Aiphone KBW-M Manuel utilisateur

- INSTRUCTIONS -

The KBW-M adaptor converts a standard CCTV camera's signal to a 2-wire signal, compatible with the

KB 3x5 Color Video system. This allows the utilization of a color camera on a video input on the KB

system, viewable from any monitor in the system. (A camera and KBW-M can be added to any input

that is not used by a KB-DAR video door station.)

KBW-M

Video Modulator for the KB Series Color Video System

KBW-M TERMINAL DEFINITIONS:

BNC Connector: Coax input from CCTV camera

A1 2-Wire output to

A2 KB-3MRD

MD Input from motion detector

MD (with normally open contacts)

Special

Order

Products

CCTV Camera

75 Ohm, 1V Peak-to-peak

(Independently powered)

1A1

1A2

2A1

2A2

3A1

3A2

KB-3MRD

KB-DAR

BNC

Cnctr

KBW-M

PS-2420UL

Pg. 1

KB-DAR

NOTES:

1. In this system example, the CCTV camera

is on input #3. Cameras are viewed by

pressing the MONITOR button (on any

monitor.) Press once to turn on camera 1

(KB-DAR), press again to switch to camera 2

(KB-DAR #2). Pressing MONITOR a third

time will switch to Camera 3 (CCTV), and a

fourth time turns the monitor off.

2. OPTIONAL: An input for a motion detector

is provided to activate the CCTV camera.

The Monitor will turn on and a chime will be

heard. The monitor will stay on for

approximately 30 seconds.

KBW-M

Motion Detector*

Non-Polarized

WIRING DIAGRAM: KBW-M Modulator for Standard CCTV camera

(Optional)

Non-Polarized

Camera

input

Output to

KB-3MRD

Input from Motion

Detector

* Or any signaling

device that provides a

normally open

momentary dry closure.

Motion Detectors with N/O Contacts:

Detection Systems DS720I

Pulnix 6612

Intellisense 8140S

Ademco 1998PI

Sentrol AP750

Aiphone Communication Systems

1700 130th Ave. N.E.

Bellevue, WA 98005

(425) 455-0510

FAX (425) 455-0071

Toll Free Technical Support:

1-800-692-0200

FAX: 1-800-832-3765

E-mail [email protected]

Pg. 2

KBW-M Instr.

0703bkjs

OPERATIONS

Activation of a camera from a Monitor:

1. The CCTV camera can be viewed on any of the KB monitors in the system by pressing the MONITOR button.

2. The video door stations and/or camera(s) will come up sequentially based on the inputs that they are on. (One

press of MONITOR button brings up camera 1, second press brings up camera 2, third press brings up

camera 3.)

3. After the last camera in the system is activated, the next press of the MONITOR button will turn off the

monitor. If the monitor is left on, it will automatically time out after approximately 30 seconds.

Activation of a camera by the motion detector: (Optional feature)

Any motion detector with a normally open contact can be connected to the KBW-M to activate the CCTV camera.

1. When the motion detector is tripped, the camera will turn on and be viewed on all KB monitors in the system.

2. A chime will be heard, and the appropriate LED will be lit on the monitor(s).

Door 1: 4-Stroke Chime and LED #1

Door 2: 2-Stroke Chime and LED #2

Door 3: 8-Stroke Chime and LED #3

3. The camera will automatically turn off in 30 seconds.

SPECIFICATIONS:

Power: Supplied by KB-3MRD

CCTV Camera input: 1V Peak-to-Peak at KBW-M

Connector: BNC Connector

Wire: Aiphone wire #871802

18AWG, 2-conductor solid, non-shielded, FPLR type

Wiring distance: (With Aiphone # 871802 wire)

Max. 650' from KBW-M to KB-3MRD

Dimensions: 5-1/2"H x 3"W x 1-1/2"D

Note:

Only information pertaining to the connection and operation

of the KBW-M and connection of a color CCTV camera is

included here. For complete installation, wiring, and

operational information about the KB system, please refer

to the KB-3MRD Installation Manual.

Table des matières

Autres manuels Aiphone Système d'interphone

Aiphone

Aiphone IS SERIES Manuel utilisateur

Aiphone

Aiphone AT-306 Manuel utilisateur

Aiphone

Aiphone IC-DC Manuel utilisateur

Aiphone

Aiphone LA-B Manuel utilisateur

Aiphone

Aiphone GFW-VBC Manuel utilisateur

Aiphone

Aiphone JA-D Manuel utilisateur

Aiphone

Aiphone LEF-LD Manuel utilisateur

Aiphone

Aiphone LDF-20C Manuel utilisateur

Aiphone

Aiphone LEF Series Manuel utilisateur

Aiphone

Aiphone AN-8031MS Manuel utilisateur

Aiphone

Aiphone TC-MB Manuel utilisateur

Aiphone

Aiphone MK-DS Manuel utilisateur

Aiphone

Aiphone LEF-3C Manuel utilisateur

Aiphone

Aiphone AN-8031MS Manuel utilisateur

Aiphone

Aiphone HM-7 Manuel utilisateur

Aiphone

Aiphone JF Manuel utilisateur

Aiphone

Aiphone GT-2C Manuel utilisateur

Aiphone

Aiphone GF System Manuel utilisateur

Aiphone

Aiphone IX-DVF-PR Manuel utilisateur

Aiphone

Aiphone IX-MV Manuel utilisateur

Aiphone

Aiphone LS-NVP Manuel utilisateur

Aiphone

Aiphone LEM-1DL/C Manuel utilisateur

Aiphone

Aiphone MY-CB Manuel utilisateur

Aiphone

Aiphone DL-10 Manuel utilisateur

Manuels Système d'interphone populaires d'autres marques

Bticino

Bticino LINEA 3000 Manuel utilisateur

MSI

MSI MSI-140 Manuel utilisateur

golmar

golmar Stadio Plus Manuel utilisateur

CyberData

CyberData 011211 series Manuel

Vidos

Vidos duo M1021 Manuel utilisateur

Vimar

Vimar ELVOX 7539/E Manuel utilisateur

SSS Siedle

SSS Siedle BTSV 850-03 Manuel utilisateur

Dahua

Dahua VTO Series Manuel utilisateur

Elvox

Elvox 5651 Manuel utilisateur

Videx

Videx VIDEOKIT Series Manuel utilisateur

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuel utilisateur

Viking

Viking E-35-EWP Manuel utilisateur

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuel utilisateur

SSS Siedle

SSS Siedle BFCV 850 Series Manuel utilisateur

GRD

GRD MAX V2 Manuel utilisateur

Alecto

Alecto ADI-250 Manuel utilisateur

Perel

Perel EDB4 Manuel utilisateur

Bticino

Bticino Classe 300 Manuel utilisateur