Airlink101 AWLL6077 Manuel utilisateur

Quick Installation Guide

Wireless N USB Adapter

Model # AWLL6077

Install Utility Software

This Quick Installation Guide only provides the basic installation instructions.

For detailed installation instructions on advanced features, please refer to the

User’s Manual that can be found on the provided CD.

Step 1.1 Insert the USB adapter into an available USB port of your computer.

Step 1.2

Windows 2000/XP Users:Windows will launch the Found New Hardware

Wizard. The Found New Hardware Wizard appears differently depending on

your computer operating system, click Cancel to quit the wizard and insert the

Installation CD in the CD drive. Continue to Step 1.3.

Section 1

Ver. 1.0

Package Contents:

•Wireless N USB Adapter

•USB Cable

•Driver & Utility CD

•Quick Installation Guide

Windows Vista Users:Windows will install its built in drivers for this adapter.

Give permission to Windows to install the device driver software. After you see

the Windows message ‘Device driver software installed successfully’, insert the

Installation CD into the CD drive.

Step 1.3 The Autorun screen will pop up. Select Install Utility and Driver from

the menu.

Note: If the Autorun screen doesn’t appear automatically go to Start, Run, and

type D:\Utility\Setup.exe (where D is the letter of your CD drive) and click OK.

Windows Vista Users:When you get warning message(s), make sure that you

give permission to continue with the installation of the driver software.

Step 1.4 The Airlink101 WLAN Monitor screen will popup. Click Next at the

screen.

Step 1.5 Click Install to begin the installation.

Step 1.6 Give Permission to Window to install the driver software

For Windows Vista, click the Install this driver software anyway.

For Windows XP click Continue Anyway at the Windows Logo Screen.

For Windows 2000, click Yes at the Digital Signature Not Found prompt.

Windows will give you a popup message telling you it is installing the

AirLink101 Wireless device driver and the Airlink101 Wireless Monitor.

Step 1.7 Click Finish to complete the installation.

Configure the Wireless Adapter

Open the Airlink101 Wireless Monitor utility by double clicking on the Airlink101

Wireless Monitor Utility icon in the system tray at the bottom right-hand corner

of your screen.

Windows Vista will show:

Continue to Step 2.1

Section 2 Windows XP will show:

The Airlink101 Wireless Monitor of Windows XP gives you an option to Start or

Stop the Wireless Zero Configuration. It is not recommended to check this

Windows Zero Config box, if it is checked, you will be using the XP’s wireless

utility instead of the Airlink101 Wireless Monitor utility to monitor the connection.

Step 2.1

The Wi-Fi Protected Setup™ (WPS) is a new and easy way to configure the

encryption for your wireless network clients. In order to use it, you need to have

a router that supports this feature. If your router doesn’t support WPS, continue

to Step 2.2.

1. Push the WPS button of the Adaptor.

The ‘Wi-Fi Protected Setup – PBC method’ window will popup to

acknowledge you the Adapter is starting to establish a connection.

2. Push the WPS button of the Router. The picture shows Airlink101 AR670W

router.

3. The router will now start the handshake with the wireless Adapter. The

connection will be established in 2 minutes. Continue to Step 2.4.

If the connection is not able to establish, continue to Step 2.2.

Step 2.2 Click the Available Network tab of the Wireless Monitor, select the

SSID (Network Name) of the wireless network that you wish to connect to, and

click Add to Profile.

If the network that you are attempting to connect does not have encryption

enabled, you will receive a warning about connecting to an unsecured network.

Click OK to complete the connection. Go to Step 2.3.

If the network that you are attempting to connect is configured for encryption,

the Wireless Network Properties window will appear:

The Adapter may automatically detect the Network Authentication and the Data

encryption. You need to enter the security settings in the appropriate boxes

according to the settings of the router and then click OK to connect.

Please refer to the User’s Manual on the provided CD for instructions on

configuring the wireless network security settings.

Step 2.3 The connection is now established. Click on the Wireless Monitor

utility icon to check the status of the connection. The Status should be

Associated, and there will be green bars next to Signal Strength and Link

Quality.

Troubleshooting

If you are experiencing problems with the connection (unable to connect, low

signal strength, slow connection speed, not working, unstable wireless

connection) you may want to tune your router’s signal by changing the

channels on the router and/or by adjusting the direction of the antenna(s).

You do not need to change the channel on the Adapter; it will automatically pick

up the new channel after you reboot the router.

Your router has 11 different channels to choose from. Start from channel 1 and

work your way up. Each time you change the channel on the router, make sure

that you restart the computer that is connected to the router before trying to

connect again. Keep going through the channels until you find one that gives

you a stable connection.

For instructions on changing channels, refer to the documentation that comes

with the router.

Technical Support

E-mail: support@airlink101.com

Toll Free: 1-888-746-3238

Website: www.airlink101.com

*Theoretical maximum wireless signal rate derived from IEEE standard 802.11g and draft 802.11n specifications.

Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic,

building materials and construction, mix of wireless products used, radio frequency interference (e.g., cordless

telephones and microwaves) as well as network overhead lower actual data throughput rate. This product is

based on IEEE draft 802.11n specification and is not guaranteed to be compatible with future versions of IEEE

802.11n specification. Compatibility with draft 802.11n devices from other manufactures is not guaranteed.

Specifications are subject to change without notice. Photo of product may not reflect actual content. All products

Section 3

Autres manuels pour AWLL6077

Table des matières

Autres manuels Airlink101 Adaptateur

Airlink101

Airlink101 AGIGACB Manuel utilisateur

Airlink101

Airlink101 AWLC3026 Manuel utilisateur

Airlink101

Airlink101 AWLL5025 Manuel utilisateur

Airlink101

Airlink101 AWLL5025 Manuel utilisateur

Airlink101

Airlink101 AWLC5025 Manuel utilisateur

Airlink101

Airlink101 ABT-U200 Manuel utilisateur

Airlink101

Airlink101 AWLL5166HP Manuel utilisateur

Airlink101

Airlink101 USB 2.0 Ethernet Adapter ASOHOUSB Manuel utilisateur

Airlink101

Airlink101 AWLL6077V2 Manuel utilisateur

Airlink101

Airlink101 AWLL4030 Manuel utilisateur

Airlink101

Airlink101 ABT-U200 Manuel utilisateur

Airlink101

Airlink101 Golden N AWLL6075 Manuel utilisateur

Airlink101

Airlink101 ASOHORL Manuel utilisateur

Airlink101

Airlink101 AWLL5055 Manuel utilisateur

Airlink101

Airlink101 AWLL6086 Manuel utilisateur

Airlink101

Airlink101 AWLC4130 Manuel utilisateur

Airlink101

Airlink101 AWLL5088 Manuel utilisateur

Airlink101

Airlink101 AWLL6070 Manuel utilisateur

Airlink101

Airlink101 ASOHOUSB Manuel utilisateur

Airlink101

Airlink101 AWLL5055 Manuel utilisateur

Airlink101

Airlink101 ATVUSB01 Manuel utilisateur

Airlink101

Airlink101 AWLL6090 Manuel utilisateur

Airlink101

Airlink101 AWLC5025 Manuel utilisateur

Airlink101

Airlink101 AWLL5088V2 Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur

RCA

RCA AH57R Manuel utilisateur