Agilent Technologies G8610 Series Guide de référence

Agilent Technologies Helium Leak Detector

G8610, G8611, and G8612 Series Quick Reference Card

Manual Number G8610-90000, Rev. C

November 2017

Start Up (Manual Section 1.3.4)

Installation: Do not install or use the pump in an environment exposed

to atmospheric agents (rain, snow, ice), dust, aggressive gases, or in

explosive environments or those with a high fire risk. During operation,

the following environmental conditions must be respected:

•Temperature: from +12 °C to + 45 °C

•Relative humidity: up to 90% (non-condensing)

Plug in power cord, flip switch ON behind unit.

Wait about 7 minutes for "SYSTEM READY."

First time startup will

prompt a wizard to help

select language, units,

date, time, and options.

These may be changed

any time through the

menu screens.

Calibration Set Up (Manual Section 4.1)

•Read Internal Leak -Quick check to see if instrument reads

calibrated leak correctly

•To Calibrate:

1. Select Internal Leak and Full.

2. Tap Calibrate.

3. Tap OK when calibration is complete.

Menu Navigation (Manual Section 1.5)

Calibration

Calibrate with

Internal/External

Leak

External leak to be placed on Test Port or vacuum system.

Internal leak is provided instrument.

Calibrate

Full/Fast

Full Spectrometer Calibration/

Fast Gain Adjustment

Test

Configuration

Set Points

Set Point: Leak Rate, Pressure, Audio

Advanced

Features

High Pressure Test, Fine Test Only,

Auto-Zero < 0, Gross Test, Transfer Points (to Test),

Stabilization Wait Time

Application

Setup

Sniff Method, Spray Method,

High Sensitivity, Auto Sequencer,

Split Flow, PPM Sniff Method

Settings

Main Settings

Date and Time, Units, Languages, Touch, and Sound

Screen Settings

Bar Graph, Range, Analog Output

Remote Control

Remote Setup with Channel Sync

Password and

Restrictions

Restriction Level, Lock Vent Control, Lock All Control

Maintenance

General

Internal Calibrated Leak Setup, Software Update

Manual Tuning

Emission, Ion, Gain Settings

Valve Control

Manually Open and Close Valves

Pump

Inspect Forepump and Exhaust Pump

Gauge

Calibration

Calibrate Thermocouple Gauge to Vacuum or Atmosphere

System Defaults

Set to Factory Defaults

System

Information

System

Information

Software Version, Internal Data

Current Setup

Set Points and Calibration Type

Turn Off

Turbo will brake. Do NOT move leak detector while turbo is

powering down.

Agilent Technologies Helium Leak Detector

G8610, G8611, and G8612 Series Quick Reference Card

You must consult operations manual, p/n G8610-90001, provided with

the leak detector, in order to operate the equipment in a safe manner.

Main Controls (Manual Section 1.5)

•Test -Measure helium leak rate

•Hold -Isolate leak detector from connected vacuum system while keeping both under vacuum

•Zero -Nullify current leak rate reading and establish a new baseline

•Vent -Bring test port to atmospheric pressure

Home Screen Display (Manual Section 1.5 and 3.11)

Application Setup (Manual Section 5.1.3)

Shutdown (Manual Section 1.3.5)

Tap the Power icon and follow the prompts.

Autres manuels pour G8610 Series

Ce manuel convient aux modèles suivants

Autres manuels Agilent Technologies Capteur de sécurité

Agilent Technologies

Agilent Technologies G2334A Manuel utilisateur

Agilent Technologies

Agilent Technologies 1100 Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 355 SCD Manuel utilisateur

Agilent Technologies

Agilent Technologies VS Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 1100 Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 1100 Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 8355 Sulfur Manuel utilisateur

Agilent Technologies

Agilent Technologies 7250 Manuel utilisateur

Agilent Technologies

Agilent Technologies G1314B VWD Manuel utilisateur

Agilent Technologies

Agilent Technologies 6820 GC Manuel utilisateur

Agilent Technologies

Agilent Technologies G1314B Manuel utilisateur

Agilent Technologies

Agilent Technologies NPD Manuel utilisateur

Agilent Technologies

Agilent Technologies 1260 Infinity Manuel utilisateur

Agilent Technologies

Agilent Technologies Helium Manuel utilisateur

Agilent Technologies

Agilent Technologies G3440-68011 Manuel utilisateur

Agilent Technologies

Agilent Technologies G3388B Manuel d'installation

Agilent Technologies

Agilent Technologies 1260 Infinity Manuel utilisateur

Agilent Technologies

Agilent Technologies 5975 Series Manuel

Agilent Technologies

Agilent Technologies PHD-4 Manuel utilisateur

Agilent Technologies

Agilent Technologies G1315B Manuel utilisateur

Agilent Technologies

Agilent Technologies 8480 Series Manuel de service

Agilent Technologies

Agilent Technologies G3437A Manuel utilisateur

Agilent Technologies

Agilent Technologies VS Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 1100 Series Manuel utilisateur

Manuels Capteur de sécurité populaires d'autres marques

THORLABS

THORLABS PDA10JT Manuel utilisateur

Waeco

Waeco UV-DETECT Manuel utilisateur

Intermatic

Intermatic IOS-DSIMF Manuel utilisateur

urmet domus

urmet domus 1083 Manuel utilisateur

Siemens

Siemens AZL66 Series Manuel utilisateur

BTI

BTI Profiline Multi Finder Manuel utilisateur

Challenger

Challenger SL01 Manuel utilisateur

DMP Electronics

DMP Electronics 1122INT Manuel utilisateur

Rielta

Rielta Ladoga MK-RK Manuel utilisateur

Mirion Technologies

Mirion Technologies ACCURAD PRD Manuel utilisateur

Bosch

Bosch DS835 Manuel utilisateur

DBI SALA

DBI SALA EZ Stop Manuel de l'opérateur

Lamptime

Lamptime ST05C Manuel utilisateur

Ubiquiti

Ubiquiti MFI-MSC Manuel utilisateur

Subsite

Subsite 910R Instructions d'installation

Satel

Satel OPAL Pro Manuel utilisateur

Aleph

Aleph XC-1XTEU Manuel utilisateur

Pima

Pima LARIS QUAD Manuel utilisateur