Airlink101 AWLL5077 Manuel utilisateur

Quick Installation Guide

Golden 150 Wireless Mini USB Adapter

Model # AWLL5077

Install the Wireless USB Adapter

This Quick Installation Guide only provides the basic installation instructions.

For detailed instructions of other advanced features, please refer to the User’s

Manual that can be found on the provided CD.

For Macintosh users, you can find the software and installation instructions for

MAC 10.4, 10.5 under the MAC folder on the provided CD.

Step 1.1 Insert the USB adapter into an available USB port of your computer.

Step 1.2 Click Cancel when you see the Found New Hardware Wizard.

Section 1

Ver. 1.0

Package Contents:

•Golden 150 Wireless Mini

USB Adapter

•Driver & Utility CD

•Quick Installation Guide

Windows XP/2000 Users:

Windows Vista Users:

Step 1.3 Insert the Installation CD in the CD drive. The Autorun screen will pop

up. Select Install Utility and Driver from the menu.

Note: If the Autorun screen doesn’t appear automatically, go to Start, Run, and

type D:\Utility\Setup.exe (where D is the letter of your CD drive) and click OK.

Windows Vista Users:When you get warning message(s), make sure that you

give permission to continue with the installation of the driver software.

Step 1.4 The Airlink101 WLAN Monitor screen will popup. Click Next at the

screen.

Step 1.5 Click Install to start the installation.

Step 1.6 For Windows XP, click on Continue Anyway.

For Windows Vista: click on Install this driver software anyway.

Please wait when Windows is installing the driver for Airlink101 Wireless Adapter

and the utility, Airlink101 Wireless Monitor.

Step 1.7 Click Finish to complete the installation.

Step 1.8 Select Yes, I will restart my computer now. Click Finish to

complete the installation.

The driver and utility have been installed. Please continue to Section 2.

Connect to Wireless Network

For Windows 7 Users:

You will need to use the utility built in Windows 7 to manage this wireless USB

adapter. Currently, Airlink101 Wireless Monitor does not support Windows 7.

Step 2.1 Click on the wireless icon in the system tray at the bottom right-hand

corner of your screen. A list of available network will pop up. Select the one you

want to connect to and click Connect.

Step 2.2 Enter the network security key if the wireless network you are

attempting to connect to has wireless encryption enabled. Click OK. The

connection should be now established.

Section 2

For Windows Vista/XP/2000 Users:

Step 2.1 Open the Airlink101 Wireless Monitor utility by double clicking on the

icon in the system tray at the bottom right-hand corner of your screen.

Step 2.2

The Easy Setup Button (Wi-Fi Protected Setup) is a new and easy way to

configure the encryption for your wireless network clients. In order to use it, you

need to have a router that supports this feature.

Note: If your router doesn’t support Easy Setup Button function (Wi-Fi

Protected Setup), please go to Step 2.3.

1. Push the Easy Setup Button of the Adapter until you see the following

window pops up on the monitor.

This window pops up to acknowledge you the wireless adapter is starting to

establish a connection.

2. Within the following 2 minutes, push the Easy Setup Button (WPS Button)

on the back of the Router. The picture shows Airlink101 AR570W Wireless

150 Router.

3. The router will now start to synchronize the encryption settings with the

wireless adapter. The connection will be established in few seconds.

Continue to Step 2.5.

If the connection is unable to establish, continue to Step 2.3.

Step 2.3 Click the Available Network tab of the Wireless Monitor, select the

wireless network that you wish to connect to, and click Add to Profile.

If the network that you are attempting to connect does not have encryption

enabled, you will receive a warning about connecting to an unsecured network.

Click OK to complete the connection. Go to Step 2.5.

Step 2.4 Enter the wireless security key into the Network Key and Confirm

Network Key boxes. Click OK.

The wireless adapter will automatically detect the type of Network

Authentication and the Data encryption. All you need to do is to enter the

Network Key in the appropriate boxes according to the settings of the wireless

router and click OK to connect.

Step 2.5 The connection should be now established. Under the utility

Airlink101 Wireless Monitor, go to General tab to check the status of the

connection. Verify that IP Address, Subnet Mask and Gateway have valid

numbers assigned to them (instead of all 0’s). The Status should be Associated,

and there should be green bars next to Signal Strength and Link Quality.

Congratulations! You have now connected to the wireless network

successfully.

1. If you cannot open the wireless monitor utility, make sure that the USB

adapter is inserted firmly into the USB port.

2. If you cannot connect to the wireless router, you may want to double check

the wireless security settings on the router. The network key you entered in

Step 2.4 must match with the settings on the wireless router.

3. If you are experiencing problems with the connection such as low signal

strength, slow connection speed, or unstable wireless connection, you can try

to tune your router’s signal by changing the channels on the router and/or by

adjusting the direction of the antenna(s). You do not need to change the

channel on the Adapter; it will automatically pick up the new channel after you

reboot the router. Your router has 11 different channels to choose from. Keep

going through the channels until you find one that gives you a stable connection.

For instructions on changing channels, refer to the documentation that comes

with the router.

Technical Support

E-mail: support@airlink101.com

Toll Free: 1-888-746-3238

Website: www.airlink101.com

*Theoretical maximum wireless signal rate derived from IEEE standard 802.11g and draft 802.11n specifications.

Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic,

building materials and construction, mix of wireless products used, radio frequency interference (e.g., cordless

telephones and microwaves) as well as network overhead lower actual data throughput rate. This product is

based on IEEE draft 802.11n specification and is not guaranteed to be compatible with future versions of IEEE

802.11n specification. Compatibility with draft 802.11n devices from other manufactures is not guaranteed.

Specifications are subject to change without notice. Photo of product may not reflect actual content. All products

Section 3

Troubleshooting

Autres manuels pour AWLL5077

Table des matières

Autres manuels Airlink101 Adaptateur

Airlink101

Airlink101 AWLC3026T Manuel utilisateur

Airlink101

Airlink101 AGIGAUSB Manuel utilisateur

Airlink101

Airlink101 AWLC6070 Manuel utilisateur

Airlink101

Airlink101 APL8511 Manuel utilisateur

Airlink101

Airlink101 AWLC3026 Manuel utilisateur

Airlink101

Airlink101 AWLL5077 Manuel utilisateur

Airlink101

Airlink101 AWLL6077V2 Manuel utilisateur

Airlink101

Airlink101 AFEP100 Manuel utilisateur

Airlink101

Airlink101 AWLC3026 Manuel utilisateur

Airlink101

Airlink101 Golden N AWLL6075 Manuel utilisateur

Airlink101

Airlink101 AWLL5055 Manuel utilisateur

Airlink101

Airlink101 ASOHORL Manuel utilisateur

Airlink101

Airlink101 ATVUSB01 Manuel utilisateur

Airlink101

Airlink101 AWLC6070 Manuel utilisateur

Airlink101

Airlink101 AWLL3026 Manuel utilisateur

Airlink101

Airlink101 AGIGACB Manuel utilisateur

Airlink101

Airlink101 ATVUSB01 Manuel utilisateur

Airlink101

Airlink101 APL8511 Manuel utilisateur

Airlink101

Airlink101 AWLC4130 Manuel utilisateur

Airlink101

Airlink101 USB 2.0 Ethernet Adapter ASOHOUSB Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

Airlink101

Airlink101 AWLL5088 Manuel utilisateur

Airlink101

Airlink101 AWLL6090 Manuel utilisateur

Airlink101

Airlink101 AWLL5025 Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur

RCA

RCA AH57R Manuel utilisateur