Agilent Technologies E1852A Manuel utilisateur

,QVWDOODWLRQ*XLGH

($

%OXHWRRWK 7HVW6HW

E1852A-90001.book Page 1 Tuesday, April 24, 2001 2:22 PM

 '#+PUVCNNCVKQP)WKFG

)GPGTCN

Information contained in this document is

subject to change without notice. Agilent

Technologies makes no warranty of any kind

with regard to this material, including, but not

limited to, the implied warranties of

merchantability and fitness for a particular

purpose. Agilent Technologies shall not be liable

for errors contained herein or for incidental or

consequential damages in connection with the

furnishings, performance, or use of this material.

No part of this document may be photocopied,

reproduced, or translated to another language

without the prior written consent of Agilent

Technologies.

The E 852A is listed as a Development Tool for

Bluetooth SIG purposes.

Station Road, South Queensferry, Scotland,

EH30 9TG, UK.

Bluetooth is a trademark owned by the Bluetooth

SIG, Inc.

Microsoft Windows, 95, 98, NT are U.S. registered

trademarks of Microsoft Corporation

Pentium is a U.S. registered trademark of Intel

Corporation.

Agilent Part No. E1852-90001

Printed in UK

May 200

.GICN+PHQTOCVKQP

Certification

Agilent Technologies certifies that this product

met its published specifications at the time of

shipment from the factory. Agilent Technologies

further certifies that its calibration

measurements are traceable to the United States

National Institute of Standards and Technology,

to the extent allowed by the Institute’s

calibration facility, and to the calibration

facilities of other International Standards

Organization members.

Warranty

This Agilent Technologies instrument product is

warranted against defects in material and

workmanship for a period of three years from

date of shipment. During the warranty period,

Agilent Technologies will at its option, either

repair or replace products which prove to be

defective. For warranty service or repair, this

product must be returned to a service facility

designated by Agilent Technologies. Buyer shall

prepay shipping charges to Agilent Technologies

and Agilent Technologies shall pay shipping

charges, duties, and taxes for products returned

to Agilent Technologies from another country.

Agilent Technologies warrants that its software

and firmware designated by Agilent Technologies

for use with an instrument will execute its

programming instructions when properly

installed on that instrument. Agilent

Technologies does not warrant that the operation

of the instrument, or firmware will be

uninterrupted or error free.

Limitation of Warranty

The foregoing warranty shall not apply to defects

resulting from improper or inadequate

maintenance by Buyer, Buyer-supplied software

or interfacing, unauthorized modification or

misuse, operation outside of the environmental

specifications for the product, or improper site

preparation or maintenance. NO OTHER

WARRANTY IS EXPRESSED OR IMPLIED.

AGILENT TECHNOLOGIES SPECIFICALLY

DISCLAIMS THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE.

Exclusive Remedies

THE REMEDIES PROVIDED HEREIN ARE

BUYER’S SOLE AND EXCLUSIVE REMEDIES.

AGILENT TECHNOLOGIES SHALL NOT BE

LIABLE FOR ANY DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES, WHETHER BASED ON CONTRACT,

TORT, OR ANY OTHER LEGAL THEORY.

E1852A-90001.book Page 2 Tuesday, April 24, 2001 2:22 PM

5CHGV[5[ODQNU

'#+PUVCNNCVKQP)WKFG 

5CHGV[5[ODQNU

The following symbols on the instrument and in the documentation

indicate precautions which must be taken to maintain safe operation of

the instrument.

5CHGV[0QVKEGU This guide uses warnings and cautions to denote hazards

WARNING A warning calls attention to a procedure, practice or the like, which, if

not correctly performed or adhered to, could result in injury or loss of

life. Do not proceed beyond a warning until the indicated conditions are

fully understood and met.

CAUTI N A caution calls attention to a procedure, practice or the like which, if not

correctly performed or adhered to, could result in damage to or the

destruction of part or all of the equipment. Do not proceed beyond a

caution until the indicated conditions are fully understood and met.

6JG+PUVTWEVKQP&QEWOGPVCVKQP5[ODQN6JG TQFWEV

KUOCTMGFYKVJVJKUU[ODQNYJGPKVKUPGEGUUCT[HQT

VJGWUGTVQTGHGTVQVJGKPUVTWEVKQPUKPVJGUW NKGF

FQEWOGPVCVKQP

#NVGTPCVKPIEWTTGPV#%

6JKUU[ODQNKPFKECVGUVJGQ GTCVKPIUYKVEJHQT 1P 

OQFG

6JKUU[ODQNKPFKECVGUVJG QUKVKQPQHVJGQ GTCVKPI

UYKVEJHQT 1HH OQFG

6JKUU[ODQNKPFKECVGUVJCVCFGXKEGQT CTVQHC

FGXKEGOC[DGUWUEG VKDNGVQGNGEVTQUVCVKE

FKUEJCTIGU'5&YJKEJECPTGUWNVKPFCOCIGVQVJG

TQFWEV1DUGTXG'5& TGECWVKQPUIKXGPQPVJG

TQFWEVQTKVUWUGTFQEWOGPVCVKQPYJGPJCPFNKPI

GSWK OGPVDGCTKPIVJKUOCTM

E1852A-90001.book Page 3 Tuesday, April 24, 2001 2:22 PM

5CHGV[5[ODQNU

 '#+PUVCNNCVKQP)WKFG

)GPGTCN5CHGV[+PHQTOCVKQP

The following general safety precautions must be observed during all

phases of operation, service, and repair of this instrument. Failure to

comply with these precautions or with specific warnings elsewhere in

this manual violates safety standards of design, manufacture, and

intended use of the instrument. Agilent Technologies assumes no liability

for the customer’s failure to comply with these requirements.

WARNING This is a Safety Class I instrument (provided with a protective

earthing ground, incorporated in the power cord). The mains plug

shall only be inserted in a socket outlet provided with a protective

earth contact. Any interruption of the protective conductor inside

or outside of the instrument is likely to make the instrument

dangerous. Intentional interruption is prohibited.

DO NOT defeat the earth-grounding protection by using an extension

cable, power cable, or auto transformer without a protective ground

connector. If you are using an auto transformer, make sure its common

terminal is connected to the protective earth contact of the power source

outlet socket.

DO NOT operate the product in an explosive atmosphere or in the

presence of flammable gasses or fumes.

DO NOT use repaired fuses or short-circuited fuseholders: For continued

protection against fire, replace the line fuse(s) only with fuse(s) of the

same voltage and current rating and type.

DO NOT perform procedures involving cover or shield removal unless

you are qualified to do so. Operating personnel must not remove

equipment covers or shields. Procedures involving the removal of covers

and shields are for use by service-trained personnel only.

DO NOT service or adjust alone: Under certain conditions, dangerous

voltages may exist even with the equipment switched off. To avoid

dangerous electrical shock, service personnel must not attempt internal

service or adjustment unless another person, capable of rendering first

aid and resuscitation, is present.

E1852A-90001.book Page 4 Tuesday, April 24, 2001 2:22 PM

5CHGV[5[ODQNU

'#+PUVCNNCVKQP)WKFG 

DO NOT operate damaged equipment: Whenever it is possible that the

safety protection features built into this product have been impaired,

either through physical damage, excessive moisture, or any other reason,

REMOVE POWER and do not use the product until safe operation can be

verified by service-trained personnel. If necessary, return the product to a

Agilent Sales and Service Office for service and repair to ensure the

safety features are maintained.

DO NOT substitute parts or modify equipment: Because of the danger of

introducing additional hazards, do not install substitute parts or perform

any unauthorized modification to the product. Return the product to an

Agilent Sales and Service Office for service and repair to ensure the

safety features are maintained.

E1852A-90001.book Page 5 Tuesday, April 24, 2001 2:22 PM

5CHGV[5[ODQNU

 '#+PUVCNNCVKQP)WKFG

E1852A-90001.book Page 6 Tuesday, April 24, 2001 2:22 PM

'#+PUVCNNCVKQP)WKFG 

Safety Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Getting Started

Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Unpacking the E 852A Bluetooth Test Set. . . . . . . . . . . . . . . . . . . . . . 11

Initial Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Documentation Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Conventions Used in this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Abbreviations Used in this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

E 852A Bluetooth Test Set Installation. . . . . . . . . . . . . . . . . . . . . . . . . 13

Powering On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Rack Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Rear Panel Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Front Panel Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Installing the PC Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Minimum System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Install the User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Confidence Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Regulatory Information

General Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Compliance and Markings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Electromagnetic Compatibility (EMC) . . . . . . . . . . . . . . . . . . . . . 38

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Markings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Sound Emission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Responsibilities of the Customer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Agilent Sales and Service Offices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

E1852A-90001.book Page 7 Tuesday, April 24, 2001 2:22 PM

 '#+PUVCNNCVKQP)WKFG

E1852A-90001.book Page 8 Tuesday, April 24, 2001 2:22 PM



)GVVKPI5VCTVGF

E1852A-90001.book Page 9 Tuesday, April 24, 2001 2:22 PM

)GVVKPI5VCTVGF 9GNEQOG

 '#+PUVCNNCVKQP)WKFG

9GNEQOG

Welcome to the Agilent Technologies E 852A Bluetooth Test Set

Installation Guide.

The E 852A Bluetooth Test Set only has status indicators on its front

panel. You cannot control it from the front panel. Instead, the test set is

controlled entirely by the remote commands applied to the parallel

interface port. You can use the Windows based User Interface supplied

on the CD-ROM for stand alone applications. Or, you can create your own

software to control the test set if you want to include it as part of a more

complex test system. The Windows based User Interface and remote

commands are fully described in the E 852A Bluetooth Test Set

Operating Guide.

The Installation Guide is divided into the following sections:

• Unpacking the E 852A Bluetooth Test Set

• Documentation Information

• E 852A Bluetooth Test Set Installation

• Installing the PC Software

• General Specifications

• Compliance and Markings

• Regulatory Information

• Responsibilities of the Customer

• Agilent Sales and Service Offices

E1852A-90001.book Page 10 Tuesday, April 24, 2001 2:22 PM

Autres manuels Agilent Technologies Équipement de test

Agilent Technologies

Agilent Technologies 93000 SOC Series Guide d'installation

Agilent Technologies

Agilent Technologies MSO8104A Guide de démarrage rapide

Agilent Technologies

Agilent Technologies e6601a Instructions d'installation et d'utilisation

Agilent Technologies

Agilent Technologies HP 10070A Manuel utilisateur

Agilent Technologies

Agilent Technologies U1610/20A Manuel utilisateur

Agilent Technologies

Agilent Technologies E6630A Manuel utilisateur

Agilent Technologies

Agilent Technologies InfiniiVision 5000 Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 2000 X Manuel utilisateur

Agilent Technologies

Agilent Technologies U1583A Manuel utilisateur

Agilent Technologies

Agilent Technologies E4406A VSA Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 8960 Series 10 Manuel utilisateur

Agilent Technologies

Agilent Technologies E5023U Guide de démarrage rapide

Agilent Technologies

Agilent Technologies 1100 Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 85052D Manuel

Agilent Technologies

Agilent Technologies 3070 Series Mode d'emploi

Agilent Technologies

Agilent Technologies InfiniiVision 3000 X- Series Guide de configuration

Agilent Technologies

Agilent Technologies 16533A 1-GSa/s Manuel

Agilent Technologies

Agilent Technologies 54610B Manuel

Agilent Technologies

Agilent Technologies 16048A Manuel d'utilisation

Agilent Technologies

Agilent Technologies E8285A Manuel utilisateur

Agilent Technologies

Agilent Technologies Infiniium 9000 Series Manuel utilisateur

Agilent Technologies

Agilent Technologies InfiniiVision MSO6104A Guide de démarrage rapide

Agilent Technologies

Agilent Technologies 85050B Manuel

Agilent Technologies

Agilent Technologies InfiniiVision 2000 X-Series Manuel utilisateur

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur

Rohde & Schwarz

Rohde & Schwarz RTA4000 Manuel utilisateur

Ritmix

Ritmix RAT-701 Manuel utilisateur