4 - Instruction Manual aircom.it
HT series
EN
WARNINGS
MAINTENANCE AND
CLEANING
MAINTENANCE
CORROSIVE PRODUCT
WARNINGS
CLEANING
HEALTH HAZARD
Before any maintenance work, empty
the gun and disconnect it from both,
the compressed air supply, and the
liquid supply. Use only original AIRCOM®
accessories, spare parts, and related
components: any other product not
supplied by AIRCOM® is not approved or
authorized. AIRCOM® is not liable for any
damage caused by using non-original
spare parts and accessories.
Our guns can be used with the
majority of water, or solvent-based
pigments for coating and finishing all
types of surfaces. However, they are
not designed to spray abrasive and/or
corrosive products. If abrasive and/or
corrosive products are used, guns with
components made of the appropriate
material can be ordered.
Use exclusively appropriate liquid
cleaners with neutral pH 6-8. Do not use
acids, alkaline solutions or other
cleaning agents containing sodium
hydroxide, which are aggressive for
cleaning the exterior of the gun. Do not
immerse the gun in liquid cleaners that
may cause corrosion of the product.
Clean all material passages by
propagating water within the paint
circuit: inadequate cleaning can cause
damages to the fan shape. While
cleaning, avoid scratching the surfaces
of the air nozzle holes and the dipstick.
Some chemicals, once sprayed, may be
harmful and cause irritation or health
disorders. Careful reading of all labels
and instructions on how to use the
product are necessary. Use of the
product is restricted to trained
technical personnel, with the use of
special safety glasses when adjusting
the gun and, while the system is
operating.
