in the "Operational Setting" menu, please click here to download the Bridge Utility.

Please remember that it's better for two bridges to be on the same floor, facing each other through the windows so the signal is

strong enough for stable transmission.

Connecting 3 or more Bridges together (multipoint):

Environment:

Computer A & Bridge B are in building 1. Bridge E in Building 2. Computer D & Bridge C are in building 3.

Procedure:

1. On computer A, open the SNMP utility. Get into the Bridge B. Select Administrator and enter "public" as

password. From the menu Setup->Wireless LAN->Operational Setting->Advance: check "Bridge, Point to Point

function." Enter Bridge E's MAC address in the "remote bridge MAC address" field.

2. Connect a computer to Bridge E. Open the SNMP utility. Get into the Bridge E. Select Administrator and enter

"public" as password. From the menu Setup->Wireless LAN->Operational Setting->Advance: check "Bridge, Point to

MultiPoint function."

3. On computer D, open the SNMP utility. Get into the Bridge C. Check Setup->Wireless LAN->Operational

Setting->Advance: Bridge, Point to Point function. Enter Bridge E's MAC address in the "remote bridge MAC

address" field.

4. All bridges must use the same channel and ESSID

5. All bridges and computers on must be in the same subnet.

*Note: If you don't see the "Advance" option in the "Operational Setting" menu, please click here to download the Bridge Utility.

Please remember that it's better for all bridges to be on the same floor, facing each other through the windows so the signal is

strong enough for stable transmission.

Table des matières

Autres manuels AirLive Point d'accès sans fil

AirLive

AirLive WL-5450AP Manuel utilisateur

AirLive

AirLive WMM-3000AP Manuel utilisateur

AirLive

AirLive WLA-5000AP Manuel utilisateur

AirLive

AirLive N.TOP Manuel utilisateur

AirLive

AirLive AirMax5N Manuel utilisateur

AirLive

AirLive WH-9100MESH Manuel utilisateur

AirLive

AirLive WLA-5200AP-G Manuel utilisateur

AirLive

AirLive WHB-5854A Manuel utilisateur

AirLive

AirLive AirLive WMU-6500FS Manuel utilisateur

AirLive

AirLive AirMax5N/ESD Manuel utilisateur

AirLive

AirLive WLA-5000APv2 Manuel utilisateur

AirLive

AirLive WHA-5500CPE Manuel utilisateur

AirLive

AirLive wl-5460apv2 Manuel utilisateur

AirLive

AirLive WIAS-1200G Manuel utilisateur

AirLive

AirLive WLA-5000AP Manuel utilisateur

AirLive

AirLive WLA-5200AP Manuel utilisateur

AirLive

AirLive AC-1200UR Manuel utilisateur

AirLive

AirLive AAP-2405g Manuel utilisateur

AirLive

AirLive AIRMAX5 Manuel utilisateur

AirLive

AirLive WL-5470POE Manuel utilisateur

AirLive

AirLive WLA-9000AP Manuel utilisateur

AirLive

AirLive WLA-5000AP Manuel utilisateur

AirLive

AirLive WH-5400CPE Manuel utilisateur

AirLive

AirLive AirMax5X II Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur