aidios M1 Manuel utilisateur
User manual v1.0
1. Safety instructions and warnings ………….…………….1
2. Overview
2.1. Inside the box …………………………………………………2
2.2. Specification ………………………………………………2-3
2.3. Product overview ..……………………………………………….4
3. Getting started
3.1. Charging and powering monitor unit ……………………………5
3.2. Powering camera unit ……………………………………………6
4. Operation –General mode
4.1. OSD icons ……………………………………………………………7
4.2. Control keys …………….…………………….………………….8
5. Operation –Menu mode
5.1. Video category ……………………………………………….…..9
5.2. Audio category ……………………………………………….…10
5.2.1. Auto mute …………………………………………………...10
5.2.2. VOX …………………………………………………………...11
5.3. Camera category ……………………………………………….11
5.3.1. Add a camera unit ……………………………………………12
5.3.2. Auto scan ………………………………………………….…12
5.3.3. Picture in picture (PiP) ……………………………………….13
6. Troubleshooting and tips ………………………….….14-16
7. Warranty information …………………………………….17
8. FCC statement ……………………………………………18
9. Declaration of conformity / Others ……………………19
1
Please read and follow all instructions and warnings in this user manual
before using the product.
◼Strangulation Hazard - Keep the adapter cord out of the reach
of children. Never place the camera or cord within 3 feet of a crib
or playpen.
◼Choking Hazard - This product contains small parts which may
cause choking. Not for children under 3 years.
◼Risk of explosion if battery is replaced by an incorrect type.
Dispose of used battery according to the instructions.
◼Use ONLY the power adapters and battery supplied with this
product. Using other 3rd parties power adapter or battery may
cause fatal damage to the product.
◼Protect the adapter cord. Route cord so that they are not walked
on or pinched by items or against them.
◼Keep all components away from water or heat source such as a
sink, bath tub, laundry tub, fire place or stove.
◼Provide proper ventilation for both monitor and camera unit. Do
NOT cover them with any material, such as a blanket or cloth.
◼Disconnect all A/C adapters before cleaning. Do NOT immense in
water. Clean it only with a dry cloth.
◼Do NOT attempt to open the devices or accessories. No user
serviceable part inside. Risk of electrical shock, fire or death.
◼This product is NOT a substitute for direct supervision of your
baby. Check your baby's activities at regular intervals.
◼This product is not a toy. Do NOT allow children to play with it.
2
2.1. Inside the box
Thanks for purchasing aidios M1 wireless monitoring system. It
contains below components :
Monitor unit x 1
Camera unit with stand x 1
Rechargeable Lithium battery x 1
A/C adapters x 2
Mounting screw x 1
Adhesive rubber foot x 4
User manual x 1
2.2. Specification
RF frequency
2400 –2483.5 MHz
Type of modulation
GFSK
Type of spread spectrum
FHSS
Data rate
4 Mbps
Channel width
4 MHz
Transmission range
>1000 feet (LOS)
3
Monitor unit
Display
4.3” color LCD at 480x272
Audio
Built-in speaker and microphone
Battery
1800mAh Lithium rechargeable
Duration (screen on)
~10 hours
Duration (VOX on)
~18 hours
Operating voltage
5V
Camera unit
Picture sensor
1/5” Color CMOS, 640x480
Optical lens
F2.4, EFL 2.5mm, FOV 70∘
Night vision
8 x 940nm IR LEDs
Light sensor
Built-in
Audio
Built-in speaker and microphone
Operating voltage
5V
A/C adapter
Battery
Mfg.
Dongguan Guanjin
Electronics Technology
Co., Ltd.
Shenzhen Blue Sea Excellent
New Energy Co., Ltd.
Model #
K05B050100 series
FT525068P-1800mAh
Spec.
Input 100-240V AC
50/60 Hz
Output 5.0V DC 1.0A
3.7V 1800mAh 6.66Wh
4
2.3. Product Overview
5
3.1. Charging and powering monitor unit
Loosen the screw and open battery door. Plug in the battery to
the battery socket as shown in
pic. 1.
Close the battery door
and tighten the screw.
Plug the power adapter into an electrical outlet. Insert the
3.5mm plug to the power jack as shown in
pic. 2
. The charging
process starts and charge LED indicator emits red light.
Press and hold the power button for 1 second to turn on the
monitor unit. Power LED indicator emits blue light when monitor
unit is turned on.
6
3.2. Powering camera unit
Plug the power adapter into an electrical outlet. Insert the
3.5mm plug to the power jack as shown in
pic. 3
. Slide the
power switch to 'ON' position to turn on the camera unit. Power
LED indicator emits blue light when camera unit is turned on.
NOTE :
-Do not injest battery, Chemical Burn Hazard.
-This product contains a Lithium cell battery. If the battery is
swallowed, it can cause severe internal burns in short period and
can lead to death.
-Keep new and used batteries away from children.
-If the battery compartment does not close securely, stop using the
product and keep away from children.
-If you think battery might have been swallowed and placed inside
any part of body, seek immediate medical attention.
7
4.1. OSD icons
Camera icons :
Standard camera unit
Camera unit at zoom mode
Camera unit with pan tilt docking
(*) Temperature reading icon will be displayed only when pan tilt docking
is installed.
8
4.2. Control keys
Power button
Press and hold : Power on/off
Short press : video off mode (audio only)
(*) Pan tilt mode only available when pan tilt docking is installed.
Table des matières
