Agilent Technologies 85110L Manuel

The test & measurement

equipment you need at

the price you want.

Alltest carries the world’s largest selection of

used/refurbished benchtop test & measurement

equipment at 50% the price of new.

Our equipment is guaranteed working, warrantied, and

available with certified calibration from our in-house staff

of technicians and engineers.

• 10+ full time technicians with over 150 years of

specialization

• 90 day warranty & 5 day right of return on all

equipment

•

• 1-3 year warranties for new and

premium-refurbished equipment

• Every unit tested to OEM specifications

• Satisfaction guaranteed

You have plans, we will help you achieve them.

Any project. Any budget.

Get a quote today!

CCall (732) 919-3339 or email sales@alltest.net.

Alltest Instruments, Inc.

500 Central Ave.

Farmingdale, NJ 07727

P: (732) 919-3339

F: (732) 919-3332

alltest.net

sales@alltest.net

User’s and Service Guide

Agilent Technologies 85110L

S-Parameter Test Set

This manual applies directly to instruments with the following

serial number prefixes 3235A.

Agilent Part Number: 85110-90048

Printed in USA

Print Date: November 2002

Supersedes: March 1993

Notice

The information contained in this document is subject to change without notice.

Agilent Technologies makes no warranty of any kind with regard to this material, including, but not

limited to, the implied warranties of merchantability and fitness for a particular purpose. Agilent

Technologies shall not be liable for errors contained herein or for incidental or consequential

damages in connection with the furnishing, performance, or use of this material.

Agilent Technologies assumes no responsibility for the use or reliability of its software on

equipment that is not furnished by Agilent Technologies.

This document contains proprietary information which is protected by copyright. All rights are

reserved. No part of this document may be photocopied, reproduced, or translated to another

language without prior written consent of Agilent Technologies.

Restricted Rights Legend

Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in

subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS

252.227-7013 for DOD agencies, and subparagraphs (c)(1) and (c)(2) of the Commercial Computer

Software Restricted Rights clause at FAR 52.227-19 for other agencies.

Assistance

Product maintenance agreements and other customer assistance agreements are available

for Agilent products. For any assistance, contact the nearest Agilent Technologies sales or

service office. Refer to “Contacting Agilent,” on page iv for a list of Agilent offices.

iii

Service and General Maintenance

For any assistance with—or servicing of—your test set, contact Agilent Technologies. Refer

to “Contacting Agilent,” on page iv for contact information.

If your test set needs servicing or repair, ship it to Agilent Technologies. Be sure to include

a description of any failed test and any error message. Ship the instrument using the

original packaging materials. Shipping the instrument in anything other than the original

packaging may result in non-warranted damage.

General Maintenance and Care

Use connector savers to protect front-panel connectors:

The use of connector savers (adapters attached to the front-panel connectors) will save

wear and tear on the test set’s connectors. Adapters are generally easier and less expensive

to replace should they be damaged.

Maintenance:

There is no specific maintenance required. If you wish to clean the housing of the test set,

do so using only a dry or slightly damp cloth.

WARNING To prevent electrical shock, disconnect the test set from the mains source

before cleaning. Use a dry cloth or one slightly dampened with water to

clean the external case parts. Do not attempt to clean internally.

Documentation Warranty

THE MATERIAL CONTAINED IN THIS DOCUMENT IS PROVIDED "AS IS," AND IS

SUBJECT TO BEING CHANGED, WITHOUT NOTICE, IN FUTURE EDITIONS. FUR-

THER, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, AGILENT

DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED WITH REGARD

TO THIS MANUAL AND ANY INFORMATION CONTAINED HEREIN, INCLUDING

BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE. AGILENT SHALL NOT BE LIABLE

FOR ERRORS OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CON-

NECTION WITH THE FURNISHING, USE, OR PERFORMANCE OF THIS DOCU-

MENT OR ANY INFORMATION CONTAINED HEREIN. SHOULD AGILENT AND

THE USER HAVE A SEPARATE WRITTEN AGREEMENT WITH WARRANTY

TERMS COVERING THE MATERIAL IN THIS DOCUMENT THAT CONFLICT WITH

THESE TERMS, THE WARRANTY TERMS IN THE SEPARATE AGREEMENT WILL

CONTROL.

Contacting Agilent

Safety Symbols

The following safety symbols are used throughout this manual. Familiarize yourself with

each of the symbols and its meaning before operating this instrument.

CAUTION Caution denotes a hazard. It calls attention to a procedure that, if not

correctly performed or adhered to, could result in damage to or destruction of

the instrument. Do not proceed beyond a caution note until the indicated

conditions are fully understood and met.

WARNING Warning denotes a hazard. It calls attention to a procedure that, if

not correctly performed or adhered to, could result in injury or loss

of life. Do not proceed beyond a warning note until the indicated

conditions are fully understood and met.

Online assistance: www.agilent.com/find/assist

United States

(tel) 1 800 452 4844, or

1 800 593 6635 for on-site

service of systems

Latin America

(tel) (305) 269 7500

(fax) (305) 269 7599

Canada

(tel) 1 877 894 4414

(fax) (905) 282-6495

Europe

(tel) (+31) 20 547 2323

(fax) (+31) 20 547 2390

New Zealand

(tel) 0 800 738 378

(fax) (+64) 4 495 8950

Japan

(tel) (+81) 426 56 7832

(fax) (+81) 426 56 7840

Australia

(tel) 1 800 629 485

(fax) (+61) 3 9210 5947

Singapore

(tel) 1 800 375 8100

(fax) (65) 836 0252

Malaysia

(tel) 1 800 828 848

(fax) 1 800 801 664

Philippines

(tel) (632) 8426802

(tel) (PLDT subscriber only):

1 800 16510170

(fax) (632) 8426809

(fax) (PLDT subscriber only):

1 800 16510288

Thailand

(tel) outside Bangkok:

(088) 226 008

(tel) within Bangkok:

(662) 661 3999

(fax) (66) 1 661 3714

Hong Kong

(tel) 800 930 871

(fax) (852) 2506 9233

Taiwan

(tel) 0800-047-866

(fax) (886) 2 25456723

People’s Republic of

China

(tel) (preferred):

800-810-0189

(tel) (alternate):

10800-650-0021

(fax) 10800-650-0121

India

(tel) 1-600-11-2929

(fax) 000-800-650-1101

General Safety Considerations

WARNING This is a Safety Class I product (provided with a protective earthing

ground incorporated in the power cord). The mains plug shall only

be inserted in a socket outlet provided with a protective earth

contact. Any interruption of the protective conductor, inside or

outside of the instrument, will make the instrument dangerous.

Intentional interruption is prohibited.

WARNING If this product is not used as specified, the protection provided by

the equipment could be impaired. This product must be used in a

normal condition (in which all means for protection are intact) only.

WARNING No operator serviceable parts inside. Refer servicing to qualified

personnel. To prevent electrical shock, do not remove covers.

CAUTION VENTILATION REQUIREMENTS: When installing the product in a cabinet,

the convection into and out of the product must not be restricted. The ambient

temperature (outside the cabinet) must be less than the maximum operating

temperature of the product by 4°C for every 100 watts dissipated in the

cabinet. If the total power dissipated in the cabinet is greater than 800 watts,

then forced convection must be used.

CAUTION The front panel LINE switch disconnects the mains circuits from the mains

supply after the EMC filters and before other parts of the instrument.

CAUTION This product is designed for use in Installation Category II and Pollution

Degree 2 per IEC 1010 and 664 respectively.

Regulatory Information

This section contains information that is required by various government regulatory

agencies.

Instrument Markings

The instruction documentation symbol. The product is marked with this symbol

when it is necessary for the user to refer to the instructions in the documentation.

The CE mark is a registered trademark of the European Community. (If

accompanied by a year, it is when the design was proven.)

The CSA mark is a registered trademark of the Canadian Standards Association.

This is a symbol of an Industrial Scientific and Medical Group 1 Class A product.

ICES/NMB-

001 This ISM device complies with Canadian ICES-001.

Cet appareil ISM est conforme a la norme NMB-001 du Canada.

The C-Tick mark is a registered trademark of the Australian Spectrum

Management Agency.

This symbol is used to designate the “on” position of the power line switch.

This symbol is used to designate the “off” position of the power line switch.

154268

vii

Compliance with German Noise Requirements

This is to declare that this instrument is in conformance with the German Regulation on

Noise Declaration for Machines (Laermangabe nach der Maschinenlaermrerordung −3.

GSGV Deutschland).

Statement of Compliance

This product has been designed and tested in accordance with the standards listed on the

Manufacturer’s Declaration of Conformity, and has been supplied in a safe condition. The

documentation contains information and warnings that must be followed by the user to

ensure safe operation and to maintain the product in a safe condition.

Acoustic Noise Emission/Geraeuschemission

LpA<70 dB Lpa<70 dB

Operator Position am Arbeitsplatz

Normal Operation normaler Betrieb

per ISO 7779 nach DIN 45635 t. 19

viii

Table des matières

Autres manuels Agilent Technologies Équipement de test

Agilent Technologies

Agilent Technologies XX3625 Manuel utilisateur

Agilent Technologies

Agilent Technologies 81250 Manuel utilisateur

Agilent Technologies

Agilent Technologies 54622A Manuel utilisateur

Agilent Technologies

Agilent Technologies DisplayPort Manuel d'installation et d'exploitation

Agilent Technologies

Agilent Technologies 11644A Series Manuel

Agilent Technologies

Agilent Technologies TS-5400 Manuel de la liste des pièces

Agilent Technologies

Agilent Technologies N9360A Manuel du propriétaire

Agilent Technologies

Agilent Technologies InfiniiVision 3000 X-Series Manuel utilisateur

Agilent Technologies

Agilent Technologies ProBER 2 Manuel utilisateur

Agilent Technologies

Agilent Technologies 16034G Manuel utilisateur

Agilent Technologies

Agilent Technologies PHD-4 Manuel utilisateur

Agilent Technologies

Agilent Technologies E5035A Manuel utilisateur

Agilent Technologies

Agilent Technologies Infiniium 90000 X Manuel utilisateur

Agilent Technologies

Agilent Technologies E6651A Manuel utilisateur

Agilent Technologies

Agilent Technologies 85052D Manuel

Agilent Technologies

Agilent Technologies N4010A Manuel utilisateur

Agilent Technologies

Agilent Technologies InfiniiVision 5000 Series Manuel

Agilent Technologies

Agilent Technologies 93000 SOC Series Guide d'installation

Agilent Technologies

Agilent Technologies Infi niium 9000 Series Manuel de l'opérateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies InfiniiVision 5000 Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 85052B Manuel

Agilent Technologies

Agilent Technologies 16452A Manuel d'utilisation

Agilent Technologies

Agilent Technologies 85105A Option 50 Manuel d'installation et d'exploitation

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur

Rohde & Schwarz

Rohde & Schwarz RTA4000 Manuel utilisateur

Ritmix

Ritmix RAT-701 Manuel utilisateur