Aiphone AX-DV-XP Manuel utilisateur

- INSTRUCTIONS -

The AX-DV-XP and AX-DVF-XP are color audio-video door stations for Aiphone’s AX-series, containing a standalone

proximity card reader with embedded host controller. Capable of storing up to 5,000 sets of credentials (cards) and

operating completely independent of an external host controller or PC, the AX-DV-XP and AX-DVF-XP are ideal for all

installations where reliable, inexpensive and easy-to-manage access control is desired.

Note: Programming of the AX-DV-XP and AX-DVF-XP requires Aiphone’s XP-KIT Programming Starter Kit for -XP

series standalone proximity card readers.

Door Station with Standalone Prox Reader

Pg. 1

NAMES & FEATURES

FEATURES:

Up to 5,000 credential storage (cards)

Standalone configuration without central ‘Host’

or personal computer

Night Lock function with contact output for

controlling after hours access and alarm

system mode

Forced Entry alarm output for triggering

external sounder or alarm system

Optional handheld Remote Programmer for

advanced functionality

NAMES & FUNCTIONS:

1. Camera 4. Speaker

2. Microphone 5. Call button

3. Name placard 6. Standalone Prox

Reader / Controller

AX-DVF-XP AX-DV-XP

PACKAGE CONTENTS:

OPTIONAL ACCESSORIES:

SBX-DVF-P – Surface-mount stainless steel

backbox (AX-DVF-XP only)

XC5T/9 – Blank User Card (Qty. 1)

XRP3 – Handheld Remote Programmer

XP-KIT – Programming Starter Kit,

contains:

XRP3 – Qty (1)

XC5T/9 – Qty (10)

XMMC3/9 – Qty (1)

(Note: XP-KIT is required for programming of

the AX-DV-XP / AX-DVF-XP!)

Mounting screw &

anchor bolt pack

(AX-DV-XP only)

AX-DV-XP or AX-DVF-XP

Vandal-resistant Door Station

Semi-flush backbox &

tamper-resistant bolts

(AX-DVF-XP only)

Blank name

placard

Security Driver

MOUNTING & INSTALLATION

Pg. 2

2'1"

20"

AX-DV-XP

AX-DVF-XP

3'1"

3'11"

AX-DV-XP

AX-DVF-XP

Installation Location:

Care should be taken when choosing the best

location for mounting the AX-DV-XP / AX-

DVF-XP. Do not install the video door station

in any areas subject to direct sunlight or other

strong direct lighting conditions; installation in

such locations may cause reduced visibility

and/or video quality while viewing from the

master station.

6'1" Mounting Height & Viewing Angle:

Because the AX-DV-XP and AX-DVF-XP

contain a fixed-angle camera element,

mounting height and placement relative to the

entry should be taken into consideration. The

recommended mounting height and

corresponding viewing angle are shown, at

left.

8-3/4"

1/4"1-3/8"

Figure 1

8-7/16"

1-25/32"

4-1/2"

Figure 3

Figure 2

-XP Series Prox

Reader Pigtail

Physical Mounting Instructions:

1. AX-DV-XP – provide mounting box or wall opening

sufficient for both the CAT-5e cable (from the AX CEU)

and the -XP series card reader wire pigtail (Fig. 1),

noting the offset location of the reader pigtail (Fig. 2).

AX-DVF-XP – provide wall surface opening for rough-in

backbox (supplied), using dimensions shown (Fig. 3).

Note: if surface mount is required, use the Aiphone

SBX-DVLF- (sold separately) .

2. Open the protective door and

connect the CAT-5e cable (RJ45)

from the AX CEU to the AX-DV-XP

or AX-DVF-XP station, carefully

routing the wire in one of the two

possible directions, as shown (Fig.

2). Be careful to avoid damaging the

wire jacket when securing the

protective door.

3. AX-DV-XP – Secure the door station to

the wall surface using the provided

mounting screws and/or anchors, as

shown (Fig. 1). Secure the vandal

resistant chassis using the security driver

(provided).

AX-DVF-XP – Secure the door station to

the backbox using the included security

screws / driver (Fig. 3).

(See Note 2)

(See Note 3)

(See Note 1)

WIRING

Pg. 3

12V DC

Power Supply

Red

Black

White: Not Used

Yellow: Not Used

Pink: Not Used

Blue: Not Used

Brown (Ground)

Strike DC Power

Violet (Lock)

Night Lock

Trigger Out

(See Note 4)

Forced Entry

Trigger Out

Red / Blue

Grey / Pink

Request-Exit

(Egress) Input

(See Note 4)

Forced Entry

Sensor Input

Green

Grey

NOTES:

1. The ‘Lock’ output (Violet wire) is a normally-open solid-state contact rated at 30VDC / 1A. Only DC-powered locks

can be connected directly to the reader. Locks requiring AC power, higher contact rating, or Normally-Closed

functionality should use an external 12VDC relay (Aiphone RY-18L or equivalent). Release duration is determined

by the reader’s programming configuration (see the -XP Series Programming & Operation Manual).

2. The ‘Request-Exit’ input is used when triggering the reader’s internal contact output from an external contact source

is desired (motion detector, egress button, intercom relay output, etc.). An input closure should be connected

across the Green wire and Ground (Brown wire). Unlock events triggered by this input are also subject to the

reader’s release duration (see the -XP Series Programming & Operation Manual).

3. When the Night Lock mode is active, a trigger will be provided across the ‘Night Lock Trigger Output’ (Red / Blue

wire) and Ground (Brown wire). This can be used to integrate with external alarm systems for improved

functionality.

4. The ‘Forced Entry Sensor Input’ (Grey wire) is designed to be connected to Ground (brown wire) in series with a

magnetic door sensor (or equivalent normally-closed device) to allow the system to determine when the door has

been either forced, or left open after an unlock event. When this sensor input active, an output trigger will be

provided across the ‘Forced Entry Trigger Out’ (Grey / Pink wire) and Ground (Brown wire), for connection to an

alarm system event input, sounder, or other desired device.

5. All device outputs (with the exception of the Violet ‘Lock’ output) provide a low current trigger output, and should not

be used to drive anything greater than another device’s trigger input without an appropriate relay. All device inputs

require only a contact closure across the respective wire and Ground (Brown wire).

6. The White, Yellow, Pink, and Blue wires are not used and should be trimmed to avoid possible shorting and system

malfunction.

Note: Only information pertaining to the wiring of the -XP series card reader is shown in this manual. For programming

information, consult the -XP Series Programming & Operation Manual (included in the XP-KIT Programming Starter

Kit). For AX series intercom configuration / connection information, consult the AX series Installation and

Operation Manual (included with the AX CEU).

PROGRAMMING:

See programming instructions included with the required XP-KIT Programming Starter Kit (sold separately).

Note: Do not attempt to program or use the AX-DV-XP / AX-DVF-XP door station without first reading

the initialization instructions included with the XP-KIT Programming Starter Kit!

CARD READER:

Power Source: 12V DC

Current Requirements: 40mA (Avg)

Terminations: Color-coded pre-wired pigtail

Operating Temperature: -10°~60°C / 14°~140°F

Operating Humidity: 0-95% relative humidity

non-condensing

SPECIFICATIONS:

DOOR STATION:

Power Source: AX-series CEU

Camera unit: CCD Camera

Scanning line: 525 lines

Min. illumination: 5 Lux at 1' or less

Terminations: RJ-45

Operating Temperature: -10°~60°C / 14°~140°F

Wiring Distance: 980ft w/ CAT-5e wire

Aiphone Communication Systems

1700 130th Ave. N.E.

Bellevue, WA 98005

(425) 455-0510

FAX (425) 455-0071

Pg. 4

AX-DV(F)-XP Instr.

0608TB

FCC WARNING:

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference that may cause undesired operation.

For proper regulatory compliance, the drain wire should be disconnected at the

power supply end of the cable.

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

The Reader is intended to be powered from a limited power source output of a

previously certified power supply.

TOLL FREE TECHNICAL SUPPORT:

(800) 692-0200

E-MAIL: [email protected]

SPECIFICATIONS

AX-DV-XP

DIMENSIONS:

AX-DVF-XP

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Aiphone Système d'interphone

Aiphone

Aiphone KAH-2 Manuel utilisateur

Aiphone

Aiphone MB-D Manuel utilisateur

Aiphone

Aiphone LDF-20C Manuel utilisateur

Aiphone

Aiphone AP-10AS/C Manuel utilisateur

Aiphone

Aiphone IE-1AD Manuel utilisateur

Aiphone

Aiphone MB-D Manuel utilisateur

Aiphone

Aiphone GH SERIES 410 Manuel utilisateur

Aiphone

Aiphone AP-1M Manuel utilisateur

Aiphone

Aiphone MY-2CD Manuel utilisateur

Aiphone

Aiphone JK-1HD Manuel utilisateur

Aiphone

Aiphone JSS-1A Manuel utilisateur

Aiphone

Aiphone IX-SS-2RA Manuel utilisateur

Aiphone

Aiphone IS-DVF-2RA-FR Manuel utilisateur

Aiphone

Aiphone MA-D Manuel utilisateur

Aiphone

Aiphone AN-8000EX Manuel utilisateur

Aiphone

Aiphone JK-1MD Manuel utilisateur

Aiphone

Aiphone LAF-3B Manuel utilisateur

Aiphone

Aiphone TA-1A Manuel utilisateur

Aiphone

Aiphone WP100A Manuel utilisateur

Aiphone

Aiphone AI-NVP-RA Manuel utilisateur

Aiphone

Aiphone LE-Bn Manuel utilisateur

Aiphone

Aiphone LEF-LD Manuel utilisateur

Aiphone

Aiphone LE-DL Manuel utilisateur

Aiphone

Aiphone GH-1AD Manuel utilisateur

Manuels Système d'interphone populaires d'autres marques

Bticino

Bticino LINEA 3000 Manuel utilisateur

MSI

MSI MSI-140 Manuel utilisateur

golmar

golmar Stadio Plus Manuel utilisateur

CyberData

CyberData 011211 series Manuel

Vidos

Vidos duo M1021 Manuel utilisateur

Vimar

Vimar ELVOX 7539/E Manuel utilisateur

SSS Siedle

SSS Siedle BTSV 850-03 Manuel utilisateur

Dahua

Dahua VTO Series Manuel utilisateur

Elvox

Elvox 5651 Manuel utilisateur

Videx

Videx VIDEOKIT Series Manuel utilisateur

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuel utilisateur

Viking

Viking E-35-EWP Manuel utilisateur

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuel utilisateur

SSS Siedle

SSS Siedle BFCV 850 Series Manuel utilisateur

GRD

GRD MAX V2 Manuel utilisateur

Alecto

Alecto ADI-250 Manuel utilisateur

Perel

Perel EDB4 Manuel utilisateur

Bticino

Bticino Classe 300 Manuel utilisateur