Agilent Technologies U7242A Manuel utilisateur

Agilent Technologies

U7242A USB3.0 Test

Fixture

User’s Guide

2 Agilent U7242A USB 3.0 Test Fixture User’s Guide

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Agilent

Technologies, Inc. as governed by United

States and international copyright laws.

Manual Part Number

U7242-97000

Edition

First edition, May 2009

Agilent Technologies, Inc.

1900 Garden of the Gods Road

Colorado Springs, CO 80907 USA

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connec-

tion with the furnishing, use, or per-

formance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

Restricted Rights Legend

If software is for use in the performance of a

U.S. Government prime contract or subcon-

tract, Software is delivered and licensed as

“Commercial computer software” as

defined in DFAR 252.227-7014 (June 1995),

or as a “commercial item” as defined in FAR

2.101(a) or as “Restricted computer soft-

ware” as defined in FAR 52.227-19 (June

1987) or any equivalent agency regulation or

contract clause. Use, duplication or disclo-

sure of Software is subject to Agilent Tech-

nologies’ standard commercial license

terms, and non-DOD Departments and

Agencies of the U.S. Government will

receive no greater than Restricted Rights as

defined in FAR 52.227-19(c)(1-2) (June

1987). U.S. Government users will receive

no greater than Limited Rights as defined in

FAR 52.227-14 (June 1987) or DFAR

252.227-7015 (b)(2) (November 1995), as

applicable in any technical data.

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated condi-

tions are fully understood and

met.

Contents

U7242A USB 3.0 Test Fixture Description 5

Fixture and Accessories 6

Dimension 6

Characteristics, Regulatory, and Safety Information 7

Electrical Characteristics 7

Operating and Non-operating Environmental Characteristics 7

Safety Information 7

4 Agilent U7242AUSB 3.0 Test Fixture User’s Guide

Agilent Technologies

U7242A USB 3.0 Test Fixture Description

The U7242A USB3.0 test fixture is required to perform the measurement

with the Agilent U7243A USB3.0 Electrical Compliance Test Application.

The fixture helps you to easily access the USB3.0 test signals.

The U7242A USB3.0 test fixture is required for the all the Far End (TP1)

tests including:

•Far End Unit Internal test

•Far End SSC Slew Rate test

•Far End Template test

•Far End Peak- to- Peak Differential Output Voltage test

•Far End RMS Random Jitter test

•Far End Maximum Deterministic Jitter test

•Far End Total Jitter at BER- 12 test

Figure 1 U7242A USB3.0 Test Fixture Board

Fixture and Accessories

The complete set of USB3.0 test fixture contains the following items:

Dimension

The dimension of the U7242A test fixture board is as follows:

PCB board height = 2.00 inches

PCB board width = 7.75 inches

PCB board thickness = 0.063 inches

Part Number Description Quantity

U7242-66501 USB 3.0 test fixture 1 unit

8121-1880 USB 3.0 Std-A to Std-B cable (4 inches) 1 unit

8121-1924 USB 3.0 Std-A to Std-B cable (3.1 inches) 1 unit

1253-8358 Double Banana Plug With Shorting Bar 1 unit

Characteristics, Regulatory, and Safety Information

Electrical Characteristics

The following electrical characteristics are the specification of the U7242A

USB3.0 test fixture:

Operating and Non-operating Environmental Characteristics

The following are the environmental characteristics of the U7242A USB3.0

test fixture:

Safety Information

The U7237A 10GBASE- T transmitter test fixture herewith complies with

the essential requirements of the Low Voltage Directive 73/23/EEC and the

EMC Directive 89/336/EEC, and carries the CE- marking accordingly. The

product was tested in a typical configuration with HP/Agilent test systems.

The following are the safety regulatory information of the U7237A

10GBASE- T transmitter test fixture:

Description Specification

Trace Impedance 100 ohm + 10%

Mated Connector 90 ohm + 10%

Cable 90 ohm + 10%

Description Minimum Requirement

Ambient temperature Operating = 0°C to 40°C

Non-operating = - 51°C to 71°C

Humidity Operating = 95% RH at 40°C for 24 hours

Altitude Operating = 4,570m (15,000 ft)

Non-operating = 15,244m (50,000 ft)

Indoor use This fixture is rated for indoor use only

Random vibration HP/Agilent class B1 and MIL-PRF-2880 OF Class 3 random

Mechanical shock HP/Agilent class B1 and MIL-PRF-2880 OF (operating 30g,

1/2 sine, 11-ms duration, 3 shocks/axis along major axis.

Total of 18 shocks)

Minimum Requirement:

IEC 61010- 1: Second edition 2001- 2

EN 61010- 1:2001

UL3111- 1 or UL 6101B- 1:2003 (must be an Agilent ID)

Canada: CSA- C22.2 No. 1010.1:1992

First edition, May 2009

*U7242-97000*

U7242-97000

www.agilent.com

Agilent Technologies

Table des matières

Autres manuels Agilent Technologies Équipement de test

Agilent Technologies

Agilent Technologies U1602A Manuel

Agilent Technologies

Agilent Technologies E5022A Manuel utilisateur

Agilent Technologies

Agilent Technologies J-BERT N4903 Manuel utilisateur

Agilent Technologies

Agilent Technologies 54620 Series Instructions d'utilisation et de sécurité

Agilent Technologies

Agilent Technologies E840 A Series Manuel d'installation et d'exploitation

Agilent Technologies

Agilent Technologies 5530 Manuel utilisateur

Agilent Technologies

Agilent Technologies Infiniium 80000 Series Manuel utilisateur

Agilent Technologies

Agilent Technologies Infiniium 90000 Q-Series Manuel

Agilent Technologies

Agilent Technologies InfiniiVision 3000 X-Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 85050B Manuel

Agilent Technologies

Agilent Technologies 81250 Mode d'emploi

Agilent Technologies

Agilent Technologies 85105A Option 50 Manuel d'installation et d'exploitation

Agilent Technologies

Agilent Technologies E4406A VSA Series Manuel d'installation et d'exploitation

Agilent Technologies

Agilent Technologies BERT N4901A Manuel utilisateur

Agilent Technologies

Agilent Technologies 8960 Manuel utilisateur

Agilent Technologies

Agilent Technologies InfiniiVision 3000 X- Series Manuel de l'opérateur

Agilent Technologies

Agilent Technologies 8922M Manuel utilisateur

Agilent Technologies

Agilent Technologies 280-DS Manuel utilisateur

Agilent Technologies

Agilent Technologies PHD-4 Manuel utilisateur

Agilent Technologies

Agilent Technologies 8960 Manuel d'installation et d'exploitation

Agilent Technologies

Agilent Technologies Infiniium 90000 A Manuel utilisateur

Agilent Technologies

Agilent Technologies InfiniiVision 7000A Series Manuel

Agilent Technologies

Agilent Technologies MSO8104A Guide de démarrage rapide

Agilent Technologies

Agilent Technologies 90000 X Series Manuel utilisateur

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur

Rohde & Schwarz

Rohde & Schwarz RTA4000 Manuel utilisateur

Ritmix

Ritmix RAT-701 Manuel utilisateur