aidapt VM800 Manuel de programmation
VM800
Hands Free Hair Dryer Stand
Usage and Maintenance Instructions
EN
INTRODUCTION
INTENDED USE
ASSEMBLY INSTRUCTIONS
Thank you for purchasing the Hair Dryer Stand from Aidapt.
Please examine your product for any visible damage before using/installing. If you
see any damage or suspect a fault, please do not use, but contact your supplier.
The Hair Dryer Stand is designed for users who have limited mobility.
1. Place stem into base. Ensure black collar is facing up. (g. 1)
2. Align screw hole in the base collar. Secure using screw provided. Ensure
this is tightened before use. (g. 1)
3. To adjust height, turn inner tube clockwise and set to desired height. Turn
inner tube anti-clockwise to lock height in place. (gs. 2 & 3)
1
Usage and Maintenance Instructions
(g. 1)
(a)
(c-2) (c-1)
(b)
(g. 2) (g. 3)
PARTS
1x Base (a)
1x Flexible Goose Neck Arm with
Hook and Loop Fastener Strap (b)
1x Wide Pole (c-1) -Narrow Pole (c-2)
4x Screws
2
Usage and Maintenance Instructions
4. Place gooseneck over inner tube. Align screw holes and use screw
provided to secure. Ensure this is tightened before use. (g. 4)
5. Use clamp to hold hair dryer in place. (g. 5)
6. Wrap the hook and loop fastener strap around the hair dryer handle to
secure hair dryer in place. (g. 5)
7. Bend the gooseneck arm to adjust to desired angle. DO NOT bend goose
neck over 90 degrees.
(g. 4) (g. 5)
CLEANING
The Hair Dryer Stand should be cleaned using a non-abrasive cleaner or mild
detergent with a soft cloth only: these cleaning instructions do not apply to the hair
dryer itself. Abrasive cleaners or abrasive cleaning pads may seriously damage the
product beyond repair and should not be used.
MAINTENANCE
Please check the hair dryer
stand periodically for any signs
of damage and if in doubt
contact your supplier.
TECHNICAL INFORMATION
Width 190 mm
Depth 190 mm
Height 660 mm
Net Weight 0.96 kgs
IMPORTANT INFORMATION
Please exercise common sense and do not take any unnecessary risks when using
this product; as the user you must accept liability for safety when using the product.
A copy of the instructions leaet can be downloaded from our website.
Always turn electrical items o at the socket when not in use.
Aidapt Bathrooms Ltd, Lancots Lane, Sutton Oak, St Helens, WA9 3EX
Telephone: +44 (0) 1744 745 020 Fax: +44 (0) 1744 745 001
Web: www.aidapt.com
Email: [email protected]
Table des matières
Autres manuels aidapt Support et étagère
Manuels Support et étagère populaires d'autres marques
Salamander
Salamander Acadia AC/W/L400/WH Manuel utilisateur
Fohhn
Fohhn VAT-09 Guide de l'utilisateur
ricoo
ricoo FS0522 Manuel utilisateur
AMSOIL
AMSOIL BMK-22 Guide rapide
Kargo Master
Kargo Master 48220 Manuel utilisateur
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur
