4
www.aim-sportline.com Release 1.00 –October 12th 2018
2
Configuration through Race Studio 3
Once the connection has been executed, it is necessary to configure the device, defining a specific event
that causes the camera image displaying. For example, if you wish to turn ON the camera when you
insert the Reverse Gear, these are the steps to follow:
•Open Race Studio 3, connect your system via Wi-Fi or USB and create a new configuration (or modify
an existing one).
•The Gear, of course, is supposed to be one of the available channels. It is possible to obtain it:
oThrough analog sensor, plugging it
into one of the device analog
channels, which must be configured
as expressed on the right (Channels
tab). The “Use reverse gear” box
must be ticked.
oThrough ECU, selecting the
compatible protocol with your
vehicle ECU from the ECU Stream
tab.
